Measuring & Inspecting > Inspecting Detecting & Testing Instruments (ET04) - (221976 Products)
Measuring & Inspecting > Inspecting Detecting & Testing Instruments (ET04)
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.2742N
Item #: 19785880
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-2.2742N
Product Specifications
| Material | Solid Carbide |
| Tolerance (Decimal Inch) | +.00004/-.00000 |
| Blank Number Wire Size | #7 |
| Inner Diameter (Decimal Inch) | 2.2742 |
| Calibrated | No |
| Traceability Certification Included | No |
| Go/No Go | No Go |
| Standards | B47.1 Gage Standards; ASME B89.1.6 |
$1,540.97
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.3147N
Item #: 19713403
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-2.3147N
Product Specifications
| Material | Solid Carbide |
| Tolerance (Decimal Inch) | +.00004/-.00000 |
| Blank Number Wire Size | #7 |
| Inner Diameter (Decimal Inch) | 2.3147 |
| Calibrated | No |
| Traceability Certification Included | No |
| Go/No Go | No Go |
| Standards | B47.1 Gage Standards; ASME B89.1.6 |
$1,540.97
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 16.00 mm Dia, 50.00 mm LOC, 6 Flute, 0.06 mm Chamfer Width, Solid Carbide
Item #: 08844698
Brand: WNT
Model #: 52123160
Product Specifications
| Mill Diameter (mm) | 16.00 |
| Number Of Flutes | 6 |
| Length of Cut (mm) | 50.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Ti1000 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.06 |
| Overall Length (mm) | 110.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Extra Long |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 16.00 |
| UNSPSC Code | 23241614 |
| Series | 52123 |
$363.80
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 18.00 mm Dia, 35.00 mm LOC, 8 Flute, 0.07 mm Chamfer Width, Solid Carbide
Item #: 08847378
Brand: WNT
Model #: 52122181
Product Specifications
| Mill Diameter (mm) | 18.00 |
| Number Of Flutes | 8 |
| Length of Cut (mm) | 35.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Ti1000 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.07 |
| Overall Length (mm) | 93.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Long |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (mm) | 18.00 |
| Neck Diameter (mm) | 17.800 |
| UNSPSC Code | 23241614 |
| Series | 52122 |
$301.11
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 18.00 mm Dia, 35.00 mm LOC, 8 Flute, 0.07 mm Chamfer Width, Solid Carbide
Item #: 08847337
Brand: WNT
Model #: 52122180
Product Specifications
| Mill Diameter (mm) | 18.00 |
| Number Of Flutes | 8 |
| Length of Cut (mm) | 35.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Ti1000 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.07 |
| Overall Length (mm) | 93.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Long |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 18.00 |
| Neck Diameter (mm) | 17.800 |
| UNSPSC Code | 23241614 |
| Series | 52122 |
$301.11
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 25.00 mm Dia, 55.00 mm LOC, 8 Flute, 0.08 mm Chamfer Width, Solid Carbide
Item #: 08847071
Brand: WNT
Model #: 52122250
Product Specifications
| Mill Diameter (mm) | 25.00 |
| Number Of Flutes | 8 |
| Length of Cut (mm) | 55.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Ti1000 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.08 |
| Overall Length (mm) | 125.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Long |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 25.00 |
| Neck Diameter (mm) | 24.800 |
| UNSPSC Code | 23241614 |
| Series | 52122 |
$616.34
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 0.50 mm Dia, 0.70 mm LOC, 2 Flute, Solid Carbide
Item #: 08843195
Brand: Mitsubishi
Model #: 288833
Product Specifications
| Mill Diameter (mm) | 0.50 |
| Mill Diameter (Decimal Inch) | 0.0197 |
| Number Of Flutes | 2 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 0.0276 |
| Length of Cut (mm) | 0.70 |
| Shank Diameter (mm) | 4.00 |
| Shank Diameter (Decimal Inch) | 0.1575 |
| Overall Length (mm) | 50.00 |
| Overall Length (Decimal Inch) | 1.9685 |
