Workholding - Tooling & Acc. - Magnetic Chucks & Controls - Magnetic Chucks - (121 Products)
Electromagnetic Chuck with Transverse Poles - #EMCB618T; 6'' x 18''
Item #: NJ50EMCB618T
Manufacturer: Suburban
Mfg #: EMCB618T
Technical Specifications:
*Brand Name: Suburban
*Height: 3-1/2
*Pole: Transverse
*Size: 6 x 18
*Watts: 130
*Weight: 117 lbs
Description:
*Electromagnetic Chucks
*Transverse Pole Chucks - Poles Run Side to Side
*Longitudinal Pole Chucks - Poles Run End to End
*Top plate has 1/8" steel poles and 1/16" stainless steel separators
*Chucks are sealed against dirt and liquids
*Longitudinal (lengthwise) or transverse (crosswise) pole models available
*Two clamps, back rail and side rail included
*Chuck controls must be used with all electromagnetic chucks!
Shipping Info:
*Commercial Truck - Call for Shipping Charges
*Actual Weight - 117.0000
*Dimensions - Height: 13.0 Length: 23.0 Width: 13.0
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
6 x 18" NEO Micro2 Chuck
Item #: HM55NM618
Manufacturer: O.S. Walker
Mfg #: B11.815.45
Technical Specifications:
*Brand Name: O.S. Walker
*Height: 2
*Size: 6 x 18
*Weight: 62 lbs
Description:
*NEOMicro2 Chucks
*Super accurate
*Loaded with Rare Earth Neodymium magnet material
*Micro fine top plate with .02" brass gaps and .05" steel poles
*Maxiumum workholding surface 100% active with no weak areas
*Ideal for very thin and small components
*Low profile
*One back rest and one end stop
Shipping Info:
*Actual Weight - 62.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
16.9" x 16.5" x 2.8" - Electro Permanent Magnetic Chuck
Item #: TE10EEPM4040W48
Manufacturer: Techniks
Mfg #: EEPM-4040W
Technical Specifications:
*Brand Name: Techniks
*Hazard Code: 77.5
*Height: 2.8
*Holding Power: 24,750 lbs
*Pole: 36
*Pole Spacing: 0.4
*Shape: Rectangular
*Size: 16.9" x 16.5" x 2.8"
Description:
*Select a chuck larger than your part for maximum holding power
*Subplates are sized to match the chuck but are 1" thick
*Control is included and requires dedicated 480V, single phase, 30A power
*Use induction blocks or subplates at all times to prevent damage to the face of the chuck and preserve the finish
Shipping Info:
*Commercial Truck - Call for Shipping Charges
*Actual Weight - 205.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HAZ05 MC812S2 SUBURBAN MAG CHUCK
Item #: NJ50MC812S2
Manufacturer: Suburban
Mfg #: MC-812-S2
Technical Specifications:
*Brand Name: Suburban
*Hazard Code: HAZ05
Description:
Shipping Info:
*HAZ 5C
*UPS Ground - No Additional Shipping Charges
*UPS Air - Cannot Ship Air
*Commercial Truck - Call for Shipping Charges
*Note: The additional charges are controlled by UPS and are subject to change.
*Actual Weight - 58.0000
*Dimensions - Height: 7.00 Length: 15.0 Width: 11.0
*Additional handling - $15.00 per item
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Standard Pole Circular Magnetic Chuck - #MMC0638; 9" Dia - HAZ05
Item #: HM45TRMC9
Manufacturer: Quality Import
Mfg #: AMC0638
Technical Specifications:
*Brand Name: Quality Import
*Hazard Code: HAZ05
*Height: 2-7/8
*Pole: Standard
*Shape: Round
*Size: 9
*Weight: 46 lbs
Description:
*Standard Pole Permanent Round Magnetic Chucks
*Powerful ceramic magnets
*Solid top and bottom plates
*Uniform holding power
*Easy on-off handle
Shipping Info:
*HAZ 05
*UPS Ground - No Additional Shipping Charges
*UPS Air - Cannot Ship Air
*Commercial Truck - Call for Shipping Charges
*Note: The additional charges are controlled by UPS and are subject to change.
*Actual Weight - 35.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Fine Pole Magnetic Chuck - 4" x 7"
Item #: HM50MCB47FP
Manufacturer: Suburban
Mfg #: MCB-47-FP
Technical Specifications:
*Brand Name: Suburban
*Height: 2-5/8
*Pole: Fine
*Pole Spacing: 1/8
*Shape: Rectangular
*Size: 4 x 7
*Weight: 19 lbs
Description:
*Rectangular Magnetic Chuck
*Ceramic magnets provide superior holding power that never fades
*Sealed against dirt and liquids, and can also be used in EDM machines
*Front mounted handle is removable to eliminate interference
*Handle, back rail, side rail and two clamps included
*Overall height is 2-5/8"
Shipping Info:
*HAZ 5C
*UPS Ground - No Additional Shipping Charges
*UPS Air - Cannot Ship Air
*Commercial Truck - Call for Shipping Charges
*Note: The additional charges are controlled by UPS and are subject to change.
