Products
- Tanis - 1/4" Arbor Hole to 3/4" Shank Diam Drive Arbor - For 6" Tanis Disc Brushes, Flow Through Spindle
- Brush Research Mfg. - Brush Arbors Product Compatibility: NamPower Disc Brush Arbor Type: Threaded Adapter
- Brush Research Mfg. - Brush Arbors Product Compatibility: NamPower Disc Brush Arbor Type: Threaded Adapter
- Ampco - 1/2" Arbor Hole Drive Arbor - For 6" Wheel Brushes, Attached Spindle
- Osborn - 7/8" Arbor Hole to 3/4" Shank Diam Drive Arbor - For 10, 12 & 14" UNI LOK Disc Brushes, Attached Spindle, Flow Through Spindle
- Weiler - 7/8" Arbor Hole to 3/4" Shank Diam Drive Arbor - For 8 & 9" Weiler Disc Brushes, Flow Through Spindle
- Weiler - 1/2" Arbor Hole to 1/4" Shank Diam Drive Arbor - For 3" Small Diam Wheel Brushes
- Tanis - 5/8" Arbor Hole to 1/4" Shank Diam Drive Arbor - For 3" Small Diam Wheel Brushes
- Tanis - 1/4" Arbor Hole to 3/4" Shank Diam Drive Arbor - For 10, 12 & 14" Tanis Disc Brushes, Flow Through Spindle
- Brush Research Mfg. - Brush Arbors Product Compatibility: NamPower Disc Brush Arbor Type: Threaded Adapter
- Brush Research Mfg. - Brush Arbors Product Compatibility: NamPower Disc Brush Arbor Type: Threaded Adapter
- Weiler - 7/8" Arbor Hole to 3/4" Shank Diam Drive Arbor - For 5 & 6" Weiler Disc Brushes, Flow Through Spindle
- Brush Research Mfg. - Brush Arbors Product Compatibility: NamPower Disc Brush Arbor Type: Threaded Adapter
- Burr King - 0.66 Cu Ft, 1/5 hp, Vibratory Tumbler - Adjustable Amplitude, Flow Through Drain
- Brush Research Mfg. - Brush Arbors Product Compatibility: NamPower Disc Brush Arbor Type: Drive Arbor
- Weiler - 3/8" Arbor Hole to 1/4" Shank Diam Drive Arbor - For 3" Small Diam Wheel Brushes
- Tanis - 1/4" Arbor Hole to 3/4" Shank Diam Drive Arbor - For 3, 4 & 5" Tanis Disc Brushes, Flow Through Spindle
- Tanis - 1/4" Arbor Hole to 3/4" Shank Diam Drive Arbor - For 8" Tanis Disc Brushes, Flow Through Spindle
- Tanis - 1/2" Arbor Hole to 1/2" Shank Diam Drive Arbor - For 3" Tanis Disc Brushes, Flow Through Spindle
- Brush Research Mfg. - 31/32" Arbor Hole to 0.968" Shank Diam Sidelock Collet - For 4, 5 & 6" NamPower Disc Brushes, Attached Spindle, Flow Through Spindle
- Weiler - 7/8" Arbor Hole to 3/4" Shank Diam Drive Arbor - For 3, 4 & 5" Weiler Disc Brushes, Attached Spindle, Flow Through Spindle
- Weiler - 7/8" Arbor Hole to 3/4" Shank Diam Drive Arbor - For 8" Weiler Disc Brushes
- Brush Research Mfg. - Brush Arbors Product Compatibility: NamPower Disc Brush Arbor Type: Drive Arbor
- Brush Research Mfg. - 31/32" Arbor Hole to 0.968" Shank Diam Standard Collet - For 4, 5 & 6" NamPower Disc Brushes, Attached Spindle, Flow Through Spindle
- Osborn - 1/4" Arbor Hole to 1/4" Shank Diam Drive Arbor - For Small Diam Wheel Brushes
- Osborn - 1/2" Arbor Hole to 3/4" Shank Diam CNC Adapter - For 3, 4, 5, 6, 7 & 8" Osborn Composite Disc Brushes
- Weiler - 7/8" Arbor Hole to 3/4" Shank Diam Drive Arbor - For 6" Weiler Disc Brushes, Attached Spindle, Flow Through Spindle
- Tanis - 1/4" Arbor Hole to 3/4" Shank Diam Drive Arbor - For 6" Tanis Disc Brushes, Flow Through Spindle
- Osborn - 7/8" Arbor Hole to 3/4" Shank Diam Drive Arbor - For 6 & 7" UNI LOK Disc Brushes, Attached Spindle, Flow Through Spindle
- Weiler - 7/8" Arbor Hole to 3/4" Shank Diam Drive Arbor - For 10 & 12" Weiler Disc Brushes, Flow Through Spindle
- Osborn - 1/4" Arbor Hole to 1/4" Shank Diam Drive Arbor - For Small Diam Wheel Brushes
- Osborn - 3/16" Arbor Hole to 3/16" Shank Diam Drive Arbor - For Small Diam Wheel Brushes
- Tanis - 1/2" Arbor Hole to 1/4" Shank Diam Drive Arbor - For 3" Small Diam Wheel Brushes
- Osborn - 1/4" Arbor Hole to 1/4" Shank Diam Drive Arbor - For Small Diam Wheel Brushes
- Osborn - 7/8" Arbor Hole to 3/4" Shank Diam Drive Arbor - For 3, 4 & 5" UNI LOK Disc Brushes, Attached Spindle, Flow Through Spindle
- Tanis - Composite Disc Bridle - 5" Bridle Diam & Brush Compatibility
- Tanis - Composite Disc Bridle - 2" Bridle Diam & Brush Compatibility
- Osborn - 7/8" Arbor Hole to 3/4" Shank Diam Drive Arbor - For 8 & 9" UNI LOK Disc Brushes, Attached Spindle, Flow Through Spindle
- Brush Research Mfg. - Brush Arbors Product Compatibility: NamPower Disc Brush Arbor Type: Threaded Adapter
- Tanis - Composite Disc Bridle - 2" Bridle Diam & Brush Compatibility
- Tanis - Composite Disc Bridle - 3" Bridle Diam & Brush Compatibility
- Tanis - Composite Disc Bridle - 3" Bridle Diam & Brush Compatibility
- Weiler - 3/8" Diam Brush Mandrel - 1-3/4" Long, 1/4-20 Thread
- Tanis - Composite Disc Bridle - 6" Bridle Diam & Brush Compatibility
- Tanis - Composite Disc Bridle - 10" Bridle Diam & Brush Compatibility
- Tanis - Composite Disc Bridle - 2" Bridle Diam & Brush Compatibility
- Weiler - 1/4" Diam Brush Mandrel - 1-3/4" Long, 1/4-20 Thread
- Tanis - Composite Disc Bridle - 8" Bridle Diam & Brush Compatibility
- Weiler - 1/2" Diam Brush Mandrel - 1-3/4" Long, 1/4-20 Thread
- Brush Research Mfg. - Brush Mounting Drive Lock - Compatible with 4" All Nampower
- Weiler - 1-1/4" ID x 5-5/8" OD Brush Mounting Flange - Compatible with 3-1/4 & 4-1/4" ID Wheel Brushes
- Weiler - 1-1/2" ID x 6-1/2" OD Brush Mounting Flange - Compatible with 5-1/4" ID Wheel Brushes
- Weiler - Brush Mounting Replacement Kit - Compatible with All Size Weiler Disc Brushes
- Weiler - 1" ID x 5-5/8" OD Brush Mounting Metal Adapter - Compatible with 3-1/4 & 4-1/4" ID Wheel Brushes
- Dynabrade - Brush Mounting Wheel Hub Assembly - Compatible with DynaZip Air Tools
- Dynabrade - Brush Mounting Wheel Hub Assembly - Compatible with 4" DynaZip Surface Preparation Tools
- Tanis - Brush Mounting Wheel Hub Assembly - Compatible with All Size Wheel Brushes
- Osborn - Brush Mounting Channel Clip - Compatible with Strip Brushes
- Brush Research Mfg. - Brush Mounting Drive Lock - Compatible with 4" All Nampower
- Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 3/8; Flute Type: Helical; Number Of Flutes: 8; End Mill Material: Solid Carbide; Length of Cut (Inch): 3/4; Coating/Finish: AlCrN
- Weiler - 2" ID x 8-3/4" OD Brush Mounting Flange - Compatible with 7-1/4" ID Wheel Brushes
- Osborn - Brush Mounting CNC Adapter - Compatible with 6, 7, 8 & 9" ATB Brushes
- Weiler - 1-1/2" ID x 8-3/4" OD Brush Mounting Flange - Compatible with 7-1/4" ID Wheel Brushes
- Weiler - 1-1/4" ID x 6-1/2" OD Brush Mounting Flange - Compatible with 5-1/4" ID Wheel Brushes
- Weiler - 1-1/4" ID x 8-3/4" OD Brush Mounting Flange - Compatible with 7-1/4" ID Wheel Brushes
- WALTER Surface Technologies - Brush Mounting Silicone Ring
- Weiler - 2" ID x 5-5/8" OD Brush Mounting Flange - Compatible with 3-1/4 & 4-1/4" ID Wheel Brushes
- Osborn - Brush Mounting Channel Clip - Compatible with Strip Brushes
- Weiler - 2" ID x 6-1/2" OD Brush Mounting Flange - Compatible with 5-1/4" ID Wheel Brushes
- Allied Machine and Engineering - 27/32 x 10-15/32" Through-Hole Lap
- Weiler - 3/4" ID x 5-5/8" OD Brush Mounting Flange - Compatible with 3-1/4 & 4-1/4" ID Wheel Brushes
- Value Collection - 6" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 5/16-18 Female Thread
- Osborn - 12" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 1/4" Shank Diam, 12" OAL
- Osborn - Brush Mounting CNC Adapter - Compatible with 4" ATB Brushes
- Brush Research Mfg. - Tube Brush Pipe Nipple Adapter - 1/2 NPT Male Thread
- Value Collection - 36" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 1/4-20 Female Thread
- Value Collection - 6" Long x 3/8" Rod Diam, Tube Brush Extension Rod - 1/2-12 Female Thread
- Osborn - 6" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 1/4" Shank Diam, 6" OAL
- Osborn - 3-5/8" Long, 1/8" Shank Diam, 1/4" Holder Diam, Tube Brush Extension Rod - Compatible with 1/8" Shank Diam
- Osborn - 3-5/8" Long, 3/16" Holder Diam, Tube Brush Extension Rod - Male Thread
- Value Collection - 24" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 1/4-20 Female Thread
- Brush Research Mfg. - Tube Brush Pipe Nipple Adapter - 1/8 NPT Male Thread
- Value Collection - 12" Long x 3/8" Rod Diam, Tube Brush Extension Rod - 1/2-12 Male Thread
- Osborn - 3-3/8" Long, 1/4" Holder Diam, Tube Brush Extension Rod - 3/32" Shank Diam
- Brush Research Mfg. - Tube Brush Pipe Nipple Adapter - 3/4 NPT Male Thread
- Brush Research Mfg. - 18" Long, Tube Brush Extension Rod - 1/4 NPT Female Thread
- Osborn - 3-3/8" Long, 1/8" Shank Diam, 3/8" Holder Diam, Tube Brush Extension Rod - Compatible with 1/8" Shank Diam
- Value Collection - 48" Long x 3/8" Rod Diam, Tube Brush Extension Rod - 1/2-12 Female Thread
- Value Collection - 6" Long x 3/8" Rod Diam, Tube Brush Extension Rod - 1/2-12 Male Thread
- Value Collection - 12" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 3/16-24 Male Thread
- Value Collection - 36" Long x 3/8" Rod Diam, Tube Brush Extension Rod - 1/2-12 Male Thread
- Value Collection - 24" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 3/16-24 Male Thread
- Value Collection - 12" Long x 3/8" Rod Diam, Tube Brush Extension Rod - 1/2-12 Female Thread
- Value Collection - 48" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 1/4-20 Female Thread
- Value Collection - 24" Long x 3/8" Rod Diam, Tube Brush Extension Rod - 1/2-20 Male Thread
- Value Collection - 24" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 5/16-18 Male Thread
- Brush Research Mfg. - 36" Long, Tube Brush Extension Rod - 1/4 NPT Female Thread
- Brush Research Mfg. - 36" Long, Tube Brush Extension Rod - 1/8 NPT Female Thread
- Value Collection - 48" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 5/16-18 Female Thread
- Value Collection - 36" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 1/4-20 Male Thread
- Value Collection - 12" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 3/16-24 Female Thread
- Value Collection - 48" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 1/4-20 Male Thread
- Red Head - 12" Long x 3/8" Rod Diam, Tube Brush Extension Rod - 3/8" Shank Diam, 12" OAL
- Value Collection - 6" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 1/4-20 Female Thread
- Value Collection - 48" Long x 3/8" Rod Diam, Tube Brush Extension Rod - 1/2-12 Male Thread
- Value Collection - 24" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 1/4-20 Male Thread
- Value Collection - 48" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 3/16-24 Male Thread
- Value Collection - 6" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 5/16-18 Male Thread
- Value Collection - 48" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 3/16-24 Female Thread
- Value Collection - 36" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 5/16-18 Male Thread
- Brush Research Mfg. - Tube Brush Pipe Nipple Adapter - 1/4 NPT Male Thread
- Brush Research Mfg. - Tube Brush Pipe Nipple Adapter - 3/8 NPT Male Thread
- Value Collection - 24" Long x 3/8" Rod Diam, Tube Brush Extension Rod - 1/2-20 Female Thread
- Brush Research Mfg. - 18" Long, Tube Brush Extension Rod - 1/8 NPT Female Thread
- Value Collection - 12" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 5/16-18 Male Thread
- Value Collection - 36" Long x 3/8" Rod Diam, Tube Brush Extension Rod - 1/2-12 Female Thread
- Value Collection - 36" Long x 1/4" Rod Diam, Tube Brush Extension Rod - 3/16-24 Female Thread
- Weiler - 5-1/4" to 3/4" Wire Wheel Adapter - Metal Adapter
- Weiler - 2" to 1-1/4" Wire Wheel Adapter - Metal Adapter
- Weiler - 2" to 1" Wire Wheel Adapter - Metal Adapter
- Osborn - 4-1/4" to 1" Wire Wheel Adapter - Metal Adapter
- WALTER Surface Technologies - 5/8-11 to 3/8-16 Wire Wheel Adapter
- Osborn - 2" to 1-1/4" Wire Wheel Adapter - Metal Adapter
- Osborn - 5/8" to 1-1/4" Wire Wheel Adapter - Metal Adapter
- Weiler - 2" to 1/2" Wire Wheel Adapter - Metal Adapter
- Osborn - 1" to 1-1/4" Wire Wheel Adapter - Metal Adapter
- Osborn - 5-1/4" to 1-1/4" Wire Wheel Adapter - Metal Adapter
- Weiler - 2" to 1-1/2" Wire Wheel Adapter - Metal Adapter
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.3553; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- Tanis - 2" to 1-1/4" Wire Wheel Adapter - Metal Adapter
- ESD Task Chair: ESD Vinyl, 29" Seat Height, Blue
- Weiler - 5-1/4" to 1-1/4" Wire Wheel Adapter - Metal Adapter
- Osborn - 5/8" to 2" Wire Wheel Adapter - Metal Adapter
- Osborn - 1" to 2" Wire Wheel Adapter - Metal Adapter
- Camel Grinding Wheels - 2" to 1" Wire Wheel Adapter - Metal Adapter
- Camel Grinding Wheels - 2" to 1-1/4" Wire Wheel Adapter - Metal Adapter
