Measuring & Inspecting > Inspecting Detecting & Testing Instruments (ET04) - (221976 Products)
Measuring & Inspecting > Inspecting Detecting & Testing Instruments (ET04)
Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.0967; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
Item #: 05881099
Brand: GSG
Model #: GSG-CR-2.0967C
Product Specifications
| Material | Solid Carbide |
| Tolerance (Decimal Inch) | 0.00000/-0.00004 |
| Blank Number Wire Size | #7 |
| Inner Diameter (Decimal Inch) | 2.0967 |
| Calibrated | Yes |
| Traceability Certification Included | NIST |
| Go/No Go | Go |
| Standards | B47.1 Gage Standards; ASME B89.1.6 |
| UNSPSC Code | 41111619 |
$2,550.80
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Flexible Cylinder Hone:
Item #: 04694402
Brand: Tanis
Model #: 62016
Product Specifications
| Abrasive Material | Silicon Carbide |
| Grade | Extra Fine |
| Grit | 240 |
| Maximum Rpm | 900 |
| Abrasive Length (mm) | 51.00 |
| Abrasive Length (Decimal Inch) | 2.0000 |
| Abrasive Length (Inch) | 2 |
| Minimum Bore Diameter (mm) | 9.00 |
| Maximum Bore Diameter (Decimal Inch) | 0.3540 |
| Maximum Bore Diameter (mm) | 9.00 |
| Overall Length (Inch) | 8 |
| Shank Diameter (Decimal Inch) | 0.1250 |
| UNSPSC Code | 31191509 |
$30.44
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 10.00 mm Dia, 31.00 mm LOC, 1.60 mm Radius, 6 Flute, Solid Carbide
Item #: 05880489
Brand: WNT
Model #: 5364210216
Product Specifications
| Mill Diameter (mm) | 10.00 |
| Number Of Flutes | 6 |
| Length of Cut (mm) | 31.0000 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | DPX72S |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 1.60 |
| Overall Length (mm) | 83.0000 |
| Coolant Through | No |
| Chipbreaker | No |
| End Type | Corner Radius |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 10.0000 |
| Neck Diameter (mm) | 9.700 |
| UNSPSC Code | 27112803 |
| Series | 53642 |
$94.35
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
GN352-15-10-M4-S-70 RUBBER BUMPER
Item #: 07671985
Brand: J.W. Winco
Model #: 352-15-10-M4-S-70
Product Specifications
| Isolator Type | Plate/Stud |
| Insert Material | Zinc-Plated Steel |
| Isolator Material | Natural Rubber |
| Maximum Load Capacity | 410.00 |
| Top Diameter | 15.00 |
| Bottom Diameter | 15 |
| Thread Size | M4 |
| Overall Width | 15 in |
| Overall Diameter | 15 mm |
| Thread Length (Decimal Inch) | 0.3900 |
| Deflection | 0.0800 |
| Hardness Rating | Shore 70A |
| Mount Type | Threaded Stud |
| Shape | Round |
| Thread Pitch | 0.7 mm |
| Thread Standard | Metric |
| Height (Decimal Inch) | 10 mm |
| UNSPSC Code | 23153130 |
$2.68
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It