*Actual Weight - 19.0000
*Dimensions - Height: 7.00 Length: 9.00 Width: 9.00
*Additional handling - $15.00 per item
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5" Round Rare Earth Magnetic Chuck Fine Pole
Item #: HM50MRRE13FP
Manufacturer: Suburban
Mfg #: MRRE-13-FP
Technical Specifications:
*Bolt Center Distance: 4.53
*Bolt Size: (3) M6
*Brand Name: Suburban
*Height: 1.69
*Pole: Fine
*Pole Spacing: .02
*Shape: Round
*Size: 5
*Weight: 14 lbs
Description:
*Round Rare Earth Magnetics Chuck
*Features:
*Made with neodymium iron boron tupe rare earth magnets for exceptonal holding power
*80 N/cm2 (116 psi) nominal holding power
*Fine Pole:
*Suitable for grinding & EDM
*Works bes for holding smaller & thinner workpieces
*Has 1.5mm steel poles & 0.5mm brass spacers
Shipping Info:
*Actual Weight - 14.0000
*Dimensions - Height: 5.00 Length: 9.00 Width: 9.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Electromagnetic Chuck with Longitudinal Poles - #EMCB612L; 6'' x 12''
Item #: NJ50EMCB612L
Manufacturer: Suburban
Mfg #: EMCB612L
Technical Specifications:
*Brand Name: Suburban
*Height: 3-1/4
*Pole: Longitudinal
*Size: 6 x 12
*Watts: 56
*Weight: 75 lbs
Description:
*Electromagnetic Chucks
*Transverse Pole Chucks - Poles Run Side to Side
*Longitudinal Pole Chucks - Poles Run End to End
*Top plate has 1/8" steel poles and 1/16" stainless steel separators
*Chucks are sealed against dirt and liquids
*Longitudinal (lengthwise) or transverse (crosswise) pole models available
*Two clamps, back rail and side rail included
*Chuck controls must be used with all electromagnetic chucks!
Shipping Info:
*Actual Weight - 75.0000
*Dimensions - Height: 9.00 Length: 17.0 Width: 11.0
*Addl Fee Over 70lb - $19.00 per item
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Magnum-Force Permanent Magnetic Chuck - 8" x 18"
Item #: HM50DMB818
Manufacturer: Suburban
Mfg #: DMB-818
Technical Specifications:
*Brand Name: Suburban
*Height: 2-1/2
*Pole: Standard
*Pole Spacing: 1/8 & 1/4
*Shape: Rectangular
*Size: 8 x 18
*Weight: 87 lbs
Description:
*Magnum-Force™ Permanent Magnetic Chuck
*Dual magnets provide 120% more power
*Submersible for use in EDM and fluids
*Clamps included
*1/16" Stainless dividers with1/8" minor pole and 1/4" major pole
Shipping Info:
*Commercial Truck - Call for Shipping Charges
*Actual Weight - 87.0000
*Dimensions - Height: 9.00 Length: 31.0 Width: 17.0
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
#45135 - 1" Thick Blank Pallet for VM300 Vacmagic®
Item #: SG7045135
Manufacturer: Mitee-Bite
Mfg #: 45135
Technical Specifications:
*Brand Name: Mitee-Bite
Description:
*VacMagic® VM300
*Capabilities include traditional vacuum applicaitons and the ability to perform as a rock solid pallet changer
Shipping Info:
*Actual Weight - .9900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
6 x 18" Rectangular Rare Earth Magnetic Chuck Fine Pole
Item #: HM50MRE1545FP
Manufacturer: Suburban
Mfg #: MRE-1545-F
Technical Specifications:
*Brand Name: Suburban
*Height: 1.97
*Pole: Fine
*Pole Spacing: .02
*Shape: Rectangular
*Size: 6 x 18
*Weight: 60 lbs
Description:
*Rectangular Rare Earth Magnetic Chuck
*Made with neodymium iron boron tupe rare earth magnets for exceptional holding power
*Flat, square & parallel within 0.005mm/100mm
*Chucks are lubricated & sealed against dirt & liquids
*80 N/cm2 (116 psi) nominal holding power
*Includes removeable handle, side and back rails
*Fine Pole:
*Suitable for grinding & EDM
*Works best for holding smaller & thinner workpieces
*Has 1.5mm steel poles & 0.5mm brass spacers
Shipping Info:
*Actual Weight - 60.0000
*Dimensions - Height: 9.00 Length: 23.0 Width: 11.0
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Standard Pole Circular Magnetic Chuck - 9-1/4" Dia
Item #: HM50RMC9
Manufacturer: Suburban
Mfg #: RMC-9
Technical Specifications:
*Brand Name: Suburban
*Height: 3
*Pole: Standard
*Pole Spacing: 3/16
*Shape: Round
*Size: 9-1/4
*Weight: 36 lbs
Description:
*Circular Type Magnetic Chuck
*Ceramic magnets provide three times the holding power of ordinary magnets
*Individually magnetized poles assure uniform pull
*No dead spots
*Full power over entire top surface
*Solid top and bottom plates retain accuracy
*Ideal height for work clearance
Shipping Info:
*HAZ 5C
*UPS Ground - No Additional Shipping Charges
*UPS Air - Cannot Ship Air
*Commercial Truck - Call for Shipping Charges
*Note: The additional charges are controlled by UPS and are subject to change.