- Weiler - 5/8-11 to M10x1.25 Wire Wheel Adapter - Metal Adapter
- Osborn - 1/2" to 1-1/4" Wire Wheel Adapter - Metal Adapter
- Camel Grinding Wheels - 2" to 1/2" Wire Wheel Adapter - Metal Adapter
- Weiler - 3-1/4" to 7/8" Wire Wheel Adapter - Metal Adapter
- Weiler - 2" to 5/8" Wire Wheel Adapter - Metal Adapter
- Tanis - 2" to 3/4" Wire Wheel Adapter - Metal Adapter
- Barrier Posts; Post Type: Standard Post; Post Material: Polyethylene, Plastic; Base Material: Plastic; Surface Style: Solid Color
- Osborn - 4-1/4" to 1-1/2" Wire Wheel Adapter - Metal Adapter
- Osborn - 5/8" Original Arbor Hole Size Wire Wheel Adapter
- WALTER Surface Technologies - 5/8-11 to M10x1.25 Wire Wheel Adapter - Standard to Metric
- Osborn - 1-1/2" to 2" Wire Wheel Adapter - Metal Adapter
- Indexable Grooving/Cut-Off Toolholders; Internal or External: External; Hand of Holder: Left Hand; Maximum Depth of Cut (mm): 8.00; Maximum Groove Width (Decimal Inch): 0.1250
- Indexable Grooving/Cut-Off Toolholders; Internal or External: External; Hand of Holder: Left Hand; Maximum Depth of Cut (mm): 17.00; Maximum Groove Width (Decimal Inch): 0.1875
- Weiler - 5/8-11 to M10x1.50 Wire Wheel Adapter - Metal Adapter
- Tanis - 2" to 1/2" Wire Wheel Adapter - Metal Adapter
- Weiler - 2" to 7/8" Wire Wheel Adapter - Metal Adapter
- Osborn - 1/2" to 2" Wire Wheel Adapter - Metal Adapter
- Indexable Grooving/Cut-Off Toolholders; Internal or External: External; Hand of Holder: Right Hand; Maximum Depth of Cut (mm): 19.00; Maximum Groove Width (mm): 5.05
- Clean Room Task Chair: Vinyl, 29" Seat Height, Sterling
- Weiler - 3-1/4" to 1-1/4" Wire Wheel Adapter - Metal Adapter
- Weiler - 5-1/4" to 2" Wire Wheel Adapter - Metal Adapter
- Tanis - 2" to 1" Wire Wheel Adapter - Metal Adapter
- Tanis - 2" to 7/8" Wire Wheel Adapter - Metal Adapter
- Camel Grinding Wheels - 2" to 5/8" Wire Wheel Adapter - Metal Adapter
- Tanis - 2" to 1-1/2" Wire Wheel Adapter - Metal Adapter
- Osborn - 7/8" to 2" Wire Wheel Adapter - Metal Adapter
- Osborn - 1-1/4" to 2" Wire Wheel Adapter - Metal Adapter
- Weiler - 3-1/4" to 5/8" Wire Wheel Adapter - Metal Adapter
- Osborn - 1-1/4" to 5/8" Wire Wheel Adapter - Metal Adapter
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.4814; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- Weiler - 5/8-11 to 3/8-24 Wire Wheel Adapter - Metal Adapter
- Tanis - 4-1/4" to 2" Wire Wheel Adapter - Metal Adapter
- Osborn - 3/4" to 2" Wire Wheel Adapter - Metal Adapter
- WALTER Surface Technologies - 5/8-11 to M10x1.50 Wire Wheel Adapter - Standard to Metric
- Camel Grinding Wheels - 2" to 3/4" Wire Wheel Adapter - Metal Adapter
- WALTER Surface Technologies - 5/8-11 to 3/8-24 Wire Wheel Adapter
- Osborn - 4-1/4" to 1-1/4" Wire Wheel Adapter - Metal Adapter
- Osborn - 2" to 7/8" Wire Wheel Adapter - Metal Adapter
- 3" Diam x 1-3/4" Wide x 3-3/4" OAH Stem Mount Swivel Caster with Brake
- Osborn - 5-1/4" to 2" Wire Wheel Adapter - Metal Adapter
- Osborn - 5-1/4" to 1-1/2" Wire Wheel Adapter - Metal Adapter
- Square End Mill: 0.0300" Dia, 0.0900" LOC, 4 Flute, Solid Carbide
- Osborn - 1-1/4" to 7/8" Wire Wheel Adapter - Metal Adapter
- Weiler - 2" to 3/4" Wire Wheel Adapter - Metal Adapter
- PRO-SOURCE - 11 Piece Stainless Steel Hand Tube Brush Set - 3/4" to 1-1/2" Brush Length, 4" OAL, 0.034" Shank Diam, Includes Brush Diams 1/4", 5/16", 3/8", 1/2" & 3/4"
- Hyde Tools - 3 Piece Brass Hand Wire Brush Set - 2" Brush Length, 7" OAL, 1/2" Shank Diam
- Tanis - 2" to 5/8" Wire Wheel Adapter - Metal Adapter
- PRO-SOURCE - 4 Piece Stainless Steel Hand Tube Brush Set - 1-1/2" Brush Length, 8" OAL, 0.016" Shank Diam, Includes Brush Diams 1/8", 1/4", 3/8" & 1/2"
- PRO-SOURCE - 11 Piece Nylon Hand Tube Brush Set - 3/4" to 1-1/2" Brush Length, 4" OAL, 0.034" Shank Diam, Includes Brush Diams 1/4", 5/16", 3/8", 1/2" & 3/4"
- PRO-SOURCE - 5 Piece Stainless Steel Hand Tube Brush Set - 1/2" to 3/4" Brush Length, 4" OAL, 0.022" Shank Diam
- Weiler - 3-1/4" to 1" Wire Wheel Adapter - Metal Adapter
- PRO-SOURCE - 6 Piece Nylon Hand Tube Brush Set - 1/2" to 3/4" Brush Length, 4" OAL, 0.022" Shank Diam
- PRO-SOURCE - 4 Piece Brass Hand Tube Brush Set - 1-1/2" Brush Length, 8" OAL, 0.016" Shank Diam, Includes Brush Diams 1/8", 1/4", 3/8" & 1/2"
- Hyde Tools - 3 Piece Brass, Nylon & Stainless Hand Brush Set - 6-1/2" Brush Length, 0.1mm Trim Length
- PRO-SOURCE - 4 Piece Nylon Hand Tube Brush Set - 1-1/2" Brush Length, 8" OAL, 0.016" Shank Diam, Includes Brush Diams 1/8", 1/4", 3/8" & 1/2"
- PRO-SOURCE - 5 Piece Brass Hand Tube Brush Set - 1/2" to 3/4" Brush Length, 4" OAL, 0.022" Shank Diam
- PRO-SOURCE - 11 Piece Brass Hand Tube Brush Set - 3/4" to 1-1/2" Brush Length, 4" OAL, 0.034" Shank Diam, Includes Brush Diams 1/4", 5/16", 3/8", 1/2" & 3/4"
- Water Cooler & Fountain: 8.0 GPH Cooling Capacity
- O-Cedar - 4 Columns x 16 Rows, Steel Wire Brush - 7" Brush Length, 10" OAL, 1-1/8" Trim Length, Wood Shoe Handle
- Ball End Mill: 1/32" Dia, 3/64" LOC, 3 Flute, Solid Carbide
- Weiler - 4 Rows x 16 Columns Shoe Handle Steel Scratch Brush - 5" Brush Length, 10" OAL, 1" Trim Length, Wood Shoe Handle
- Attachment
- Osborn - 4 Rows x 19 Columns Stainless Steel Scratch Brush - 6" Brush Length, 13-11/16" OAL, 1-1/8" Trim Length, Wood Curved Handle
- Bulk Storage Container: Collapsible Wood Crate
- Weiler - 4 Rows x 16 Columns Steel Scratch Brush - 5" Brush Length, 10" OAL, 1-3/16" Trim Length, Wood Shoe Handle
- Osborn - 4 Rows x 18 Columns Stainless Steel Plater's Brush - 5-3/4" Brush Length, 13-1/4" OAL, 1" Trim Length, Wood Curved Handle
- Brush Research Mfg. - 4 Rows x 16 Columns Brass Scratch Brush - 4-3/4" Brush Length, 10-1/4" OAL, 1-1/8 Trim Length, Wood Shoe Handle
- Flat Eye & Eye, Type 3 Web Sling: 14' Long, 1" Wide, 1600 lb Vertical Capacity, Nylon
- Osborn - 3 Rows x 14 Columns Stainless Steel Scratch Brush - 13-3/4" OAL, 1-1/2" Trim Length, Wood Curved Handle
- Hyde Tools - 1-1/8 Inch Trim Length Stainless Steel Scratch Brush - 3-1/4" Brush Length, 8-3/4" OAL, 1-1/8" Trim Length, Plastic with Rubber Overmold Ergonomic Handle
- Brush Research Mfg. - 3 Rows x 19 Columns Bronze Scratch Brush - 5-3/4" Brush Length, 13-3/4" OAL, 1-1/8 Trim Length, Wood Curved Back Handle
- Corner Radius End Mill: 25.00 mm Dia, 40.00 mm LOC, 2.00 mm Radius, 2 Flute, Solid Carbide
- Ability One - 2 Rows x 1 Column Stainless Steel Scratch Brush - 10" OAL, 1" Trim Length, Plastic Shoe Handle
- Indexable Insert Drill: P3D2900FS32M09, 29.00 mm Max Dia, 87.00 mm Max Depth, 3xD, 32.00 mm Shank Dia
- Brush Research Mfg. - 2 Rows x 7 Columns Brass Scratch Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Wood Curved Back Handle
- Camel Grinding Wheels - 19 Columns x 3 Rows, Steel Scratch Brush - 5-1/3" Brush Length, 13-3/4" OAL, 1" Trim Length, Wood Curved Handle
- Osborn - 19 Columns x 3 Rows, Stainless Steel Scratch Brush - 6" Brush Length, 13-3/4" OAL, 1-1/4" Trim Length, Wood Curved Handle
- Ampco - 19 Rows x 6 Columns Bronze Scratch Brush - 7-1/4" OAL, 1-3/4" Trim Length, Wood Straight Handle
- Weiler - 2 Rows x 9 Columns Stainless Steel Scratch Brush - 8-3/4" OAL, 5/8" Trim Length, Wood Toothbrush Handle
- Brush Research Mfg. - 2 Rows x 7 Columns Stainless Steel Scratch Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Wood Curved Back Handle
- Weiler - 3 Rows x 19 Columns Brass Plater Brush - 5-1/2" Brush Length, 13" OAL, 1" Trim Length, Wood Curved Handle
- DeWALT - 15 Rows x 4 Columns Stainless Steel Scratch Brush - 10" OAL, 1-1/8" Trim Length, Wood Shoe Handle
- Tapered End Mill: 7 deg Angle per Side, 3/32" Small Dia, 1/2" LOC, 3 Flute, Tapered End
- Osborn - 6 Rows x 19 Columns Steel Scratch Brush - 7-1/4" Brush Length, 1-5/8" Trim Length, Wood Straight Handle
- 8" Dia, 40 Grit, Aluminum Oxide
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3708; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- Osborn - 4 Rows x 16 Columns Stainless Steel Scratch Brush - 5-1/4" Brush Length, 10" OAL, 1-1/8" Trim Length, Wood Shoe Handle
- Arc Flash Clothing Kit: Size 2X-Large, Cotton, Jacket, Pants & Hoods
- Weiler - 4 Rows x 19 Columns Nylon Plater Brush - 5-1/2 Inch Brush Length, 13 Inch Overall Length, 1 Inch Trim Length, Wood Handle
- Enclosed Letter Board: 45" Wide, 36" High, Recycled Plastics, Cedar
- Osborn - 15 Columns x 3 Rows, Steel Chip Brush - 4-11/16" Brush Length, 1-3/16" Trim Length, Wood Straight Handle
- Ability One - Hand Wire/Filament Brushes - Plastic Shoe Handle
- Reciprocating Saw Blades; Blade Material: Bi-Metal; Blade Length (Inch): 9; Blade Width (Inch): 1; Teeth Per Inch: 18; Blade Thickness (Decimal Inch): 0.0350
- Osborn - 4 Rows x 16 Columns Steel Scratch Brush - 5-1/4" Brush Length, 10" OAL, 1-1/8" Trim Length, Wood Shoe Handle
- Replacement/Interchange Hydraulic Filter Element: Microglass, 5 µ
- Brush Research Mfg. - 3 Rows x 7 Columns Nylon Scratch Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Wood Curved Back Handle
- Made in USA - 4 Rows x 16 Columns Wire Scratch Brush - 10" OAL, 1-3/16" Trim Length, Wood Shoe Handle
- Osborn - 3 Rows x 7 Columns Brass Scratch Brush - 1-7/16" Brush Length, 7-3/4" OAL, 7/16" Trim Length, Wood Curved Handle
- Corner Radius End Mill: 2.00 mm Dia, 1.00 mm LOC, 0 deg Helix, UDC Coated, Corner Radius End, Centercutting Series UDCLRSF
- Weiler - Nylon Parts Brush - 2-1/2 Trim Length
- Made in USA - 1" Trim Length Stainless Steel Scratch Stain Steel Brush - 5-1/2" Brush Length, 10" OAL, 1" Trim Length, Plastic Ergonomic Handle
- Weiler - Hand Wire/Filament Brushes - Wood Toothbrush Handle
- Arc Flash Clothing Kit: Size 2X-Large, Cotton, Jacket, Pants & Hoods
- Osborn - 4 Rows x 11 Columns Steel Scratch Brush - 5-1/2" Brush Length, 11-3/8" OAL, 1-5/8" Trim Length, Wood Straight Handle
- Hyde Tools - 20 Rows x 4 Columns Steel Scratch Brush - 6" Brush Length, 12-3/4" OAL, 1-1/8" Trim Length, Plastic with Rubber Overmold Ergonomic Handle
- Weiler - 9 Rows x 2 Columns Ceramic Scratch Brush - 2" Brush Length, 8-3/4" OAL, 5/8 Trim Length, Wood Straight Handle
- Hex Key:
- Osborn - Hand Wire/Filament Brush - Wood Curved Handle
- Weiler - 3/4" Trim Length Steel Brush - 4" Brush Length, 8-1/4" OAL, 1/4" Trim Length, Wood Straight Handle
- Brush Research Mfg. - 4 Rows x 19 Columns Stainless Steel Scratch Brush - 5-3/4" Brush Length, 14" OAL, 1 Trim Length, Wood Curved Back Handle
- Gordon Brush - 3 Rows x 7 Columns Stainless Steel Scratch Brush - 1-1/2" Brush Length, 7-3/4" OAL, 7/16 Trim Length, Wood Toothbrush Handle
- Osborn - 7 Columns x 3 Rows, Steel Scratch Brush - 1-1/2" Brush Length, 7-7/8" OAL, 1/2" Trim Length, Wood Handle
- O-Cedar - 18 Rows, Steel Wire Brush - 10" Brush Length, 14" OAL, 1-1/8" Trim Length, Wood Curved Handle
- Brush Research Mfg. - 4 Rows x 7 Columns Brass Scratch Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Wood Curved Back Handle
- Wire Cloth: 15 Wire Gauge, 0.072" Wire Dia, Stainless Steel
- Made in USA - 4 Rows x 19 Columns Wire Scratch Brush - 6-1/4" Brush Length, 13-3/4" OAL, 1-3/16" Trim Length, Wood Toothbrush Handle
- Weiler - 3 Rows x 7 Columns Nylon Scratch Brush - 7" OAL, 1/2 Trim Length, Plastic Handle
- Replacement/Interchange Hydraulic Filter Element: Microglass, 25 µ
- Ampco - 4 Rows x 19 Columns Bronze Curve-Handle Wire Brush - 13-3/4" OAL, 1-1/8" Trim Length, Wood Curved Handle
- Osborn - 3 Rows x 19 Columns Stainless Steel Scratch Brush - 6" Brush Length, 13-11/16" OAL, 1-1/8" Trim Length, Wood Curved Handle
- Osborn - 4 Rows x 18 Columns Hair Plater's Brush - 6" Brush Length, 13-1/4" OAL, 3/4" Trim Length, Wood Curved Handle
- Gordon Brush - 3 Rows x 19 Columns Steel Scratch Brush - 5-3/4" Brush Length, 13-3/4" OAL, 1/8 Trim Length, Wood Curved Handle
- Anderson - 6 Rows x 19 Columns Steel Scratch Brush - 7-1/2" OAL
- Brush Research Mfg. - 4 Rows x 16 Columns Bronze Scratch Brush - 5-3/4" Brush Length, 10-1/4" OAL, 1-1/8 Trim Length, Wood Curved Back Handle
- Rigid Top Plate Caster: Thermoplastic Rubber, 4" Wheel Dia, 1-5/8" Wheel Width, 240 lb Capacity, 4-5/8" OAH
- Extra Length Drill Bit: 0.4531", 145 °, Carbide
- Made in USA - 1" Trim Length Brass Scratch Brass Brush - 5-1/2" Brush Length, 10" OAL, 1" Trim Length, Plastic Ergonomic Handle
- Osborn - 4 Rows x 16 Columns Bronze Scratch Brush - 5-1/4" Brush Length, 10" OAL, 1-1/8" Trim Length, Wood Shoe Handle
- Osborn - 4 Rows x 18 Columns Steel Plater's Brush - 5-3/4" Brush Length, 13-1/4" OAL, 1" Trim Length, Wood Curved Handle