| Single Or Double End | Single |
| Coating/Finish Family | AlTiN |
| Centercutting | No |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | Yes |
| Coolant Through | No |
| Helix Angle | 30 |
| Primary Workpiece Material | Cast Iron; Steel |
| Primary Workpiece Material Code | P; K |
| Secondary Workpiece Material | Aluminum & Non-Ferrous; High-Temp Alloy; Stainless Steel; Hardened Materials |
| Secondary Workpiece Material Code | S; H; M; N |
| Coating/Finish | AlTiN |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Helical |
| Shank Type | Straight |
| Material Grade | Carbide |
| Length Type | Long |
| Neck Length (Decimal Inch) | 0.5906 |
| Neck Length (mm) | 15.00 |
| Neck Diameter (Decimal Inch) | 0.0181 |
| Neck Diameter (mm) | 0.46 |
| Mill Diameter Tolerance | -0.010; 0 |
| Shank Diameter Tolerance | h6 |
| Series | M-Star Endmill MS2XL |
| System Of Measurement | Metric |
| UNSPSC Code | 27112803 |
$104.77
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 1.00 mm Dia, 1.50 mm LOC, 2 Flute, Solid Carbide
Item #: 08843252
Brand: Mitsubishi
Model #: 289094
Product Specifications
| Mill Diameter (mm) | 1.00 |
| Mill Diameter (Decimal Inch) | 0.0394 |
| Number Of Flutes | 2 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 0.0591 |
| Length of Cut (mm) | 1.50 |
| Shank Diameter (mm) | 4.00 |
| Shank Diameter (Decimal Inch) | 0.1575 |
| Overall Length (mm) | 50.00 |
| Overall Length (Decimal Inch) | 1.9685 |
| Single Or Double End | Single |
| Coating/Finish Family | AlTiN |
| Centercutting | No |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | Yes |
| Coolant Through | No |
| Helix Angle | 30 |
| Primary Workpiece Material | Cast Iron; Steel |
| Primary Workpiece Material Code | P; K |
| Secondary Workpiece Material | Aluminum & Non-Ferrous; High-Temp Alloy; Stainless Steel; Hardened Materials |
| Secondary Workpiece Material Code | S; H; M; N |
| Coating/Finish | AlTiN |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Helical |
| Shank Type | Straight |
| Material Grade | Carbide |
| Length Type | Long |
| Neck Length (Decimal Inch) | 0.3150 |
| Neck Length (mm) | 8.00 |
| Neck Diameter (Decimal Inch) | 0.0370 |
| Neck Diameter (mm) | 0.94 |
| Mill Diameter Tolerance | -0.010; 0 |
| Shank Diameter Tolerance | h6 |
| Series | M-Star Endmill MS2XL |
| System Of Measurement | Metric |
| UNSPSC Code | 27112803 |
$52.39
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 1.00 mm Dia, 1.50 mm LOC, 2 Flute, Solid Carbide
Item #: 08843245
Brand: Mitsubishi
Model #: 289115
Product Specifications
| Mill Diameter (mm) | 1.00 |
| Mill Diameter (Decimal Inch) | 0.0394 |
| Number Of Flutes | 2 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 0.0591 |
| Length of Cut (mm) | 1.50 |
| Shank Diameter (mm) | 4.00 |
| Shank Diameter (Decimal Inch) | 0.1575 |
| Overall Length (mm) | 50.00 |
| Overall Length (Decimal Inch) | 1.9685 |
| Single Or Double End | Single |
| Coating/Finish Family | AlTiN |
| Centercutting | No |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | Yes |
| Coolant Through | No |
| Helix Angle | 30 |
| Primary Workpiece Material | Cast Iron; Steel |
| Primary Workpiece Material Code | P; K |
| Secondary Workpiece Material | Aluminum & Non-Ferrous; High-Temp Alloy; Stainless Steel; Hardened Materials |
| Secondary Workpiece Material Code | S; H; M; N |
| Coating/Finish | AlTiN |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | No |
| Flute Type | Helical |
| Shank Type | Straight |
| Material Grade | Carbide |
| Length Type | Long |
| Neck Length (Decimal Inch) | 0.4724 |
| Neck Length (mm) | 12.00 |
| Neck Diameter (Decimal Inch) | 0.0370 |
| Neck Diameter (mm) | 0.94 |
| Mill Diameter Tolerance | -0.010; 0 |
| Shank Diameter Tolerance | h6 |
| Series | M-Star Endmill MS2XL |
| System Of Measurement | Metric |
| UNSPSC Code | 27112803 |
$52.39
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 1/8" Dia, 3/4" LOC, 0.0100" Radius, 4 Flute, Solid Carbide
Item #: 08815110
Brand: Walter-Prototyp
Model #: 8417432
Product Specifications
| Mill Diameter (Inch) | 1/8 |
| Number Of Flutes | 4 |