- Brush Research Mfg. - 4 Rows x 19 Columns Brass Scratch Brush - 5-3/4" Brush Length, 13-3/4" OAL, 1-1/8 Trim Length, Wood Curved Back Handle
- Osborn - 1 Rows x 16 Columns Steel Plater's Brush - 5" Brush Length, 10" OAL, 3/4" Trim Length, Wood Shoe Handle
- Osborn - 7 Columns x 3 Rows, Brass/Polypropylene Scratch Brush - 1-1/2" Brush Length, 7-1/4" OAL, 7/16" Trim Length, Plastic Toothbrush Handle
- Annular Cutter: 13/16" Dia, 1" Cutting Depth, High Speed Steel
- Value Collection - Nylon Parts Brush - 2-3/4 Trim Length, Plastic Handle
- Osborn - 4 Rows x 16 Columns Steel Scratch Brush - 5-1/4" Brush Length, 10" OAL, 1-1/8" Trim Length, Wood Shoe Handle
- Ability One - Hand Wire/Filament Brushes - Wood Curved Handle
- Task Chair: Vinyl, Adjustable Height, Black
- Osborn - 2 Rows x 9 Columns Polypropylene Scratch Brush - 2-1/2" Brush Length, 8-5/8" OAL, 5/8" Trim Length, Wood Curved Handle
- Steel Flared Tube 9/16-18 x M14x1.5 Thread, 37 deg Flared Angle
- MIG Flux Core Welding Wire: 0.045" Dia, Steel Alloy
- Brush Research Mfg. - 3 Rows x 19 Columns Brass Scratch Brush - 5-3/4" Brush Length, 13-3/4" OAL, 1-1/8 Trim Length, Wood Curved Back Handle
- Corner Rounding End Mills; Mill Diameter (Inch): 1/8; Mill Diameter (Decimal Inch): 0.1250; End Mill Material: Solid Carbide; Number Of Flutes: 2; Radius (Decimal Inch): 0.0390; Radius (mm): 1.00
- Shop Roll: 1" Wide, 50.00 Yd Long, 400 Grit, Aluminum Oxide
- Made in USA - 6 Rows x 19 Columns Wire Scratch Brush - 7" OAL, 1-3/4" Trim Length, Wood Straight Handle
- Made in USA - 9 Rows x 21 Columns Wire Scratch Brush - 7-1/4" OAL, 1-3/16" Trim Length, Wood Curved Handle
- Weiler - 4 Rows x 16 Columns Stainless Steel Scratch Brush - 10" Brush Length, 10" OAL, 1-3/16 Trim Length, Wood Handle
- Weiler - 6 Rows x 9 Columns Aluminum Scratch Brush - 6-3/4" OAL, 1/2" Trim Length, Wood Straight Handle
- Spiral Router Bits; Cutter Diameter (Decimal Inch): 0.1562; Cutter Diameter (Inch): 5/32; Overall Length (Inch): 3; Overall Length (Decimal Inch): 3.0000; Shank Diameter (Decimal Inch): 0.1875; Shank Diameter (Inch): 3/16
- Micro Drill Bit: 1.10 mm Dia, (0.0433"), 140 deg, Solid Carbide
- Osborn - 1 Rows x 16 Columns Stainless Steel Plater's Brush - 5" Brush Length, 10" OAL, 3/4" Trim Length, Wood Shoe Handle
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.4139; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- Deburring Wheel: 6" Dia, 1/4" Face Width, 1/4" Hole, Aluminum Oxide
- Made in USA - 4 Rows x 16 Columns Wire Scratch Brush - 10" OAL, 1-3/16" Trim Length, Wood Shoe Handle
- Value Collection - Nylon Scratch Brush
- Camel Grinding Wheels - 16 Columns x 4 Rows, Steel Scratch Brush - 4-1/2" Brush Length, 9-1/2" OAL, 1" Trim Length, Wood Shoe Handle
- Osborn - 4 Rows x 18 Columns Tampico Plater's Brush - 5-1/4" Brush Length, 10" OAL, 1" Trim Length, Wood Shoe Handle
- Corner Radius End Mill: 1/8" Dia, 1/2" LOC, 0.0100" Radius, 3 Flute, Solid Carbide
- Wire Cloth: 18 Wire Gauge, 0.047" Wire Dia, Aluminum
- Brush Research Mfg. - 4 Rows x 7 Columns Nylon Scratch Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Wood Curved Back Handle
- Scraper Replacement Blades; Product Type: Angled; Flexibility: Stiff; Blade Material: Steel; Number Of Edges: 1
- Osborn - 3 Rows x 7 Columns Polypropylene Scratch Brush - 1-7/16" Brush Length, 7-3/4" OAL, 7/16" Trim Length, Wood Curved Handle
- Weiler - 2 Rows x 17 Columns Steel Scratch Brush - 5" Brush Length, 10" OAL, 1-3/16" Trim Length, Wood Shoe Handle
- Osborn - Hand Wire/Filament Brush - Plastic Curved Handle
- Task Chair Task Chair: Olefin, 36" Seat Height, Gray
- Weiler - 3 Rows x 7 Columns Stainless Steel Scratch Brush - 7-1/8" Brush Length, 7-1/8" OAL, 1/2 Trim Length, Plastic Handle
- Made in USA - 3 Rows x 19 Columns Wire Scratch Brush - 6-1/4" Brush Length, 13-3/4" OAL, 1-1/8" Trim Length, Wood Toothbrush Handle
- Brush Research Mfg. - 2 Rows x 7 Columns Stainless Steel Scratch Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Wood Curved Back Handle
- Brand: Metro / Part #: N566MC
- Square End Mill Heads; Mill Diameter (Decimal Inch): 0.3937; Mill Diameter (mm): 10.00; Length of Cut (mm): 15.0000; Connection Type: E10; Overall Length (Decimal Inch): 1.3031
- Gordon Brush - 3 Rows x 19 Columns Steel Scratch Brush - 13-3/4" OAL, 1-1/8" Trim Length, Wood Curved Handle
- Weiler - 4 Rows x 19 Columns Stainless Steel Plater Brush - 5-1/2" Brush Length, 13" OAL, 1" Trim Length, Wood Curved Handle
- Weiler - 4 Rows x 18 Columns Tampico Plater Brush - 5-1/4" Brush Length, 13" OAL, 1" Trim Length, Wood Shoe Handle
- Collet Chuck: 0.0410 to 0.6320" Capacity, Full Grip Collet, 1.5748" Shank Dia, Taper Shank
- Weiler - 4 Rows x 15 Columns Nylon Scratch Brush - 6-1/2" OAL, 1/2" Trim Length, Plastic Toothbrush Handle
- Brush Research Mfg. - 2 Rows x 7 Columns Nylon Scratch Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Wood Curved Back Handle
- Water Cooler & Fountain: 8.0 GPH Cooling Capacity
- Made in USA - 3 Rows x 19 Columns Wire Scratch Brush - 14" OAL, 1-3/16" Trim Length, Wood Toothbrush Handle
- Weiler - 3 Rows x 15 Columns Steel Scratch Brush - 4-1/2" Brush Length, 4-5/8" OAL, 1-1/8" Trim Length, Wood Straight Handle
- Corner Chamfer End Mill: 7.00 mm Dia, 33.00 mm LOC, 3 Flute, 0.20 mm Chamfer Width, Solid Carbide
- Corner Radius End Mill: 2.00 mm Dia, 1.00 mm LOC, 0 deg Helix, UDC Coated, Corner Radius End, Centercutting Series UDCLRSF
- Weiler - 4 Rows x 16 Columns Stainless Steel Scratch Brush - 5" Brush Length, 10" OAL, 1-3/16" Trim Length, Wood Shoe Handle
- DeWALT - 19 Rows x 3 Columns Steel Scratch Brush - 13-11/16" OAL, 1-1/8" Trim Length, Wood Curved Handle
- Hyde Tools - 1-1/8 Inch Trim Length Steel Scratch Brush - 8" Brush Length, 8" OAL, 1-1/8" Trim Length, Plastic with Rubber Overmold Ergonomic Handle
- Weiler - 3 Rows x 7 Columns Brass Scratch Brush - 7-1/2" OAL, 1/2" Trim Length, Wood Toothbrush Handle
- Blackhawk by Proto - 19 Rows x 3 Columns Steel Scratch Brush - 14" OAL, 1-3/16" Trim Length, Wood Curved Handle
- JAZ USA - Stainless Steel Crimped Wire Scratch Brush - 5" Brush Length x 5" Brush Width, 10" OAL, 1-1/8" Trim Length, Plastic Handle
- Weiler - Hand Wire/Filament Brushes - Wood Curved Handle
- Value Collection - Glass Fiber Scratch Brush Tip Refill - 4-45/64" Brush Length, 4-45/64" OAL, 1-13/64" Trim Length
- Single Profile Thread Mills; Maximum Threads Per Inch: 5; Minimum Pitch (Decimal Inch): 0.2000; Minimum Threads Per Inch: 5; Maximum Pitch (Decimal Inch): 0.2000; Material: Solid Carbide; Thread Type: External
- Weiler - 2 Rows x 9 Columns Aluminum Scratch Brush - 8-3/4" OAL, 5/8" Trim Length, Wood Toothbrush Handle
- Osborn - 2-3/4" Trim Parts Cleaning Brush - 11" OAL, 2-3/4" Trim Length, Plastic Straight Handle
- Weiler - 4 Rows x 16 Columns Shoe Handle Stainless Steel Scratch Brush - 5" Brush Length, 10" OAL, 1" Trim Length, Wood Shoe Handle
- Osborn - 3 Rows x 14 Columns Steel Scratch Brush - 13-3/4" OAL, 1-1/2" Trim Length, Wood Curved Handle
- Gordon Brush - 4 Rows x 19 Columns Brass Plater Brush - 5-3/8" Brush Length, 13-3/4" OAL, 1-1/8 Trim Length, Wood Curved Handle
- Osborn - 2 Rows x 15 Columns Steel Scratch Brush - 5-1/4" Brush Length, 10" OAL, 1-1/8" Trim Length, Wood Shoe Handle
- Osborn - 4 Rows x 18 Columns Palmyra/Tampico Plater's Brush - 6" Brush Length, 13-1/4" OAL, 1" Trim Length, Wood Curved Handle
- Brush Research Mfg. - 3 Rows x 7 Columns Nylon Scratch Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Wood Curved Back Handle
- DeWALT - 15 Rows x 4 Columns Steel Scratch Brush - 10" OAL, 1-1/8" Trim Length, Wood Shoe Handle
- Enclosed Bulletin Board: 36" Wide, 48" High, Cork, Tan
- Weiler - 3 Rows x 19 Columns Stainless Steel Scratch Brush - 14" OAL, 1-1/4 Trim Length, Wood Handle
- Weiler - 3 Rows x 19 Columns Steel Plater Brush - 5-1/2" Brush Length, 13" OAL, 1" Trim Length, Wood Curved Handle
- Brush Research Mfg. - 4 Rows x 19 Columns Nylon Scratch Brush - 5-3/4" Brush Length, 13-3/4" OAL, 1 Trim Length, Wood Curved Back Handle
- Camel Grinding Wheels - 16 Columns x 4 Rows, Stainless Steel Scratch Brush - 4-3/4" Brush Length, 9-1/2" OAL, 1" Trim Length, Wood Shoe Handle
- Hex Socket Cap Screw: M8x1.25 Thread, 18.00 mm Length Under Head, 12.9 Alloy Steel, Zinc-Blue Trivalent Chromate Finish
- DeWALT - 7 Rows x 3 Columns Stainless Steel Scratch Brush - 7-3/4" OAL, 5/8" Trim Length, Wood Curved Handle
- Polybags; Style: Reclosable; Color: Clear
- Gordon Brush - 4 Rows x 19 Columns Steel Scratch Brush - 5-3/8" Brush Length, 13-3/4" OAL, 1/8 Trim Length, Wood Curved Handle
- 3" Dia, 50 Grit, Aluminum Oxide
- Brush Research Mfg. - 3 Rows x 7 Columns Brass Scratch Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Wood Curved Back Handle
- Osborn - 2 Rows x 16 Columns Palmyra/Tampico Plater's Brush - 6" Brush Length, 12" OAL, 1" Trim Length, Wood Curved Handle
- 3M - 6 Rows x 4 Columns Parts Brush - 9" OAL, 5/8" Trim Length, Plastic Pistol Handle
- Socket Extensions; Extension Type: Non-Impact; Drive Size: 3/8; Finish: Oxide; Overall Length (Inch): 7.55; Overall Length (mm): 192; Material: Steel
- Weiler - 4 Rows x 18 Columns Stainless Steel Plater Brush - 5" Brush Length, 10" OAL, 1" Trim Length, Wood Shoe Handle
- Weiler - 4 Rows x 18 Columns Curved Handle Stainless Steel Scratch Brush - 6" Brush Length, 14" OAL, 1" Trim Length, Wood Curved Handle
- Brush Research Mfg. - 2 Rows x 7 Columns Stainless Steel Scratch Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Wood Curved Back Handle
- Brush Research Mfg. - 2 Rows x 7 Columns Stainless Steel Scratch Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Wood Curved Back Handle
- Hyde Tools - 1-1/8 Inch Trim Length Stainless Steel Scratch Brush - 8" Brush Length, 8" OAL, 1-1/8" Trim Length, Plastic with Rubber Overmold Ergonomic Handle
- Hyde Tools - 1-1/8 Inch Trim Length Steel Scratch Brush - 6" Brush Length, 11-3/4" OAL, 1-1/8" Trim Length, Plastic with Rubber Overmold Ergonomic Handle
- Weiler - 3 Rows x 7 Columns Nylon Scratch Brush - 7-1/2" OAL, 1/2" Trim Length, Wood Curved Handle
- Socket Extensions; Extension Type: Non-Impact; Drive Size: 1/2; Finish: Oxide; Overall Length (Inch): 7.20; Overall Length (mm): 183; Material: Steel
- Osborn - 5 Rows x 10 Columns Steel Scratch Brush - 7-5/8" Brush Length, 7-5/8" OAL, 1" Trim Length, Wood Straight Handle
- Osborn - 6 Rows x 17 Columns Palmyra/Tampico Plater's Brush - 4-13/16" Brush Length, 11-5/8" OAL, 1" Trim Length, Wood Curved Handle
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.3596; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- Osborn - 2 Rows x 9 Columns Brass Scratch Brush - 2-1/2" Brush Length, 8-5/8" OAL, 5/8" Trim Length, Wood Curved Handle
- Brush Research Mfg. - 4 Rows x 11 Columns Brass Scratch Brush - 3" Brush Length, 3-1/4" OAL, 9/16 Trim Length, Wood Straight Back Handle
- Brush Research Mfg. - 4 Rows x 18 Columns Tampico Scratch Brush - 5-3/4" Brush Length, 13-3/4" OAL, 1 Trim Length, Wood Curved Back Handle
- Brush Research Mfg. - 4 Rows x 16 Columns Stainless Steel Scratch Brush - 4-3/4" Brush Length, 10" OAL, 1 Trim Length, Wood Shoe Handle
- Brush Research Mfg. - 2 Rows x 7 Columns Stainless Steel Scratch Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Wood Curved Back Handle
- Brush Research Mfg. - 3 Rows x 7 Columns Brass Scratch Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Wood Curved Back Handle
- Brush Research Mfg. - 4 Rows x 19 Columns Steel Scratch Brush - 5-3/4" Brush Length, 14" OAL, 1-1/8 Trim Length, Wood Curved Back Handle
- Osborn - 4 Rows x 18 Columns Brass Plater's Brush - 4-3/4" Brush Length, 10" OAL, 1" Trim Length, Wood Shoe Handle
- Made in USA - 1" Trim Length Brass Scratch Brass Brush - 5-1/2" Brush Length, 10" OAL, 1" Trim Length, Plastic Ergonomic Handle
- Gordon Brush - 4 Rows x 16 Columns Steel Plater Brush - 4-3/4" Brush Length, 10" OAL, 1-1/8 Trim Length, Wood Shoe Handle
- Steel Flared Tube 1/2-14 x 3/8-19 Thread
- Ampco - 4 Rows x 16 Columns Bronze Shoe Handle Wire Brush - 10" OAL, 1-1/8" Trim Length, Wood Shoe Handle
- Replacement/Interchange Hydraulic Filter Element: Microglass, 10 µ
- Ability One - 4 Rows x 1 Column Steel Plater's Brush - 13" OAL, 1" Trim Length, Wood Curved Handle
- Osborn - 16 Columns x 4 Rows, Brass Scratch Brush - 4-3/4" Brush Length, 10" OAL, 1-1/8" Trim Length, Wood Handle
- Decorative Metal Panels, Large, Black, 20.72" √ó 0.5" √ó 34.33"
- Power Tool Battery: 12.00V, Lithium-ion
- Weiler - 6 Rows x 19 Columns Steel Scratch Brush - 7" Brush Length, 7-1/4" OAL, 1-5/8" Trim Length, Wood Straight Handle
- Osborn - 3 Rows x 7 Columns Stainless Steel Scratch Brush - 7/16" Brush Length, 7-1/2" OAL, 7/16" Trim Length, Wood Toothbrush Handle
- Camel Grinding Wheels - 19 Columns x 3 Rows, Steel Scratch Brush - 5-1/3" Brush Length, 13-3/4" OAL, 1" Trim Length, Wood Curved Handle
- Turning Insert: DCMT21.52PM T6130, Carbide
- Brush Research Mfg. - 9 Rows x 10 Columns Brass Scratch Brush - 3" Brush Length, 8.87" OAL, 5/8 Trim Length, Wood Straight Back Handle
- Weiler - 4 Rows Steel Scratch Brush - 5" Brush Length, 11-1/2" OAL, 1-5/8 Trim Length, Wood Handle
- Corner Radius End Mill: 18.00 mm Dia, 38.00 mm LOC, 0.20 mm Radius, 6 Flute, Solid Carbide
- Weiler - 3 Rows x 15 Columns Steel Scratch Brush - 5-1/2" OAL, 1-1/2" Trim Length, Steel Loop Handle
- Weiler - 3 Rows x 7 Columns Brass Scratch Brush - 7-7/8" OAL, 1/2 Trim Length, Wood Handle
- Osborn - 2 Rows x 9 Columns Stainless Steel Scratch Brush - 2-1/2" Brush Length, 8-5/8" OAL, 5/8" Trim Length, Wood Curved Handle
- Camel Grinding Wheels - 19 Columns x 3 Rows, Stainless Steel Scratch Brush - 5-1/3" Brush Length, 13-3/4" OAL, 1" Trim Length, Wood Curved Handle
- Osborn - 3 Rows x 19 Columns Steel Scratch Brush - 6" Brush Length, 13-11/16" OAL, 1-1/8" Trim Length, Wood Curved Handle
- Camel Grinding Wheels - 16 Columns x 4 Rows, Steel Scratch Brush - 4-1/2" Brush Length, 9-1/2" OAL, 1" Trim Length, Wood Shoe Handle
- Indexable Copy End Mills; Cutting Diameter (mm): 10.00; Minimum Cutting Diameter (mm): 10.00; Maximum Cutting Diameter (mm): 20.00
- Drilling Chamfer Rings; Series: TDXC; Inside Diameter (mm): 27.8900; Overall Length (mm): 30.0000; Insert Style: XHGX-45A
- Weiler - 4 Rows x 18 Columns Steel Scratch Brush - 6" Brush Length, 14" OAL, 1-3/16" Trim Length, Wood Curved Handle
- Ampco - 3 Rows x 7 Columns Bronze Toothbrush Style Scratch Brush - 7-7/8" OAL, 1/2" Trim Length, Wood Toothbrush Handle
- Osborn - 6 Rows x 19 Columns Steel Scratch Brush - 7-1/4" Brush Length, 1-11/16" Trim Length, Wood Straight Handle
- Brush Research Mfg. - 3 Rows x 19 Columns Steel Scratch Brush - 5-3/4" Brush Length, 13-3/4" OAL, 1-1/8 Trim Length, Wood Curved Back Handle
- Osborn - Hand Wire/Filament Brush - Wood Curved Handle
- Weiler - 4 Rows x 8 Columns Steel Scratch Brush - 9-3/8" OAL, 2-1/2" Trim Length, Wood Straight Handle
- Brush Research Mfg. - 4 Rows x 7 Columns Nylon Scratch Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Wood Curved Back Handle
- Countersink Blades; Blade Type: Pointed Hook Chip Chaser; Blade Material: Steel; Hole Chamfer Type: Front; Blade Orientation: Bi-Directional; Overall Length: 5.88; Holder Compatibility: None
- Osborn - 3 Rows x 19 Columns Stainless Steel Scratch Brush - 6" Brush Length, 13-3/4" OAL, 1-1/8" Trim Length, Wood Curved Handle
- Osborn - 4 Rows x 19 Columns Steel Scratch Brush - 6" Brush Length, 13-11/16" OAL, 1-1/8" Trim Length, Wood Curved Handle
- Abrasive Belt: 1/2" Wide, 18" OAL, 60 Grit, Zirconia Alumina
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #1; Inner Diameter (Decimal Inch): 0.2692; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- Square End Mill: 0.0500" Dia, 0.2030" LOC, 3 Flute, Solid Carbide
- Weiler - 4 Rows x 11 Columns Steel Scratch Brush - 5-1/2" Brush Length, 11-1/2" OAL, 1-1/2" Trim Length, Wood Straight Handle
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #1; Inner Diameter (Decimal Inch): 0.2946; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- Class XX Master Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): +0.00002/-0.00002; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.9873; Calibrated: No; Traceability Certification Included: No; Standards: B47.1 Gage Standards,
- Brush Research Mfg. - 2 Rows x 7 Columns Brass Scratch Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Wood Curved Back Handle
- Brush Research Mfg. - 2 Rows x 7 Columns Stainless Steel Scratch Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Wood Curved Back Handle
- Weiler - 1 Rows x 17 Columns Stainless Steel Scratch Brush - 5" Brush Length, 10" OAL, 1-1/16" Trim Length, Wood Shoe Handle
- Brush Research Mfg. - 4 Rows x 7 Columns Brass Scratch Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Wood Curved Back Handle
- Micro Drill Bit: #16 (0.1770"), 130 deg, Solid Carbide
- Osborn - 1-3/4" Trim Chip Brush - 1-3/4" Trim Length, Wood Straight Handle
- DeWALT - 19 Rows x 3 Columns Stainless Steel Scratch Brush - 13-11/16" OAL, 1-1/8" Trim Length, Wood Curved Handle
- Hyde Tools - 1-1/8 Inch Trim Length Stainless Steel Scratch Brush - 6" Brush Length, 11-3/4" OAL, 1-1/8" Trim Length, Plastic with Rubber Overmold Ergonomic Handle
- Brush Research Mfg. - 4 Rows x 16 Columns Steel Scratch Brush - 4-3/4" Brush Length, 10-1/4" OAL, 1-1/8 Trim Length, Wood Shoe Handle
- Weiler - 4 Rows x 16 Columns Steel Scratch Brush - 10" Brush Length, 10" OAL, 1-3/16 Trim Length
- Weiler - 2 Rows x 9 Columns Brass Scratch Brush - 8-3/4" OAL, 5/8" Trim Length, Wood Toothbrush Handle
- Box Beam, I-Beam & Torpedo Levels; Level Type: Torpedo; Vial Style: Barrel; Length (Inch): 6; Magnetic: Yes; Accuracy: 0.002" for 0°, 90°, and 45°0.0025" for 30°; Body Material: Aluminum; Top Read: Yes
- Hyde Tools - 1-1/8 Inch Trim Length Steel Scratch Brush - 3-1/4" Brush Length, 8-3/4" OAL, 1-1/8" Trim Length, Plastic with Rubber Overmold Ergonomic Handle
- Osborn - 6 Rows, Tampico Scratch Brush - 8-3/4" Brush Length, 1-1/16" Trim Length, Wood Straight Handle
- Swivel Hoist Ring: 7000 lb Capacity
- Brush Research Mfg. - 2 Rows x 7 Columns Nylon Cleaning Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Plastic Curved Back Handle
- Weiler - 3 Rows x 19 Columns Steel Scratch Brush - 5-1/2" Brush Length, 14" OAL, 1-3/16" Trim Length, Wood Curved Handle
- Weiler - 3 Rows x 19 Columns Steel Scratch Brush - 14" Brush Length, 14" OAL, 1-3/16 Trim Length, Wood Handle
- Weiler - 3 Rows x 19 Columns Curved Handle Stainless Steel Scratch Brush - 6" Brush Length, 13-1/2" OAL, 1" Trim Length, Wood Curved Handle
- Gordon Brush - 4 Rows x 16 Columns Steel Scratch Brush - 4-3/4" Brush Length, 10" OAL, 1/8 Trim Length, Wood Shoe Handle
- Brush Research Mfg. - 2 Rows x 7 Columns Nylon Scratch Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Wood Curved Back Handle
- Weiler - 3 Rows x 7 Columns Stainless Steel Scratch Brush - 7-1/2" OAL, 1/2" Trim Length, Wood Toothbrush Handle
- Osborn - 4 Rows x 16 Columns Stainless Steel Scratch Brush - 5-1/4" Brush Length, 10" OAL, 1-1/8" Trim Length, Wood Shoe Handle
- Standard Hand Socket: 3/8" Drive, 22.00 mm Socket, 6-Point
- Weiler - 4 Rows x 18 Columns Curved Handle Steel Scratch Brush - 6" Brush Length, 14" OAL, 1" Trim Length, Wood Curved Handle
- Brush Research Mfg. - 4 Rows x 19 Columns Stainless Steel Scratch Brush - 5-3/4" Brush Length, 13-3/4" OAL, 1-1/8 Trim Length, Wood Curved Back Handle
- Weiler - 4 Rows x 18 Columns Hair Plater Brush - 5-1/4" Brush Length, 12-7/8" OAL, 1 Trim Length, Wood Handle
- Gordon Brush - 4 Rows x 19 Columns Steel Scratch Brush - 5-3/8" Brush Length, 13-3/4" OAL, 1/8 Trim Length, Wood Curved Handle
- Osborn - 4 Rows x 18 Columns Brass Plater's Brush - 5-3/4" Brush Length, 13-1/4" OAL, 1" Trim Length, Wood Curved Handle
- Osborn - 4 Rows x 18 Columns Polypropylene Plater's Brush - 6" Brush Length, 13-1/4" OAL, 7/8" Trim Length, Wood Curved Handle
- Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 1/2; Flute Type: Spiral; Number Of Flutes: 6; End Mill Material: Solid Carbide; Length of Cut (Inch): 2; Coating/Finish: AlCr
- Osborn - 7 Columns x 3 Rows, Stainless Steel Scratch Brush - 1-1/2" Brush Length, 7-7/8" OAL, 1/2" Trim Length, Wood Curved Handle
- Made in USA - 4 Rows x 11 Columns Wire Scratch Brush - 5" Brush Length, 11" OAL, 1-3/4" Trim Length, Wood Toothbrush Handle
- Brush Research Mfg. - 4 Rows x 19 Columns Steel Scratch Brush - 5-3/4" Brush Length, 13-3/4" OAL, 1-1/8 Trim Length, Wood Curved Back Handle
- Brush Research Mfg. - 2 Rows x 7 Columns Nylon Cleaning Brush - 1/2" Brush Length, 7-1/4" OAL, 1/2 Trim Length, Plastic Curved Back Handle
- Quick-Change Disc: Type S, 3" Dia, 24 Grit, Zirconia Alumina, Coated
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.3148; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- 100 Postcards
- Steel Storage Cabinet: 30" Wide, 15" Deep, 66" High
- Weiler - 3 Rows x 19 Columns Curved Handle Steel Scratch Brush - 6" Brush Length, 13-1/2" OAL, 1" Trim Length, Wood Curved Handle
- Brush Research Mfg. - 3 Rows x 19 Columns Stainless Steel Scratch Brush - 5-3/4" Brush Length, 13-3/4" OAL, 1-1/8 Trim Length, Wood Curved Back Handle
- Weiler - 4 Rows x 18 Columns Brass Plater Brush - 5" Brush Length, 10" OAL, 1" Trim Length, Wood Shoe Handle
- Weiler - 1-1/2" Long x 1/4" Diam Stainless Steel Hand Tube Brush - Single Spiral, 7" OAL, 0.005" Wire Diam, 3/32" Shank Diam
- Indexable Insert Drill: P5D2650FS32M08, 26.50 mm Max Dia, 133.00 mm Max Depth, 5xD, 32.00 mm Shank Dia
- Square End Mill: 1.4173" Dia, 2.0000" LOC, 6 Flute, Cobalt
- Schaefer Brush - 3" Long x 1" Diam Stainless Steel Long Handle Wire Tube Brush - Single Spiral, 15" OAL, 0.007" Wire Diam, 3/8" Shank Diam
- Model RX30, No. 0 Min Tap Capacity, 1/4 Inch Max Mild Steel Tap Capacity, JT6 Mount Tapping Head
- Indexable Dovetail Cutters; Included Angle: 80.00; Cutting Diameter: 2.0000 in; Maximum Depth Of Cut: 0.5300 in; Shank Type: Cylindrical; Shank Diameter: 1.0000; Compatible Insert Style: Di90L; Compatible Insert Size Code: Di90L; Through Coolant: No
- PRO-SOURCE - 4" Long x 1/2" Diam Horsehair Bristle Brush - Single Spiral, 26" OAL, 0.012" Filament Diam, 0.11" Shank Diam
- Time Cards & Time Clock Accessories; Type: Wireless Add-On Transmitter; For Use With: 2LMU3
- Mobile Work Benches; Bench Type: Heavy Duty Lab Bench; Edge Type: Straight; Depth (Inch): 30; Load Capacity (Lb.
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.2698; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- Brush Research Mfg. - 2-1/2" Long x 7/16" Diam Nylon Hole Cleaning Brush - 10" OAL, 0.01" Filament Diam, 0.168" Shank Diam
- Abrasive Belt: 37" Wide, 60" OAL, 100 Grit, Aluminum Oxide
- Screw Machine Length Drill Bit: 0.1540" Dia, 135 deg Point, HSS
- Value Collection - 1-3/8" Long x 1-1/4" Diam Steel Hand Pipe Brush - Single Spiral, 160mm OAL, 0.25" Wire Diam, 0.213" Shank Diam
- Brush Research Mfg. - 2" Long x 1/4" Diam Nylon Hole Cleaning Brush - 8" OAL, 0.008" Filament Diam, 0.112" Shank Diam
- Made in USA - 1-1/2" Long x 1/4" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.003" Wire Diam, 0.091" Shank Diam
- Made in USA - 2-1/2" Long x 7/8" Diam Brass Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.01" Wire Diam, 0.235" Shank Diam
- Square End Mill: 1-1/8" Dia, 1-1/2" LOC, 2 Flute, High Speed Steel
- Made in USA - 2" Long x 5/8" Diam Brass Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.005" Wire Diam, 0.209" Shank Diam
- Made in USA - 2-1/2" Long x 1" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.006" Wire Diam, 0.162" Shank Diam
- Made in USA - 2-1/2" Long x 3/4" Diam Brass Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.01" Wire Diam, 0.235" Shank Diam
- Made in USA - 2-1/2" Long x 3/4" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.01" Wire Diam, 0.235" Shank Diam
- Made in USA - 2" Long x 5/8" Diam Brass Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.008" Wire Diam, 0.209" Shank Diam
- Micro Drill Bit: 2.20 mm Dia, (0.0866"), 139 deg, Solid Carbide
- Schaefer Brush - 4-1/2" Long x 6" Diam Nylon Tube Brush - Single Spiral, 7" OAL, 0.045" Filament Diam, 1/4" Shank Diam
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #4; Inner Diameter (Decimal Inch): 0.9432; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- PRO-SOURCE - 4-1/2" Long x 5/8" Diam Horsehair Bristle Brush - Single Spiral, 42" OAL, 0.01" Filament Diam, 0.142" Shank Diam
- Hand Hex & Torx Bit Sockets; Socket Type: Hex Replacement Bit; Drive Size (Fractional Inch): 3/8; Torx Size: T8
- Osborn - 2" Long x 1/2" Diam Steel Tube Spiral Brush - 5" OAL, 0.006" Wire Diam, 0.187" Shank Diam
- Made in USA - 2-1/2" Long x 3/4" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.006" Wire Diam, 0.162" Shank Diam
- Swivel Top Plate Caster: Mold on Rubber, 5" Wheel Dia, 2" Wheel Width, 675 lb Capacity, 6-1/2" OAH