| Length of Cut (Inch) | 3/4 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | nACRo |
| Overall Length (Inch) | 2-1/2 |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.0100 |
| Cutting Direction | Right Hand |
| Coolant Through | No |
| Chipbreaker | No |
| Extended Reach | Yes |
| Shank Type | Straight-Cylindrical |
| Material Removal Type | Roughing & Finishing |
| Shank Diameter (Inch) | 1/8 |
| Reach Length (Decimal Inch) | 1.8701 |
| Shank Diameter Tolerance | h6 |
| Primary Workpiece Material | Superalloys & Titanium |
| UNSPSC Code | 27112803 |
| Primary Workpiece Material Code | S |
| Secondary Workpiece Material | Stainless Steel; Steel |
| Secondary Workpiece Material Code | P; M |
| Series | MA377.A-4-R |
| Proprietary Coating Designation | WJ30EN |
| Manufacturers Catalog Number | MA377.3.18A4L025X-WJ30EN |
$48.56
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 1/2" Dia, 5/8" LOC, 0.0150" Radius, 5 Flute, Solid Carbide
Item #: 08814907
Brand: Walter-Prototyp
Model #: 8417674
Product Specifications
| Mill Diameter (Inch) | 1/2 |
| Number Of Flutes | 5 |
| Length of Cut (Inch) | 5/8 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | nACo |
| Overall Length (Inch) | 8 |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.0150 |
| Cutting Direction | Right Hand |
| Coolant Through | No |
| Chipbreaker | No |
| Extended Reach | Yes |
| Shank Type | Straight-Cylindrical |
| Material Removal Type | Roughing & Finishing |
| Shank Diameter (Inch) | 1/2 |
| Reach Length (Decimal Inch) | 6.5039 |
| Shank Diameter Tolerance | h6 |
| Primary Workpiece Material | Superalloys & Titanium |
| UNSPSC Code | 27112803 |
| Primary Workpiece Material Code | S |
| Secondary Workpiece Material | Stainless Steel; Steel |
| Secondary Workpiece Material Code | P; M |
| Series | MA377.A-5-R |
| Proprietary Coating Designation | WJ30EM |
| Manufacturers Catalog Number | MA377.12.7A5P038-WJ30EM |
$185.87
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 25.00 mm Dia, 75.00 mm LOC, 8 Flute, 0.08 mm Chamfer Width, Solid Carbide
Item #: 08799439
Brand: WNT
Model #: 52123250
Product Specifications
| Mill Diameter (mm) | 25.00 |
| Number Of Flutes | 8 |
| Length of Cut (mm) | 75.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Ti1000 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.08 |
| Overall Length (mm) | 150.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Extra Long |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 25.00 |
| UNSPSC Code | 23241614 |
| Series | 52123 |
$1,014.66
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 1/4" Dia, 3/4" LOC, 0.0200" Radius, 4 Flute, Solid Carbide
Item #: 08814659
Brand: Walter-Prototyp
Model #: 8417449
Product Specifications
| Mill Diameter (Inch) | 1/4 |
| Number Of Flutes | 4 |
| Length of Cut (Inch) | 3/4 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | nACo |
| Overall Length (Inch) | 2-1/2 |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.0200 |
| Cutting Direction | Right Hand |
| Coolant Through | No |
| Chipbreaker | No |
| Extended Reach | Yes |
| Shank Type | Straight-Cylindrical |
| Material Removal Type | Roughing & Finishing |
| Shank Diameter (Inch) | 1/4 |
| Reach Length (Decimal Inch) | 1.3976 |
| Shank Diameter Tolerance | h6 |
| Primary Workpiece Material | Superalloys & Titanium |
| UNSPSC Code | 27112803 |
| Primary Workpiece Material Code | S |
| Secondary Workpiece Material | Stainless Steel; Steel |
| Secondary Workpiece Material Code | P; M |
| Series | MA377.A-4-R |
| Proprietary Coating Designation | WJ30EM |
| Manufacturers Catalog Number | MA377.6.35A4D051J-WJ30EM |
$42.19
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 7.00 mm Dia, 22.00 mm LOC, 6 Flute, 0.04 mm Chamfer Width, Solid Carbide
Item #: 08795288
Brand: WNT
Model #: 5201607000
Product Specifications
| Mill Diameter (mm) | 7.00 |
| Number Of Flutes | 6 |
| Length of Cut (mm) | 22.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Bright/Uncoated |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.04 |