- Schaefer Brush - 3" Long x 1" Diam Stainless Steel Long Handle Wire Tube Brush - Single Spiral, 27" OAL, 0.007" Wire Diam, 3/8" Shank Diam
- Weiler - 2" Long x 3/8" Diam Steel Hand Tube Brush - Single Spiral, 8" OAL, 0.006" Wire Diam, 1/8" Shank Diam
- Solid Counterbores; Cutter Diameter (Decimal Inch): 0.5625; Finish/Coating: Uncoated; Shank Diameter (Inch
- Open End Wrenches; Wrench Size: 5/8in, 1/2 in; Material: Aluminum Bronze
- Schaefer Brush - 3" Long x 1/4" Diam Stainless Steel Long Handle Wire Tube Brush - Single Spiral, 15" OAL, 0.005" Wire Diam, 0.13" Shank Diam
- Value Collection - 1-1/4" Long x 7/8" Diam Steel Hand Pipe Brush - Single Spiral, 160mm OAL, 0.2" Wire Diam, 0.213" Shank Diam
- Adjustable Clamping Handle: T-Handle, 1/2-13 Thread, Fiberglass-Reinforced Nylon Handle, 0.7500" Hub Dia, Orange
- Hex Key:
- Model RX70, No. 10 Min Tap Capacity, 3/4 Inch-16 Max Mild Steel Tap Capacity, 7/8-20 Mount Tapping Head
- Corner Rounding End Mills; Mill Diameter (Inch): 1-1/4; Mill Diameter (Decimal Inch): 1.2500; End Mill Material: Carbide Tipped; Number Of Flutes: 3; Radius (Decimal Inch): 0.3750; Radius (Inch): 3/8
- Framing; Frame Type: T-Slotted; Duty Grade: Standard-Duty; Material: Aluminum Alloy; Slot Location: Sextet; Overall Length (Inch): 120; Overall Height (Inch): 2
- Arc Flash Clothing Kit: Size Small, Cotton, Bib Overalls, Hoods & Jacket
- Weiler - 2" Long x 3/8" Diam Brass Hand Tube Brush - Single Spiral, 8" OAL, 0.004" Wire Diam, 1/8" Shank Diam
- Arc Flash Clothing Kit: Size 5X-Large, Cotton, Coat, Hoods & Leggings
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.3941; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- Crane Scales & Hanging Scales; Type: Crane Scale w/2" Display; Capacity (Lb.): 30000.00; Capacity (kg): 13607.7711; Display Type: 6 Digit LCD, 5 Digit LCD; Scale Type: Crane Scale
- Corner Radius End Mill: 3/4" Dia, 2-1/4" LOC, 0.0600" Radius, 5 Flute, Solid Carbide
- Schaefer Brush - 3" Long x 1/2" Diam Stainless Steel Long Handle Wire Tube Brush - Single Spiral, 27" OAL, 0.006" Wire Diam, 0.17" Shank Diam
- 5" Dia, 400 Grit, Aluminum Oxide
- Weiler - 1" Long x 1/8" Diam Steel Hand Tube Brush - Single Spiral, 6" OAL, 0.003" Wire Diam, 3/32" Shank Diam
- Abrasive Belt: 54" Wide, 85" OAL, 80 Grit, Aluminum Oxide
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #1; Inner Diameter (Decimal Inch): 0.3141; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- Adjustable Clamping Handle: T-Handle, 1/2-13 Thread, Stainless Steel Handle, 0.7500" Hub Dia, Black
- Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 5/8; Flute Type: Spiral; Number Of Flutes: 7; End Mill Material: Solid Carbide; Length of Cut (Inch): 2-1/4; Coating/Finish: AlCr
- Osborn - 1" Long x 9/16" Diam Steel Internal Spiral Brush - Single Spiral, 3-1/2" OAL, 0.005" Wire Diam, 1/8" Shank Diam
- Schaefer Brush - 3" Long x 7/8" Diam Stainless Steel Long Handle Wire Tube Brush - Single Spiral, 27" OAL, 0.007" Wire Diam, 3/8" Shank Diam
- Weiler - 2" Long x 1/2" Diam Steel Hand Tube Brush - Single Spiral, 8" OAL, 0.004" Wire Diam, 1/8" Shank Diam
- PRO-SOURCE - 1/2" Long x 1/32" Diam Brass Twisted Wire Bristle Brush - Single Spiral, 4" OAL, 0.003" Wire Diam, 0.025" Shank Diam
- Made in USA - 2" Long x 5/8" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.008" Wire Diam, 0.142" Shank Diam
- Milling Insert: PFB120-SP XP3225, Solid Carbide
- Made in USA - 2" Long x 1/2" Diam Brass Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.006" Wire Diam, 0.162" Shank Diam
- Kennametal - 5/16" Diam Nylon Spiral Brush - Single Spiral, 5/16" Filament Diam
- Schaefer Brush - 3" Long x 1-1/4" Diam Brass Long Handle Wire Tube Brush - Single Spiral, 15" OAL, 0.008" Wire Diam, 3/8" Shank Diam
- Schaefer Brush - 3" Long x 7/8" Diam Brass Long Handle Wire Tube Brush - Single Spiral, 27" OAL, 0.006" Wire Diam, 3/8" Shank Diam
- Made in USA - 2-1/2" Long x 7/8" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.006" Wire Diam, 0.235" Shank Diam
- Weiler - 1-1/2" Long x 3/16" Diam Steel Hand Tube Brush - Single Spiral, 7" OAL, 0.003" Wire Diam, 3/32" Shank Diam
- Chisel Tool Roll: 5 Pockets, Canvas, Red
- Milling Insert: SOKU1505AZERCCM ACK20, Solid Carbide
- Made in USA - 1-1/2" Long x 1/4" Diam Brass Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.003" Wire Diam, 0.091" Shank Diam
- Adjustable Clamping Handle: T-Handle, M8x1.25 Thread, Stainless Steel Handle, 13.50 mm Hub Dia, Orange
- Combination Wrench: 9.00 mm Head Size, 15 deg Offset
- Weiler - 1-1/2" Long x 1/4" Diam Steel Hand Tube Brush - Single Spiral, 7" OAL, 0.003" Wire Diam, 3/32" Shank Diam
- Schaefer Brush - 3" Long x 1/2" Diam Brass Long Handle Wire Tube Brush - Single Spiral, 27" OAL, 0.006" Wire Diam, 0.17" Shank Diam
- Schaefer Brush - 4-1/2" Long x 8" Diam Nylon Tube Brush - Single Spiral, 7" OAL, 0.06" Filament Diam, 1/4" Shank Diam
- Corner Radius End Mill: 25.00 mm Dia, 40.00 mm LOC, 2.00 mm Radius, 2 Flute, Solid Carbide
- Brush Research Mfg. - 2-1/2" Long x 9/16" Diam Nylon Hole Cleaning Brush - 10" OAL, 0.012" Filament Diam, 0.19" Shank Diam
- Schaefer Brush - 3" Long x 3/8" Diam Stainless Steel Long Handle Wire Tube Brush - Single Spiral, 15" OAL, 0.005" Wire Diam, 0.145" Shank Diam
- Tapered End Mill: 3 deg Angle per Side, 3/32" Small Dia, 1" LOC, 1 Flute, Corner Radius End
- PRO-SOURCE - 4-1/2" Long x 1" Diam Horsehair Bristle Brush - Single Spiral, 40-1/2" OAL, 0.008" Filament Diam, 0.187" Shank Diam
- Made in USA - 1-1/2" Long x 3/8" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.003" Wire Diam, 0.085" Shank Diam
- Made in USA - 2-1/2" Long x 1" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.006" Wire Diam, 0.235" Shank Diam
- Weiler - 4" Long x 1" Diam Nylon Tube Brush - Single Spiral, 12-1/4" OAL, 0.014" Filament Diam, 5/32" Shank Diam
- Osborn - 1" Long x 41/64" Diam Steel Tube End Fitting Brush - 6-3/8" OAL, 0.008" Wire Diam
- PRO-SOURCE - 4-1/2" Long x 1-1/4" Diam Horsehair Bristle Brush - Single Spiral, 40-1/2" OAL, 0" Filament Diam, 0.187" Shank Diam
- PRO-SOURCE - 4-1/2" Long x 3/4" Diam Nylon Bristle Brush - Single Spiral, 42" OAL, 0.01" Filament Diam, 0.142" Shank Diam
- Made in USA - 2" Long x 5/8" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.005" Wire Diam, 0.142" Shank Diam
- Black Bushing: 1-1/2 x 1/2"
- Weiler - 2" Long x 3/8" Diam Steel Hand Tube Brush - Single Spiral, 8" OAL, 0.004" Wire Diam, 1/8" Shank Diam
- FR Blend, Aramid-Carbon & ePTFE
- Osborn - 1" Long x 1/4" Diam Steel Tube End Fitting Brush - 6-3/8" OAL, 0.005" Wire Diam
- Milling Insert: HOKU0806AZERHCM ACP35M, Solid Carbide
- Made in USA - 1-1/2" Long x 1/4" Diam Brass Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.003" Wire Diam, 0.091" Shank Diam
- Socket Set
- Hex Socket Cap Screw: M10x1.5 Thread, 60.00 mm Length Under Head, 12.9 Alloy Steel, Zinc-Blue Trivalent Chromate Finish
- Made in USA - 2" Long x 1/2" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.004" Wire Diam, 0.162" Shank Diam
- Brush Research Mfg. - 2-1/2" Long x 1/2" Diam Nylon Tube Brush - 10" OAL, 0.012" Filament Diam, 0.168" Shank Diam
- Brush Research Mfg. - 2" Long x 5/16" Diam Nylon Hole Cleaning Brush - 8" OAL, 0.008" Filament Diam, 1/8" Shank Diam
- Made in USA - 2-1/2" Long x 3/4" Diam Brass Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.006" Wire Diam, 0.235" Shank Diam
- Schaefer Brush - 3" Long x 1-1/4" Diam Brass Long Handle Wire Tube Brush - Single Spiral, 27" OAL, 0.008" Wire Diam, 3/8" Shank Diam
- Wet & Dry Cut Saw Blade: 14" Dia, 1 & 1" Arbor Hole
- Osborn - 1" Long x 1/2" Diam Steel Tube End Fitting Brush - 6-3/8" OAL, 0.008" Wire Diam
- Weiler - 2" Long x 1/2" Diam Stainless Steel Hand Tube Brush - Single Spiral, 8" OAL, 0.004" Wire Diam, 1/8" Shank Diam
- Kennametal - 3/4" Diam Nylon Spiral Brush - Single Spiral, 3/4" Filament Diam
- Made in USA - 2" Long x 1/2" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.004" Wire Diam, 0.11" Shank Diam
- Plastic Round Tube: 1-1/2" ID, 2" OD, 3' OAL, Black, Polyurethane
- Made in USA - 2-1/2" Long x 7/8" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.01" Wire Diam, 0.162" Shank Diam
- Made in USA - 2" Long x 1/2" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.006" Wire Diam, 0.162" Shank Diam
- Weiler - 2" Long x 3/8" Diam Stainless Steel Hand Tube Brush - Single Spiral, 8" OAL, 0.006" Wire Diam, 1/8" Shank Diam
- Steel Steel Storage Cabinet Cabinet: 30" Wide, 18" Deep, 72" High
- Office Machine Supplies & Accessories; Accessory Type: MICR Toner; Color: Black; For Use With: HP LaserJet Enterprise M610, M611, M612; Storage Capacity: None
- Red Head - 1-1/2" Long x 1-5/8" Diam Steel Wire Brush - Single Spiral, 1" Anchor Size, 5-1/4" OAL, 1-1/8" Shank Diam
- Weiler - 1" Long x 1/8" Diam Stainless Steel Hand Tube Brush - Single Spiral, 6" OAL, 0.003" Wire Diam, 3/32" Shank Diam
- Socket Handles; Tool Type: Knurled Handle, Breaker Bar, Flex Handle; Drive Size: 3/4; Overall Length (mm): 565; Overall Length (Inch): 22-1/8; Overall Length (Decimal Inch): 22.244; Material: Steel; Head Style: Fixed
- Schaefer Brush - 3" Long x 1/4" Diam Stainless Steel Long Handle Wire Tube Brush - Single Spiral, 27" OAL, 0.005" Wire Diam, 0.13" Shank Diam
- Schaefer Brush - 3" Long x 5/8" Diam Stainless Steel Long Handle Wire Tube Brush - Single Spiral, 27" OAL, 0.006" Wire Diam, 3/8" Shank Diam
- Kennametal - 5/8" Diam Nylon Spiral Brush - Single Spiral, 5/8" Filament Diam
- Sharpening Stone Accessories; Accessory Type: Sharpening Kit; For Use With: DMT Diafold Sharpeners
- Boring Bar Sleeves; Bore Diameter (Decimal Inch): 0.2760; Overall Length (Decimal Inch): 4.9210; Material: Steel
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #1; Inner Diameter (Decimal Inch): 0.3414; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- Weiler - 1-1/2" Long x 1/4" Diam Brass Hand Tube Brush - Single Spiral, 7" OAL, 0.003" Wire Diam, 3/32" Shank Diam
- PRO-SOURCE - 4-1/2" Long x 1/2" Diam Horsehair Bristle Brush - Single Spiral, 42" OAL, 0.005" Filament Diam, 0.142" Shank Diam
- Replacement/Interchange Hydraulic Filter Element: Microglass, 5 µ
- Weiler - 1-1/2" Long x 3/16" Diam Brass Hand Tube Brush - Single Spiral, 7" OAL, 0.003" Wire Diam, 3/32" Shank Diam
- Osborn - 1" Long x 57/64" Diam Steel Tube End Fitting Brush - 6-3/8" OAL, 0.008" Wire Diam
- Weiler - 2" Long x 1/2" Diam Steel Hand Tube Brush - Single Spiral, 8" OAL, 0.008" Wire Diam, 1/8" Shank Diam
- Schaefer Brush - 3" Long x 1" Diam Brass Long Handle Wire Tube Brush - Single Spiral, 15" OAL, 0.006" Wire Diam, 3/8" Shank Diam
- Made in USA - 1-1/2" Long x 3/8" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.005" Wire Diam, 1/8" Shank Diam
- Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 3/4; Flute Type: Spiral; Number Of Flutes: 6; End Mill Material: Solid Carbide; Length of Cut (Inch): 2-1/4; Coating/Finish: AlCr
- Schaefer Brush - 3" Long x 1-1/4" Diam Stainless Steel Long Handle Wire Tube Brush - Single Spiral, 27" OAL, 0.007" Wire Diam, 3/8" Shank Diam
- Tapered End Mill: 7 deg Angle per Side, 0.1860" Small Dia, 3/4" LOC, 1 Flute, Corner Radius End
- Osborn - 1" Long x 1-1/64" Diam Steel Tube End Fitting Brush - 6-3/8" OAL, 0.008" Wire Diam
- PRO-SOURCE - 4-1/2" Long x 1" Diam Nylon Bristle Brush - Single Spiral, 40-1/2" OAL, 0.014" Filament Diam, 0.187" Shank Diam
- Non-View Binder: Blue
- Drill Mills; Mill Diameter (Inch): 15/32; Mill Diameter (Decimal Inch): 0.4688; Length of Cut (Inch): 1; Number Of Flutes: 4; End Mill Material: Solid Carbide; Shank Diameter (Inch): 1/2
- Enclosed Letter Board: 18" Wide, 18" High, Fabric, Gray
- Made in USA - 2-1/2" Long x 1" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.01" Wire Diam, 0.235" Shank Diam
- Label Maker Label: White, Ink, 3-7/16" OAL, 3-7/16" OAW, 1,800 per Roll
- Task Chair: Tweed, Adjustable Height, Black
- Plastic Round Tube: 3/4" ID, 2" OD, 3' OAL, Black, Polyurethane
- Kennametal - 1/2" Diam Nylon Spiral Brush - Single Spiral, 1/2" Filament Diam
- Red Head - 1-1/2" Long x 1-1/4" Diam Steel Wire Brush - Single Spiral, 3/4" Anchor Size, 4-7/8" OAL, 7/8" Shank Diam
- Osborn - 1-1/4" Long x 1-9/64" Diam Steel Tube End Fitting Brush - 6-3/8" OAL, 0.0104" Wire Diam
- Quick-Change Disc: Type R, 3" Dia, 180 Grit, Aluminum Oxide, Coated
- Corner Radius End Mill: 3/4" Dia, 2-1/4" LOC, 0.0600" Radius, 5 Flute, Solid Carbide
- Mobile Work Benches; Bench Type: ISO 5 Clean Room Table; Edge Type: Straight; Depth (Inch): 30; Load Capacity (Lb.
- PRO-SOURCE - 1/2" Long x 1/32" Diam Stainless Steel Twisted Wire Bristle Brush - Single Spiral, 4" OAL, 0.003" Wire Diam, 0.024" Shank Diam
- Corner Radius End Mill: 1" Dia, 3" LOC, 0.2500" Radius, 5 Flute, Solid Carbide
- Made in USA - 1-1/2" Long x 3/8" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.003" Wire Diam, 1/8" Shank Diam
- Crowfoot Wrenches; Style: Open End; Drive Size: 3/8; Wrench Size (Inch): 1; Size (Inch): 1; Material: Steel
- Brush Research Mfg. - 1-1/4" Long x 1/8" Diam Nylon Hole Cleaning Brush - 8" OAL, 0.005" Filament Diam, 73" Shank Diam
- Weiler - 1-1/2" Long x 1/4" Diam Steel Hand Tube Brush - Single Spiral, 7" OAL, 0.006" Wire Diam, 3/32" Shank Diam
- Indexable Insert Drill: P3D3000FS32M09, 30.00 mm Max Dia, 90.00 mm Max Depth, 3xD, 32.00 mm Shank Dia
- PRO-SOURCE - 4-1/2" Long x 3/4" Diam Horsehair Bristle Brush - Single Spiral, 42" OAL, 0.008" Filament Diam, 0.142" Shank Diam
- Made in USA - 1-1/2" Long x 3/8" Diam Brass Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.005" Wire Diam, 1/8" Shank Diam
- Mounted Point: B52, 180 Grit, Very Fine
- Schaefer Brush - 3" Long x 7/8" Diam Brass Long Handle Wire Tube Brush - Single Spiral, 15" OAL, 0.006" Wire Diam, 3/8" Shank Diam
- Schaefer Brush - 4-1/2" Long x 1" Diam Nylon Tube Brush - Single Spiral, 7" OAL, 0.018" Filament Diam, 1/4" Shank Diam
- Made in USA - 2-1/2" Long x 7/8" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.01" Wire Diam, 0.235" Shank Diam
- Weiler - 1-1/2" Long x 1/4" Diam Steel Hand Tube Brush - Single Spiral, 7" OAL, 0.005" Wire Diam, 3/32" Shank Diam
- Steel Flared Tube 3/8-19 x 7/16-20 Thread, 37 deg Flared Angle
- Boring Bar: 5/16" Min Bore Dia, 3/4" Max Bore Depth, Right Hand, 5/16" Shank Dia, Micrograin Solid Carbide
- Value Collection - 1-1/4" Long x 1" Diam Steel Hand Pipe Brush - Single Spiral, 160mm OAL, 0.25" Wire Diam, 0.213" Shank Diam
- Office Machine Supplies & Accessories; Accessory Type: MICR Toner; Color: Black; For Use With: HP LaserJet Enterprise M611, M612; Storage Capacity: None
- Schaefer Brush - 3" Long x 1-1/2" Diam Stainless Steel Long Handle Wire Tube Brush - Single Spiral, 15" OAL, 0.007" Wire Diam, 3/8" Shank Diam
- Weiler - 2-1/2" Long x 9/16" Diam Steel Hand Tube Brush - Single Spiral, 9" OAL, 0.005" Wire Diam, 5/32" Shank Diam
- Schaefer Brush - 3" Long x 3/4" Diam Stainless Steel Long Handle Wire Tube Brush - Single Spiral, 27" OAL, 0.007" Wire Diam, 3/8" Shank Diam
- PRO-SOURCE - 4-1/2" Long x 5/8" Diam Nylon Bristle Brush - Single Spiral, 42" OAL, 0.012" Filament Diam, 0.142" Shank Diam
- Osborn - 1-3/4" Long x 2-3/16" Diam Steel Tube End Fitting Brush - 6-3/8" OAL, 0.0104" Wire Diam
- PRO-SOURCE - 4-1/2" Long x 1-1/2" Diam Nylon Bristle Brush - Single Spiral, 40-1/2" OAL, 0.01" Filament Diam, 0.205" Shank Diam
- Abrasive Belt: 37" Wide, 75" OAL, 36 Grit, Zirconia Alumina
- Replacement/Interchange Hydraulic Filter Element: Microglass, 3 µ
- Kennametal - 9/16" Diam Nylon Spiral Brush - Single Spiral, 9/16" Filament Diam
- PRO-SOURCE - 5" Long x 1-1/4" Diam Horsehair Bristle Brush - Single Spiral, 12" OAL, 0.008" Filament Diam, 0.142" Shank Diam
- Spherical Washers; Type: Female Spherical Washer; Trade Type Designation: Type D; Bolt Size (#): M24; System of Measurement: Metric; Female Inside Diameter (mm): 28.00
- Schaefer Brush - 3" Long x 1/4" Diam Brass Long Handle Wire Tube Brush - Single Spiral, 27" OAL, 0.005" Wire Diam, 0.13" Shank Diam
- Made in USA - 2" Long x 5/8" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.005" Wire Diam, 0.209" Shank Diam
- Quick-Change Disc: Type P, 2" Dia, 80 Grit, Zirconia Alumina, Coated
- Indexable Copy Face Mills; Minimum Cutting Diameter (mm): 39.80; Cutting Diameter (mm): 50.00; Maximum Cutting Diameter (mm): 50.00; Maximum Depth of Cut (mm): 5.00
- Hydraulic Hose Fittings & Couplings; Type: VEP-Series Dust Plug; Fitting Type: Dust Plug; Hose Inside Diameter (Decimal Inch): 1.0000; Hose Size: 1
- Made in USA - 2-1/2" Long x 1" Diam Brass Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.01" Wire Diam, 0.235" Shank Diam
- Square End Mill: 0.0250" Dia, 0.0380" LOC, 3 Flute, Solid Carbide
- Chemical Resistant Gloves: PredaStretch MG9648, Size Small, PVC, Supported, General Purpose Chemical-Resistant
- Air Cylinder Accessory: Glassfilled Polytetrafluoroethylene
- Made in USA - 2-1/2" Long x 3/4" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.01" Wire Diam, 0.162" Shank Diam
- PRO-SOURCE - 4-1/2" Long x 2" Diam Horsehair Bristle Brush - Single Spiral, 40-1/2" OAL, 0.005" Filament Diam, 0.187" Shank Diam
- Gas Detector Parts & Accessories; Type: Gas Detector ID Tag; Accessory Type: Gas Detector ID Tag; For Use With: ALTAIR io™ 4 Gas Detector; Material: Nylon; Mount Type: None; Detector Trade Name: ALTAIR io 4; Color: Black; Includes: (25) ID Tag Only
- Plastic Round Tube: 1" ID, 2" OD, 3' OAL, Black, Polyurethane
- Schaefer Brush - 3" Long x 3/8" Diam Stainless Steel Long Handle Wire Tube Brush - Single Spiral, 27" OAL, 0.005" Wire Diam, 0.145" Shank Diam
- Red Head - 1-1/2" Long x 1/2" Diam Steel Wire Brush - Single Spiral, 1/2" Anchor Size, 4-7/8" OAL, 5/8" Shank Diam
- Swivel Top Plate Caster: Polyurethane over Polypropylene, 4" Wheel Dia, 2" Wheel Width, 600 lb Capacity, 5-5/8" OAH
- Brush Research Mfg. - 2-1/2" Long x 3/4" Diam Nylon Tube Brush - 10" OAL, 0.017" Filament Diam, 0.22" Shank Diam
- PRO-SOURCE - 4-1/2" Long x 1-1/4" Diam Nylon Bristle Brush - Single Spiral, 42" OAL, 0.01" Filament Diam, 0.142" Shank Diam
- Paint Pen: Purple
- Weiler - 2" Long x 1/2" Diam Stainless Steel Hand Tube Brush - Single Spiral, 8" OAL, 0.006" Wire Diam, 1/8" Shank Diam
- Made in USA - 2-1/2" Long x 3/4" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.006" Wire Diam, 0.235" Shank Diam
- Air Impact Wrench: 3/4" Drive, 5,500 RPM, 1,400 ft/lb
- Made in USA - 2-1/2" Long x 1" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.01" Wire Diam, 0.162" Shank Diam
- Red Head - 1-1/2" Long x 5/8" Diam Steel Wire Brush - Single Spiral, 3/8" Anchor Size, 4-7/8" OAL, 0.438" Shank Diam
- Black Cross: 1"
- Mounted Flap Wheel: 2" Dia, 1" Face Width, 180 Grit, Aluminum Oxide
- Made in USA - 1-1/2" Long x 1/4" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.003" Wire Diam, 0.062" Shank Diam
- Weiler - 4" Long x 1-1/4" Diam Nylon Tube Brush - Single Spiral, 13" OAL, 0.014" Filament Diam, 5/32" Shank Diam
- Trash Bags:
- PRO-SOURCE - 4-1/2" Long x 1/2" Diam Nylon Bristle Brush - Single Spiral, 42" OAL, 0.01" Filament Diam, 0.142" Shank Diam
- Red Head - 1-1/2" Long x 1-3/4" Diam Steel Wire Brush - Single Spiral, 1-1/4" Anchor Size, 5-1/4" OAL, 1-3/8" Shank Diam
- Plastic Rod: Polyamide-imide, 1' Long, 1" Dia, Gray
- Osborn - 1" Long x 3/8" Diam Steel Tube End Fitting Brush - 6-3/8" OAL, 0.005" Wire Diam
- Boring Bar Sleeves; Bore Diameter (Decimal Inch): 0; Bore Depth (Decimal Inch): 0; Overall Length (mm): 70.0000; Overall Length (Decimal Inch): 2.7559; Material: Steel
- Indexable Turning Toolholder: AVJNR122.33-A, 93.000 deg Lead Angle, Clamp
- Label Maker & Tape Accessories; CARRY CASE POWERMARK ACCESSORIES
- Weiler - 2" Long x 1/2" Diam Steel Hand Tube Brush - Single Spiral, 8" OAL, 0.006" Wire Diam, 1/8" Shank Diam
- Made in USA - 2-1/2" Long x 7/8" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.006" Wire Diam, 0.162" Shank Diam
- American-Pattern File: 12" Length, Flat
- Osborn - 1-1/4" Long x 1-19/64" Diam Steel Tube End Fitting Brush - 6-3/8" OAL, 0.0104" Wire Diam
- Air Die Grinder: 1/4" Collet, 1/4 NPT Inlet
- Weiler - 1-1/2" Long x 3/16" Diam Stainless Steel Hand Tube Brush - Single Spiral, 7" OAL, 0.005" Wire Diam, 3/32" Shank Diam
- Osborn - 1" Long x 1-1/4" Diam Steel Internal Brush - Single Spiral, 3-1/2" OAL, 0.008" Wire Diam, 1/4" Shank Diam
- Made in USA - 1-1/2" Long x 3/8" Diam Brass Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.003" Wire Diam, 1/8" Shank Diam
- PRO-SOURCE - 3" Long x 13/16" Diam Steel Twisted Wire Bristle Brush - Single Spiral, 10" OAL, 0.008" Wire Diam, 0.16" Shank Diam
- Weiler - 5" Long x 2" Diam Nylon Tube Brush - Single Spiral, 16-3/4" OAL, 0.014" Filament Diam, 3/16" Shank Diam
- Made in USA - 1-1/2" Long x 1/4" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.003" Wire Diam, 0.091" Shank Diam
- Replacement/Interchange Spin-On Hydraulic Filter Element: Cellulose & Microglass, 25 µ
- Schaefer Brush - 3" Long x 3/4" Diam Brass Long Handle Wire Tube Brush - Single Spiral, 27" OAL, 0.006" Wire Diam, 3/8" Shank Diam
- Made in USA - 2-1/2" Long x 7/8" Diam Brass Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.006" Wire Diam, 0.235" Shank Diam
- Weiler - 2" Long x 1/2" Diam Brass Hand Tube Brush - Single Spiral, 8" OAL, 0.004" Wire Diam, 1/8" Shank Diam
- Weiler - 1-1/2" Long x 3/16" Diam Steel Hand Tube Brush - Single Spiral, 7" OAL, 0.005" Wire Diam, 3/32" Shank Diam
- Adjustable Wrench: 4" OAL, 1-1/8" Jaw Capacity
- Torx Bit: T15 Torx
- Magnetic Quick-Release Pin Pin: T-Handle Handle
- Schaefer Brush - 3" Long x 3/8" Diam Brass Long Handle Wire Tube Brush - Single Spiral, 27" OAL, 0.005" Wire Diam, 0.145" Shank Diam
- Weiler - 3" Long x 3/4" Diam Nylon Tube Brush - Single Spiral, 8-1/2" OAL, 0.012" Filament Diam, 1/8" Shank Diam
- Schaefer Brush - 3" Long x 1-1/2" Diam Brass Long Handle Wire Tube Brush - Single Spiral, 15" OAL, 0.008" Wire Diam, 3/8" Shank Diam
- Schaefer Brush - 3" Long x 1-1/2" Diam Brass Long Handle Wire Tube Brush - Single Spiral, 27" OAL, 0.008" Wire Diam, 3/8" Shank Diam
- Kennametal - 11/16" Diam Nylon Spiral Brush - Single Spiral, 11/16" Filament Diam
- Red Head - 1-1/2" Long x 1-1/2" Diam Steel Wire Brush - Single Spiral, 7/8" Anchor Size, 5-1/8" OAL, 1" Shank Diam
- Brush Research Mfg. - 1-1/2" Long x 3/16" Diam Nylon Spiral Brush - 8" OAL, 0.005" Filament Diam, 0.097" Shank Diam
- Spiral Flute Tap: 1/2-20, UNF, 4 Flute, Semi-Bottoming Chamfer, 3B Class of Fit, High-Speed Steel-E, Steam Oxide Finish
- Case of (12) 32 oz Spray Bottles Liquid Bathroom Cleaner
- Brush Research Mfg. - 1" Long Stainless Steel Deburring Brush - 3" OAL, 0.003" Wire Diam, 0.083" Shank Diam
- Screw Machine Length Drill Bit: 0.1570" Dia, 135 deg Point, HSS
- Weiler - 1-1/2" Long x 1/4" Diam Stainless Steel Hand Tube Brush - Single Spiral, 7" OAL, 0.003" Wire Diam, 3/32" Shank Diam
- Schaefer Brush - 3" Long x 7/8" Diam Stainless Steel Long Handle Wire Tube Brush - Single Spiral, 15" OAL, 0.007" Wire Diam, 3/8" Shank Diam
- Drill Mills; Mill Diameter (Inch): 7/32; Mill Diameter (Decimal Inch): 0.2188; Length of Cut (Inch): 3/4; Number Of Flutes: 4; End Mill Material: Solid Carbide; Shank Diameter (Inch): 1/4
- PRO-SOURCE - 4-1/2" Long x 2" Diam Nylon Bristle Brush - Single Spiral, 40-1/2" OAL, 0.014" Filament Diam, 0.187" Shank Diam
- Osborn - 1-1/2" Long x 1-21/32" Diam Steel Tube End Fitting Brush - 6-3/8" OAL, 0.0104" Wire Diam
- Red Head - 1-1/2" Long x 1" Diam Steel Wire Brush - Single Spiral, 5/8" Anchor Size, 4-7/8" OAL, 3/4" Shank Diam
- Osborn - 5" Long x 1" Diam Nylon Tube Spiral Brush - Single Spiral, 15-1/2" OAL, 0.01" Wire Diam, 3/16" Shank Diam
- Metal Shim Stock: Roll, 0.0200" Thick, 60" Long, 6" Wide, 260 Brass
- Made in USA - 2" Long x 5/8" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.008" Wire Diam, 0.209" Shank Diam
- Spiral Flute STI Taps; Thread Size (Inch): #8-32; Overall Length (Decimal Inch): 2.4638; Overall Length (mm): 62.5800; Helix Angle: 25.00; Chamfer: Semi-Bottoming
- FRL Modular Threaded Manifold Block: Aluminum, Use with Standard Regulator
- Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 5/16; Flute Type: Spiral; Number Of Flutes: 4; End Mill Material: Solid Carbide; Length of Cut (Inch): 1-1/8; Coating/Finish: AlCr
- Chamfer Mill: 1/4" Shank Dia, 90.00 deg, 3 Flute, Carbide, Corner Chamfer End
- Weiler - 4-1/2" Long x 2" Diam Steel Spiral Brush - Double Spiral, 7-1/2" OAL, 0.012" Wire Diam, 1/4" Shank Diam
- Made in USA - 2" Long x 1/2" Diam Brass Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.004" Wire Diam, 0.162" Shank Diam
- Made in USA - 1-1/2" Long x 3/8" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.005" Wire Diam, 0.085" Shank Diam
- Made in USA - 1-1/2" Long x 1/4" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.003" Wire Diam, 0.062" Shank Diam
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.2691; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- Brush Research Mfg. - 2" Long x 3/8" Diam Nylon Tube Brush - 8" OAL, 0.01" Filament Diam, 1/8" Shank Diam
- Schaefer Brush - 3" Long x 5/8" Diam Brass Long Handle Wire Tube Brush - Single Spiral, 27" OAL, 0.006" Wire Diam, 3/8" Shank Diam
- Safety Goggles: Splash & Dust, Anti-Fog & Anti-Scratch, Clear Polycarbonate Lenses
- Rockwell Superficial, Rockwell Bench Top Hardness Tester
- Engraving Cutters; Cutter Diameter (Decimal Inch): 0.4000; Cutter Diameter (mm): 10.00; Point Shape: Pointed; Shank Diameter (mm): 10.0000
- PRO-SOURCE - 4" Long x 3/8" Diam Horsehair Bristle Brush - Single Spiral, 26" OAL, 0.008" Filament Diam, 0.13" Shank Diam
- Socket Cap Screw: M5x0.8 20.00 mm Length Under Head, Alloy Steel, Zinc-Blue Trivalent Chromate
- Schaefer Brush - 3" Long x 1-1/2" Diam Stainless Steel Long Handle Wire Tube Brush - Single Spiral, 27" OAL, 0.009" Wire Diam, 3/8" Shank Diam
- Made in USA - 2-1/2" Long x 1" Diam Brass Twisted Wire Bristle Brush - Double Spiral, 18" OAL, 0.006" Wire Diam, 0.235" Shank Diam
- Plain Back Discs; Disc Diameter (Inch): 10; Abrasive Material: Silicon Carbide; Grit: 120; Grade: Fine
- Brush Research Mfg. - 3" Long x 7/8" Diam Nylon Hole Cleaning Brush - 12" OAL, 0.017" Filament Diam, 0.22" Shank Diam
- Pleated & Panel Air Filters; 24X24X12 MERV 13 DOUBLE HEADER AIR FILTER
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #1; Inner Diameter (Decimal Inch): 0.3050; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- PRO-SOURCE - 4-1/2" Long x 1-1/2" Diam Horsehair Bristle Brush - Single Spiral, 40-1/2" OAL, 0.004" Filament Diam, 0.187" Shank Diam
- Made in USA - 2" Long x 1/2" Diam Stainless Steel Twisted Wire Bristle Brush - Double Spiral, 5-1/2" OAL, 0.006" Wire Diam, 0.11" Shank Diam
- Schaefer Brush - 3" Long x 1-1/4" Diam Stainless Steel Long Handle Wire Tube Brush - Single Spiral, 15" OAL, 0.007" Wire Diam, 3/8" Shank Diam
- Jones Stephens - Drain, Waste & Vent Pipe Fittings Type: Male Trap Adapter Fitting Size: 2 (Inch)
- Schaefer Brush - 4-1/2" Long x 2" Diam Nylon Tube Brush - Single Spiral, 7" OAL, 0.022" Filament Diam, 1/4" Shank Diam
- PRO-SOURCE - 3" Long x 7/8" Diam Steel Twisted Wire Bristle Brush - Single Spiral, 10" OAL, 0.008" Wire Diam, 0.16" Shank Diam
- Weiler - 2-3/4" Diam, 3/8-24 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Eaton - 3/4 Male Thread x 1/2 Female Thread, Brass Industrial Pipe Hex Bushing
- Osborn - 6" Diam, 5/8-11 Threaded Arbor Straight Wire Silicon Carbide Cup Brush - Medium Grade, 1-1/2" Trim Length, 6,000 Max RPM