| Overall Length (mm) | 70.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Long |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 8.00 |
| Neck Diameter (mm) | 6.800 |
| UNSPSC Code | 23241614 |
| Series | 52016 |
| Coating Classification | Uncoated |
$45.53
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 20.00 mm Dia, 55.00 mm LOC, 8 Flute, 0.07 mm Chamfer Width, Solid Carbide
Item #: 08799884
Brand: WNT
Model #: 52123200
Product Specifications
| Mill Diameter (mm) | 20.00 |
| Number Of Flutes | 8 |
| Length of Cut (mm) | 55.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Ti1000 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.07 |
| Overall Length (mm) | 115.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Extra Long |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 20.00 |
| UNSPSC Code | 23241614 |
| Series | 52123 |
$517.94
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 11.00 mm Dia, 16.00 mm LOC, 4 Flute, 0.30 mm Chamfer Width, Solid Carbide
Item #: 08797920
Brand: WNT
Model #: 52223110
Product Specifications
| Mill Diameter (mm) | 11.00 |
| Number Of Flutes | 4 |
| Length of Cut (mm) | 16.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | APX72S |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.30 |
| Overall Length (mm) | 73.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Short |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 12.00 |
| Neck Diameter (mm) | 10.500 |
| UNSPSC Code | 23241614 |
| Series | 52223 |
$102.40
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 9.00 mm Dia, 25.00 mm LOC, 6 Flute, 0.04 mm Chamfer Width, Solid Carbide
Item #: 08795262
Brand: WNT
Model #: 5201609000
Product Specifications
| Mill Diameter (mm) | 9.00 |
| Number Of Flutes | 6 |
| Length of Cut (mm) | 25.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Bright/Uncoated |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.04 |
| Overall Length (mm) | 73.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Long |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 10.00 |
| Neck Diameter (mm) | 8.800 |
| UNSPSC Code | 23241614 |
| Series | 52016 |
| Coating Classification | Uncoated |
$74.43
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 10.00 mm Dia, 14.00 mm LOC, 4 Flute, 0.30 mm Chamfer Width, Solid Carbide
Item #: 08797938
Brand: WNT
Model #: 52223100
Product Specifications
| Mill Diameter (mm) | 10.00 |
| Number Of Flutes | 4 |
| Length of Cut (mm) | 14.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | APX72S |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.30 |
| Overall Length (mm) | 66.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Short |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 10.00 |
| Neck Diameter (mm) | 9.500 |
| UNSPSC Code | 23241614 |
| Series | 52223 |
$66.72
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 5.00 mm Dia, 9.00 mm LOC, 4 Flute, 0.18 mm Chamfer Width, Solid Carbide
Item #: 08799090
Brand: WNT
Model #: 52223050
Product Specifications
| Mill Diameter (mm) | 5.00 |
| Number Of Flutes | 4 |
| Length of Cut (mm) | 9.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | APX72S |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.18 |
| Overall Length (mm) | 54.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Short |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 6.00 |
| Neck Diameter (mm) | 4.800 |
| UNSPSC Code | 23241614 |
| Series | 52223 |
$36.05
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 8.00 mm Dia, 22.00 mm LOC, 6 Flute, 0.04 mm Chamfer Width, Solid Carbide
Item #: 08796070
Brand: WNT
Model #: 5201508000
Product Specifications
| Mill Diameter (mm) | 8.00 |
| Number Of Flutes | 6 |
| Length of Cut (mm) | 22.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Bright/Uncoated |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.04 |
| Overall Length (mm) | 70.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Long |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (mm) | 8.00 |
| Neck Diameter (mm) | 7.800 |
| UNSPSC Code | 23241614 |
| Series | 52015 |
| Coating Classification | Uncoated |
$46.82
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It