- Value Collection - 2-3/4" Diam, 5/8-11 Threaded Arbor, Brass Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 12,500 Max RPM
- Made in USA - 1-3/4" Diam, 1/4" Shank Crimped Wire Steel Cup Brush - 0.0104" Filament Diam, 3/4" Trim Length, 13,000 Max RPM
- Value Collection - 3" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.012 Wire Diam, 12,500 Max RPM
- Anderson - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1-1/4" Trim Length, 9,000 Max RPM
- DeWALT - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1-3/8" Trim Length, 6,600 Max RPM
- Osborn - 2" Diam, 1/4" Shank Diam, Stainless Steel Fill Cup Brush - 0.008 Wire Diam, 5/8" Trim Length, 10,500 Max RPM
- Value Collection - 1-3/4" Diam, 1/4" Shank Diam, Brass Fill Cup Brush - 0.008 Wire Diam, 9/16" Trim Length, 13,000 Max RPM
- Heavy-Duty Use Workbench: 84" Wide, 30 to Beige
- Weiler - 1" Diam, 1/8" Shank Straight Wire Hair Cup Brush - 0.003" Filament Diam, 7/16" Trim Length, 25,000 Max RPM
- Made in USA - 2-1/4" Diam, 1/4" Shank Crimped Wire Stainless Steel Cup Brush - 0.014" Filament Diam, 5/8" Trim Length, 13,000 Max RPM
- DeWALT - 3" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Tru-Maxx - 3-1/2" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.023 Wire Diam, 7/8" Trim Length, 13,000 Max RPM
- Weiler - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.023 Wire Diam, 1-1/4" Trim Length, 9,000 Max RPM
- Osborn - 2-3/4" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 14,000 Max RPM
- Osborn - 2-3/4" Diam, 3/8-24 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 14,000 Max RPM
- Osborn - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1-3/4" Trim Length, 6,000 Max RPM
- Value Collection - 2" Diam, 1/4" Shank Diam, Brass Fill Cup Brush - 0.012 Wire Diam, 5/8" Trim Length, 13,000 Max RPM
- Value Collection - 2-3/4" Diam, 5/8-11 Threaded Arbor, Brass Fill Cup Brush - 0.014 Wire Diam, 3/4" Trim Length, 12,500 Max RPM
- Made in USA - 2-1/4" Diam, 1/4" Shank Crimped Wire Steel Cup Brush - 0.0104" Filament Diam, 5/8" Trim Length, 13,000 Max RPM
- Osborn - 2-3/4" Diam, M10x1.25 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 14,000 Max RPM
- WALTER Surface Technologies - 3" Diam, M14x2.00 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 12,000 Max RPM
- DeWALT - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1-1/8" Trim Length, 9,000 Max RPM
- Osborn - 2-3/4" Diam, 3/8-24 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Brush Research Mfg. - 2-3/4" Diam, 1/4" Shank Diam, Nylon Fill Cup Brush - Silicon Carbide Abrasive Material, 0.022 Wire Diam, 3/4" Trim Length, 8,000 Max RPM
- Osborn - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 15/16" Trim Length, 8,500 Max RPM
- Value Collection - 2" Diam, 1/4" Shank Diam, Brass Fill Cup Brush - 0.008 Wire Diam, 5/8" Trim Length, 13,000 Max RPM
- Osborn - 4" Diam, 5/8-11 Threaded Arbor Straight Wire Aluminum Oxide Cup Brush - Fine Grade, 1-1/2" Trim Length, 6,000 Max RPM
- Brush Research Mfg. - 3" Diam, 2-3/4" Shank Diam, Carbon Steel Fill Cup Brush - 0.04 Wire Diam, 3/4" Trim Length, 8,000 Max RPM
- DeWALT - 5/8-11 Threaded Arbor, Cup Brush - 0.02 Wire Diam
- Osborn - 6" Diam, 5/8-11 Threaded Arbor Straight Wire Silicon Carbide Cup Brush - Extra Fine Grade, 1-1/2" Trim Length, 6,000 Max RPM
- Camel Grinding Wheels - 2-3/4" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 12,500 Max RPM
- Osborn - 2" Diam, 1/4" Shank Diam, Steel Fill Cup Brush - 0.014 Wire Diam, 5/8" Trim Length, 10,500 Max RPM
- Osborn - 2-3/4" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.014 Wire Diam, 14,000 Max RPM
- Brush Research Mfg. - 2-3/4" Diam, 1/4" Shank Diam, Nylon Fill Cup Brush - Silicon Carbide Abrasive Material, 0.035 Wire Diam, 3/4" Trim Length, 8,000 Max RPM
- Anderson - 2-3/4" Diam, M10x1.50 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 3/4" Trim Length, 14,000 Max RPM
- Brush Research Mfg. - 2-3/4" Diam, 1/4" Shank Diam, Nylon Fill Cup Brush - Aluminum Oxide Abrasive Material, 0.022 Wire Diam, 3/4" Trim Length, 8,000 Max RPM
- Value Collection - 2-5/8" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.0137 Wire Diam, 12,500 Max RPM
- WALTER Surface Technologies - 3" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.0118 Wire Diam, 12,000 Max RPM
- Osborn - 2" Diam, 1/4" Shank Diam, Stainless Steel Fill Cup Brush - 0.01 Wire Diam, 5/8" Trim Length, 10,500 Max RPM
- Value Collection - 6" Diam, M16x2.00 Threaded Arbor, Steel Fill Cup Brush - 0.012 Wire Diam, 4,500 Max RPM
- Osborn - 2-3/4" Diam, M10x1.25 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Osborn - 5" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 55/64" Trim Length, 6,500 Max RPM
- Anderson - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1-3/8" Trim Length, 6,600 Max RPM
- Irwin - 3/8" Diam, Spline Shank, Carbide-Tipped Rotary & Hammer Drill Bit
- DeWALT - 3" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Osborn - 2-3/4" Diam, M10x1.25 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Weiler - 2-3/4" Diam, Steel Fill Cup Brush - 0.02 Wire Diam, 3/4" Trim Length, 14,000 Max RPM
- Made in USA - 1-3/4" Diam, 1/4" Shank Crimped Wire Steel Cup Brush - 0.0118" Filament Diam, 3/4" Trim Length, 13,000 Max RPM
- Osborn - 1-3/4" Diam, 1/4" Shank Diam, Stainless Steel Fill Cup Brush - 0.006 Wire Diam, 1/2" Trim Length, 13,000 Max RPM
- Osborn - 2" Diam, 1/4" Shank Diam, Stainless Steel Fill Cup Brush - 0.008 Wire Diam, 5/8" Trim Length, 10,500 Max RPM
- Osborn - 6" Diam, 5/8-11 Threaded Arbor Straight Wire Silicon Carbide Cup Brush - Fine Grade, 0.045" Filament Diam, 2" Trim Length, 6,000 Max RPM
- Anderson - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1-1/2" Trim Length, 6,000 Max RPM
- Osborn - 9/16" Diam, 1/8" Shank Straight Wire Alumina Silicate Cup Brush - Ultra Fine Grade, 0.012" Filament Diam, 6,000 Max RPM
- Value Collection - 4-3/8" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 6,500 Max RPM
- Osborn - 2-1/2" Diam, 1/4" Shank Diam, Steel Fill Cup Brush - 0.014 Wire Diam, 5/8" Trim Length, 4,500 Max RPM
- Anderson - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.025 Wire Diam, 1-1/4" Trim Length, 9,000 Max RPM
- Osborn - 2-3/4" Diam, M10x1.25 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- JAZ USA - 3" Diam, 5/8-11 & M14x2.00 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.012 Wire Diam, 7/8" Trim Length, 13,000 Max RPM
- Anderson - 4" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.014 Wire Diam, 1-1/4" Trim Length, 9,000 Max RPM
- Brush Research Mfg. - 1-3/4" Diam, 1/4" Shank Diam, Carbon Steel Fill Cup Brush - 0.006 Wire Diam, 1/2" Trim Length, 10,000 Max RPM
- Osborn - 2-3/4" Diam, 1/2-13 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.014 Wire Diam, 14,000 Max RPM
- Weiler - 1-3/4" Diam, 1/4" Shank Diam, Steel Fill Cup Brush - 0.006 Wire Diam, 3/4" Trim Length, 13,000 Max RPM
- Value Collection - 5" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.0314 Wire Diam, 6,500 Max RPM
- Osborn - 2-3/4" Diam, 3/8-24 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 14,000 Max RPM
- Weiler - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1-3/8" Trim Length, 9,000 Max RPM
- Brush Research Mfg. - 2-3/4" Diam, 1/4" Shank Diam, Nylon Fill Cup Brush - Aluminum Oxide Abrasive Material, 0.018 Wire Diam, 3/4" Trim Length, 8,000 Max RPM
- Weiler - 3-1/2" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.023 Wire Diam, 7/8" Trim Length, 13,000 Max RPM
- Osborn - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1-3/4" Trim Length, 6,000 Max RPM
- Weiler - 2-3/4" Diam, M10x1.25 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Osborn - 2-3/4" Diam, M10x1.50 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 14,000 Max RPM
- Value Collection - 4" Diam, M16x2.00 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 8,500 Max RPM
- Value Collection - 4-3/8" Diam, M16x2.00 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 6,500 Max RPM
- PFERD - 2-3/4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- DeWALT - 3" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 13/16" Trim Length, 14,000 Max RPM
- Osborn - 2" Diam, 1/4" Shank Diam, Steel Fill Cup Brush - 0.0118 Wire Diam, 5/8" Trim Length, 10,500 Max RPM
- Weiler - 1-3/4" Diam, 1/4" Shank Diam, Stainless Steel Fill Cup Brush - 0.0118 Wire Diam, 3/4" Trim Length, 13,000 Max RPM
- Osborn - 3-1/2" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1" Trim Length, 7,500 Max RPM
- WALTER Surface Technologies - 5" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 8,600 Max RPM
- Anderson - 2-3/4" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 3/4" Trim Length, 14,000 Max RPM
- Osborn - 2-3/4" Diam, M14x2.00 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Osborn - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1-1/8" Trim Length, 9,000 Max RPM
- Osborn - 2-3/4" Diam, 3/8-24 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 14,000 Max RPM
- Dico - 2-1/2" Diam, 1/4" Shank Diam, Nylon Fill Cup Brush - Aluminum Oxide Abrasive Material, 0.04 Wire Diam
- Osborn - 2-3/4" Diam, 1/2-13 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Weiler - 2-3/4" Diam, 1/4" Shank Crimped Wire Nylon Cup Brush - Very Fine Grade, 0.035" Filament Diam, 1-1/4" Trim Length, 6,000 Max RPM
- Osborn - 3-1/2" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Osborn - 4" Diam, 5/8 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1-1/4" Trim Length, 6,000 Max RPM
- Weiler - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1-1/4" Trim Length, 9,000 Max RPM
- Weiler - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1-3/8" Trim Length, 9,000 Max RPM
- Osborn - 5" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1-1/8" Trim Length, 8,000 Max RPM
- Weiler - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1-1/2" Trim Length, 6,600 Max RPM
- Osborn - 2-1/2" Diam, 1/4" Shank Diam, Steel Fill Cup Brush - 0.014 Wire Diam, 5/8" Trim Length, 4,500 Max RPM
- Tru-Maxx - 2-3/4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1" Trim Length, 14,000 Max RPM
- Osborn - 5-3/4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1-1/2" Trim Length, 6,000 Max RPM
- Dico - 2-1/2" Diam, 1/4" Shank Diam, Nylon Fill Cup Brush - Aluminum Oxide Abrasive Material, 0.05 Wire Diam
- Osborn - 3" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 5/8" Trim Length, 12,000 Max RPM
- Anderson - 5" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1-1/4" Trim Length, 9,000 Max RPM
- Osborn - 3" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 29/32" Trim Length, 12,500 Max RPM
- Value Collection - 4-3/8" Diam, M16x2.00 Threaded Arbor, Steel Fill Cup Brush - 0.0137 Wire Diam, 6,500 Max RPM
- WALTER Surface Technologies - 3" Diam, M10x1.25 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.015 Wire Diam, 12,000 Max RPM
- Osborn - 2-3/4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Osborn - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 15/16" Trim Length, 8,500 Max RPM
- WALTER Surface Technologies - 3" Diam, M14x2.00 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.015 Wire Diam, 12,000 Max RPM
- Osborn - 2-3/4" Diam, 1/2-13 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Brush Research Mfg. - 6" Diam, 5/8-11 Threaded Arbor, Carbon Steel Fill Cup Brush - 0.014 Wire Diam, 1-3/8" Trim Length, 9,000 Max RPM
- Weiler - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1-1/4" Trim Length, 6,000 Max RPM
- Value Collection - 5" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.012 Wire Diam, 6,500 Max RPM
- Camel Grinding Wheels - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 6,600 Max RPM
- Camel Grinding Wheels - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 8,500 Max RPM
- Osborn - 3" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.014 Wire Diam, 1-3/4" Trim Length, 7,500 Max RPM
- Osborn - 4" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 1-1/4" Trim Length, 6,000 Max RPM
- Osborn - 6" Diam, 5/8 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1-3/4" Trim Length, 6,000 Max RPM
- Osborn - 3" Diam, 1/4" Shank Diam, Silicon Carbide Fill Cup Brush - Silicon Carbide Abrasive Material, 5,000 Max RPM
- Osborn - 2-3/4" Diam, 1/2-13 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Camel Grinding Wheels - 3-1/2" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 12,500 Max RPM
- Value Collection - 3" Diam, 1/4" Shank Diam, Steel Fill Cup Brush - 0.008 Wire Diam, 6,000 Max RPM
- Brush Research Mfg. - 4" Diam, 5/8-11 Threaded Arbor, Carbon Steel Fill Cup Brush - 0.0118 Wire Diam, 1-1/4" Trim Length, 9,000 Max RPM
- Osborn - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.035 Wire Diam, 1-3/4" Trim Length, 6,000 Max RPM
- Weiler - 6" Diam, 5/8-11 Threaded Arbor, Bronze Fill Cup Brush - 0.02 Wire Diam, 1-1/4" Trim Length, 6,600 Max RPM
- Osborn - 3" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 53/64" Trim Length, 11,000 Max RPM
- Osborn - 2-3/4" Diam, 3/8-24 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- DeWALT - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.023 Wire Diam, 9,000 Max RPM
- Value Collection - 5" Diam, M16x2.00 Threaded Arbor, Steel Fill Cup Brush - 0.008 Wire Diam, 6,500 Max RPM
- Brush Research Mfg. - 1-3/4" Diam, 1/4" Shank Diam, Nylon Fill Cup Brush - Silicon Carbide Abrasive Material, 0.035 Wire Diam, 1/2" Trim Length, 10,000 Max RPM
- WALTER Surface Technologies - 3" Diam, 1/2-13 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 12,000 Max RPM
- Made in USA - 2-1/4" Diam, 1/4" Shank Crimped Wire Steel Cup Brush - 0.0118" Filament Diam, 5/8" Trim Length, 13,000 Max RPM
- Osborn - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1-1/2" Trim Length, 6,000 Max RPM
- Made in USA - 1-3/4" Diam, 1/4" Shank Crimped Wire Stainless Steel Cup Brush - 0.014" Filament Diam, 3/4" Trim Length, 13,000 Max RPM
- Osborn - 5" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1-1/8" Trim Length, 8,000 Max RPM
- Value Collection - 4-3/8" Diam, M16x2.00 Threaded Arbor, Steel Fill Cup Brush - 0.0314 Wire Diam, 6,500 Max RPM
- Brush Research Mfg. - 1-3/4" Diam, 1/4" Shank Diam, Carbon Steel Fill Cup Brush - 0.0118 Wire Diam, 1/2" Trim Length, 8,000 Max RPM
- FATH - Specialty Casters Type: Caster Style: Swivel w/Brake
- Weiler - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1-5/8" Trim Length, 6,000 Max RPM
- Osborn - 1-3/4" Diam, 1/4" Shank Diam, Steel Fill Cup Brush - 0.0118 Wire Diam, 1/2" Trim Length, 13,000 Max RPM
- WALTER Surface Technologies - 3" Diam, M14x2.00 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.0118 Wire Diam, 12,000 Max RPM
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #00; Inner Diameter (Decimal Inch): 0.1053; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- WALTER Surface Technologies - 4" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.015 Wire Diam, 20,000 Max RPM
- Made in USA - 2-3/4" Diam, 1/4" Shank Crimped Wire Steel Cup Brush - 0.014" Filament Diam, 7/8" Trim Length, 13,000 Max RPM
- Anderson - 6" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 1-3/8" Trim Length, 6,600 Max RPM
- Modular Steel Storage Cabinet: 54" Wide, 27" Deep, 46" High
- Osborn - 9/16" Diam, 1/8" Shank Straight Wire Stainless Steel Cup Brush - 0.005" Filament Diam, 25,000 Max RPM
- Weiler - 3" Diam, M10x1.50 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Anderson - 2-3/4" Diam, M10x1.50 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 3/4" Trim Length, 14,000 Max RPM
- Weiler - 3-1/2" Diam, 5/8-11 Threaded Arbor Crimped Wire Nylon Cup Brush - Very Fine Grade, 0.035" Filament Diam, 1-1/2" Trim Length, 12,000 Max RPM
- Weiler - 4" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.023 Wire Diam, 1-1/4" Trim Length, 9,000 Max RPM
- Value Collection - 5" Diam, M16x2.00 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 6,500 Max RPM
- Brush Research Mfg. - 1-3/4" Diam, 1/4" Shank Diam, Nylon Fill Cup Brush - Aluminum Oxide Abrasive Material, 0.035 Wire Diam, 1/2" Trim Length, 10,000 Max RPM
- Weiler - 2-3/4" Diam, Steel Fill Cup Brush - 0.0118 Wire Diam, 7/8" Trim Length, 4,500 Max RPM
- Value Collection - 3-3/16" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.015 Wire Diam, 8,500 Max RPM
- Osborn - 2" Diam, 1/4" Shank Diam, Steel Fill Cup Brush - 0.014 Wire Diam, 5/8" Trim Length, 10,500 Max RPM
- Value Collection - 5" Diam, M16x2.00 Threaded Arbor, Steel Fill Cup Brush - 0.0137 Wire Diam, 6,500 Max RPM
- Osborn - 5" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 29/32" Trim Length, 8,000 Max RPM
- Weiler - 3-1/2" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 12,000 Max RPM
- Value Collection - 2-3/4" Diam, 1/4" Shank Diam, Brass Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 8,500 Max RPM
- Value Collection - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 8,500 Max RPM
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.2924; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- Weiler - 5/8" Diam, 1/8" Shank Crimped Wire Stainless Steel Cup Brush - 0.005" Filament Diam, 1/4" Trim Length, 37,000 Max RPM
- Brush Research Mfg. - 2-3/4" Diam, 5/8-11 Threaded Arbor, Carbon Steel Fill Cup Brush - 0.02 Wire Diam, 1" Trim Length, 6,600 Max RPM
- Camel Grinding Wheels - 4" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 6,600 Max RPM
- Weiler - 5" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.023 Wire Diam, 1-3/8" Trim Length, 7,000 Max RPM
- Value Collection - 2-3/8" Diam, M10x1.25 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 12,500 Max RPM
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4044; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- Osborn - 2-3/4" Diam, 3/8-24 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Brush Research Mfg. - 3" Diam, 5/8-11 Threaded Arbor, Carbon Steel Fill Cup Brush - 0.014 Wire Diam, 1" Trim Length, 14,000 Max RPM
- Weiler - 5" Diam, 5/8-11 Threaded Arbor, Brass Fill Cup Brush - 0.014 Wire Diam, 1-1/4" Trim Length, 8,000 Max RPM
- Brush Research Mfg. - 2-3/4" Diam, 1/4" Shank Diam, Nylon Fill Cup Brush - Aluminum Oxide Abrasive Material, 0.012 Wire Diam, 3/4" Trim Length, 8,000 Max RPM
- Made in USA - 2-1/4" Diam, 1/4" Shank Crimped Wire Steel Cup Brush - 0.008" Filament Diam, 5/8" Trim Length, 13,000 Max RPM
- Osborn - 1-3/4" Diam, 1/4" Shank Diam, Stainless Steel Fill Cup Brush - 0.006 Wire Diam, 1/2" Trim Length, 13,000 Max RPM
- Osborn - 4" Diam, 5/8-11 Threaded Arbor, Silicon Carbide Fill Cup Brush - Silicon Carbide Abrasive Material, 1-1/2" Trim Length, 6,000 Max RPM
- Osborn - 2-3/4" Diam, 3/8-24 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1" Trim Length, 14,000 Max RPM
- Camel Grinding Wheels - 4" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 8,500 Max RPM
- Osborn - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1-3/4" Trim Length, 6,000 Max RPM
- Osborn - 2-3/4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 14,000 Max RPM
- Dico - 2-1/2" Diam, 1/4" Shank Diam, Nylon Fill Cup Brush - Aluminum Oxide Abrasive Material, 0.03 Wire Diam
- Weiler - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.023 Wire Diam, 1-1/4" Trim Length, 9,000 Max RPM
- Camel Grinding Wheels - 2-3/4" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- WALTER Surface Technologies - 3" Diam, 1/2-13 Threaded Arbor, Steel Fill Cup Brush - 0.015 Wire Diam, 12,000 Max RPM
- Weiler - 6" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 1-1/4" Trim Length, 6,600 Max RPM
- WALTER Surface Technologies - 3" Diam, M14x2.00 Threaded Arbor, Steel Fill Cup Brush - 0.015 Wire Diam, 12,000 Max RPM
- Weiler - 1-3/4" Diam, Steel Fill Cup Brush - 3/4" Trim Length, 4,500 Max RPM
- Osborn - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.035 Wire Diam, 1-3/4" Trim Length, 6,000 Max RPM
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.0593; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- Osborn - 2-1/2" Diam, 1/4" Shank Diam, Stainless Steel Fill Cup Brush - 0.008 Wire Diam, 5/8" Trim Length, 4,500 Max RPM
- Osborn - 3" Diam, 1/4" Shank Crimped Wire Silicon Carbide Cup Brush - Fine Grade, 0.04" Filament Diam, 5,000 Max RPM
- Value Collection - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.015 Wire Diam, 8,500 Max RPM
- DeWALT - 6" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 1-3/8" Trim Length, 6,600 Max RPM
- Made in USA - 1-3/4" Diam, 1/4" Shank Crimped Wire Steel Cup Brush - 0.014" Filament Diam, 3/4" Trim Length, 13,000 Max RPM
- Weiler - 4" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.023 Wire Diam, 1-1/4" Trim Length, 10,200 Max RPM
- Camel Grinding Wheels - 2-3/4" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Brush Research Mfg. - 1-3/4" Diam, 1/4" Shank Diam, Carbon Steel Fill Cup Brush - 0.0118 Wire Diam, 1/2" Trim Length, 10,000 Max RPM
- JAZ USA - 4" Diam, 5/8-11 & M14x2.00 Threaded Arbor, Steel Fill Cup Brush - 0.012 Wire Diam, 1-3/16" Trim Length, 8,500 Max RPM
- Weiler - 3-1/2" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 12,000 Max RPM
- WALTER Surface Technologies - 3" Diam, M10x1.25 Threaded Arbor, Steel Fill Cup Brush - 0.015 Wire Diam, 12,000 Max RPM
- Weiler - 2-3/4" Diam, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 1" Trim Length, 12,500 Max RPM
- Value Collection - 2-5/8" Diam, M14x2.00 Threaded Arbor, Steel Fill Cup Brush - 0.012 Wire Diam, 12,500 Max RPM
- DeWALT - 3" Diam, M10x1.25 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Extra Length Drill Bit: 0.1200", 140 °, Carbide
- Milwaukee Tool - 3" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.023 Wire Diam, 7/8" Trim Length, 12,000 Max RPM
- Made in USA - 2-3/4" Diam, 1/4" Shank Crimped Wire Stainless Steel Cup Brush - 0.008" Filament Diam, 5/8" Trim Length, 13,000 Max RPM
- Anderson - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1-3/8" Trim Length, 6,600 Max RPM
- Made in USA - 1-3/4" Diam, 1/4" Shank Crimped Wire Steel Cup Brush - 0.006" Filament Diam, 3/4" Trim Length, 13,000 Max RPM
- Camel Grinding Wheels - 4" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 8,500 Max RPM
- Brush Research Mfg. - 5" Diam, 5/8-11 Threaded Arbor, Carbon Steel Fill Cup Brush - 0.014 Wire Diam, 1-1/4" Trim Length, 9,000 Max RPM
- Osborn - 6" Diam, 5/8-11 Threaded Arbor Straight Wire Silicon Carbide Cup Brush - Fine Grade, 1-1/2" Trim Length, 6,000 Max RPM
- Camel Grinding Wheels - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 6,500 Max RPM
- Camel Grinding Wheels - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 8,500 Max RPM
- Camel Grinding Wheels - 2-3/4" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 7/8" Trim Length, 12,500 Max RPM
- Made in USA - 1-3/4" Diam, 1/4" Shank Crimped Wire Stainless Steel Cup Brush - 0.008" Filament Diam, 3/4" Trim Length, 13,000 Max RPM
- Weiler - 2-3/4" Diam, 3/8-24 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 1" Trim Length, 14,000 Max RPM
- Value Collection - 3-3/16" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 8,500 Max RPM
- Weiler - 3" Diam, 3/8-24 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Weiler - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1-1/4" Trim Length, 6,600 Max RPM
- Osborn - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1-1/2" Trim Length, 9,000 Max RPM
- Value Collection - 3" Diam, M10x1.25 Threaded Arbor, Steel Fill Cup Brush - 0.008 Wire Diam, 12,500 Max RPM
- Value Collection - 4" Diam, Stainless Steel Fill Cup Brush - 0.023 Wire Diam, 1-1/4" Trim Length, 9,000 Max RPM
- Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #7; Inner Diameter (Decimal Inch): 2.1110; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
- Weiler - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1-3/8" Trim Length, 9,000 Max RPM
- WALTER Surface Technologies - 3" Diam, M14x2.00 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 12,000 Max RPM
- Brush Research Mfg. - 2-3/4" Diam, 1/4" Shank Diam, Nylon Fill Cup Brush - Aluminum Oxide Abrasive Material, 0.04 Wire Diam, 3/4" Trim Length, 8,000 Max RPM
- Osborn - 2-1/2" Diam, 1/4" Shank Diam, Stainless Steel Fill Cup Brush - 0.008 Wire Diam, 5/8" Trim Length, 4,500 Max RPM
- Osborn - 3-1/2" Diam, 5/8-11 Threaded Arbor, Brass Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 12,500 Max RPM
- Osborn - 4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1" Trim Length, 6,000 Max RPM
- Value Collection - 4" Diam, 5/8-11 Threaded Arbor, Brass Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 8,500 Max RPM
- Osborn - 2-3/4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1" Trim Length, 14,000 Max RPM
- Osborn - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1-3/4" Trim Length, 6,000 Max RPM
- Value Collection - 1200" Long x 8' Wide Top Sheet
- WALTER Surface Technologies - 2-3/8" Diam, 1/4" Shank Diam, Stainless Steel Fill Cup Brush - 0.0118 Wire Diam, 13,000 Max RPM
- Camel Grinding Wheels - 2-3/4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Weiler - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1-3/8" Trim Length, 6,600 Max RPM
- WALTER Surface Technologies - 2-3/8" Diam, 1/4" Shank Diam, Steel Fill Cup Brush - 0.0118 Wire Diam, 13,000 Max RPM
- Osborn - 3-1/2" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1-3/8" Trim Length, 7,500 Max RPM
- Osborn - 2" Diam, 1/4" Shank Diam, Stainless Steel Fill Cup Brush - 0.0104 Wire Diam, 5/8" Trim Length, 10,500 Max RPM
- Weiler - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 1-1/4" Trim Length, 6,600 Max RPM
- Weiler - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.023 Wire Diam, 1-3/8" Trim Length, 6,600 Max RPM
- Osborn - 3" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 3/4" Trim Length, 7,500 Max RPM
- Impact Drivers; Voltage: 18.00; Handle Type: Pistol Grip; Speed (RPM): 3600; Number Of Speeds: Variable Speed; Torque (In/Lb): 1700.00; Torque (Ft/Lb): 141.67; Impacts per Minute: 4900
- Value Collection - 3-3/16" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.0314 Wire Diam, 8,500 Max RPM
- Osborn - 5-3/4" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.025 Wire Diam, 1-5/8" Trim Length, 6,000 Max RPM
- Value Collection - 2-3/8" Diam, M10x1.50 Threaded Arbor, Steel Fill Cup Brush - 0.0137 Wire Diam, 12,500 Max RPM
- Osborn - 3-1/2" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1-3/8" Trim Length, 7,500 Max RPM
- Brush Research Mfg. - 1-3/4" Diam, 1/4" Shank Diam, Nylon Fill Cup Brush - Aluminum Oxide Abrasive Material, 0.04 Wire Diam, 1/2" Trim Length, 10,000 Max RPM
- Weiler - 2-3/4" Diam, M10x1.50 Threaded Arbor, Steel Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Osborn - 4" Diam, 5/8-11 Threaded Arbor Straight Wire Silicon Carbide Cup Brush - Fine Grade, 1-1/2" Trim Length, 6,000 Max RPM
- Value Collection - 5" Diam, M16x2.00 Threaded Arbor, Steel Fill Cup Brush - 0.0314 Wire Diam, 6,500 Max RPM
- Osborn - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 1-1/2" Trim Length, 7,000 Max RPM
- Weiler - 4" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.014 Wire Diam, 1-1/4" Trim Length, 9,000 Max RPM
- Osborn - 3-1/2" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.006 Wire Diam, 1" Trim Length, 7,500 Max RPM
- Tru-Maxx - 2-3/4" Diam, 1/4" Shank Diam, Steel Fill Cup Brush - 0.0118 Wire Diam, 7/8" Trim Length, 6,000 Max RPM
- Camel Grinding Wheels - 2-3/4" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.014 Wire Diam, 7/8" Trim Length, 14,000 Max RPM
- Weiler - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.035 Wire Diam, 1-3/8" Trim Length, 6,600 Max RPM
- Brush Research Mfg. - 6" Diam, 5/8-11 Threaded Arbor, Carbon Steel Fill Cup Brush - 0.02 Wire Diam, 1-3/8" Trim Length, 6,600 Max RPM
- Brush Research Mfg. - 6" Diam, 5/8-11 Threaded Arbor, Carbon Steel Fill Cup Brush - 0.025 Wire Diam, 1-3/8" Trim Length, 6,600 Max RPM
- Made in USA - 1-3/4" Diam, 1/4" Shank Crimped Wire Stainless Steel Cup Brush - 0.0104" Filament Diam, 3/4" Trim Length, 13,000 Max RPM
- Made in USA - 2-1/4" Diam, 1/4" Shank Crimped Wire Stainless Steel Cup Brush - 0.0104" Filament Diam, 5/8" Trim Length, 13,000 Max RPM
- Weiler - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.035 Wire Diam, 1-5/8" Trim Length, 6,000 Max RPM
- Weiler - 1-3/4" Diam, Steel Fill Cup Brush - 0.0118 Wire Diam, 3/4" Trim Length, 4,500 Max RPM
- Weiler - 5" Diam, 5/8-11 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.02 Wire Diam, 1-1/4" Trim Length, 8,000 Max RPM
- Osborn - 4" Diam, 5/8-11 Threaded Arbor Straight Wire Silicon Carbide Cup Brush - Extra Fine Grade, 1-1/2" Trim Length, 6,000 Max RPM
- Weiler - 6" Diam, 5/8-11 Threaded Arbor Crimped Wire Nylon Cup Brush - Medium Grade, 0.04" Filament Diam, 1-1/4" Trim Length, 6,600 Max RPM
- Osborn - 4" Diam, 5/8-11 Threaded Arbor Straight Wire Nylon Cup Brush - Medium Grade, 1-1/2" Trim Length, 6,000 Max RPM
- Osborn - 2-3/4" Diam, M10x1.25 Threaded Arbor, Stainless Steel Fill Cup Brush - 0.014 Wire Diam, 14,000 Max RPM
- Weiler - 2-3/4" Diam, 1/4" Shank Diam, Steel Fill Cup Brush - 0.0118 Wire Diam, 7/8" Trim Length, 6,000 Max RPM
- Camel Grinding Wheels - 6" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.035 Wire Diam, 7/8" Trim Length, 6,600 Max RPM
- Dremel - 1/2" Diam, 1/8" Shank Diam, Steel Fill Cup Brush - 15,000 Max RPM
- WALTER Surface Technologies - 3" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.0118 Wire Diam, 12,000 Max RPM
- WALTER Surface Technologies - 5" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 8,600 Max RPM
- Flare Nut Wrenches; Wrench Type: Open End; Head Type: Straight; Double/Single End: Double; Opening Type: 6-Point Flare Nut; Material: Steel; Finish: Satin, Chrome
- Value Collection - 3" Diam, 5/8-11 Threaded Arbor, Steel Fill Cup Brush - 0.02 Wire Diam, 11,000 Max RPM
- Value Collection - 3" Diam, M10x1.25 Threaded Arbor, Steel Fill Cup Brush - 0.0137 Wire Diam, 11,000 Max RPM
- JAZ USA - 3" Diam, 5/8-11 & M14x2.00 Threaded Arbor, Steel Fill Cup Brush - 0.012 Wire Diam, 7/8" Trim Length, 13,000 Max RPM