*Actual Weight - 37.0000
*Dimensions - Height: 7.00 Length: 13.0 Width: 13.0
*Additional handling - $15.00 per item
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Electromagnetic Chuck with Longitudinal Poles - #EMCB618L; 6'' x 18''
Item #: NJ50EMCB618L
Manufacturer: Suburban
Mfg #: EMCB618L
Technical Specifications:
*Brand Name: Suburban
*Height: 3-1/4
*Pole: Longitudinal
*Size: 6 x 18
*Watts: 110
*Weight: 117 lbs
Description:
*Electromagnetic Chucks
*Transverse Pole Chucks - Poles Run Side to Side
*Longitudinal Pole Chucks - Poles Run End to End
*Top plate has 1/8" steel poles and 1/16" stainless steel separators
*Chucks are sealed against dirt and liquids
*Longitudinal (lengthwise) or transverse (crosswise) pole models available
*Two clamps, back rail and side rail included
*Chuck controls must be used with all electromagnetic chucks!
Shipping Info:
*Commercial Truck - Call for Shipping Charges
*Actual Weight - 117.0000
*Dimensions - Height: 13.0 Length: 23.0 Width: 13.0
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
12 x 24" NEO Micro2 Chuck
Item #: HM55NM1224
Manufacturer: O.S. Walker
Mfg #: B11.830.60
Technical Specifications:
*Brand Name: O.S. Walker
*Height: 2.2
*Size: 12 x 24
*Weight: 179 lbs
Description:
*NEOMicro2 Chucks
*Super accurate
*Loaded with Rare Earth Neodymium magnet material
*Micro fine top plate with .02" brass gaps and .05" steel poles
*Maxiumum workholding surface 100% active with no weak areas
*Ideal for very thin and small components
*Low profile
*One back rest and one end stop
Shipping Info:
*Commercial Truck - Call for Shipping Charges
*Actual Weight - 179.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Electromagnetic Chuck with Longitudinal Poles - #EMCB818L; 8'' x 18''
Item #: NJ50EMCB818L
Manufacturer: Suburban
Mfg #: EMCB818L
Technical Specifications:
*Brand Name: Suburban
*Height: 3-1/4
*Pole: Longitudinal
*Size: 8 x 18
*Watts: 100
*Weight: 160 lbs
Description:
*Electromagnetic Chucks
*Transverse Pole Chucks - Poles Run Side to Side
*Longitudinal Pole Chucks - Poles Run End to End
*Top plate has 1/8" steel poles and 1/16" stainless steel separators
*Chucks are sealed against dirt and liquids
*Longitudinal (lengthwise) or transverse (crosswise) pole models available
*Two clamps, back rail and side rail included
*Chuck controls must be used with all electromagnetic chucks!
Shipping Info:
*Commercial Truck - Call for Shipping Charges
*Actual Weight - 160.0000
*Dimensions - Height: 12.0 Length: 30.0 Width: 16.0
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HAZ05 MAG CHUCK SUBURBAN
Item #: NJ50MC612S2
Manufacturer: Suburban
Mfg #: MC-612-S2
Technical Specifications:
*Brand Name: Suburban
*Hazard Code: HAZ05
Description:
Shipping Info:
*HAZ 5C
*UPS Ground - No Additional Shipping Charges
*UPS Air - Cannot Ship Air
*Commercial Truck - Call for Shipping Charges
*Note: The additional charges are controlled by UPS and are subject to change.
*Actual Weight - 42.0000
*Dimensions - Height: 5.00 Length: 15.0 Width: 9.00
*Additional handling - $15.00 per item
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Electromagnetic Chuck - #EW0824; 8" x 24"
Item #: HM55EW0824
Manufacturer: O.S. Walker
Mfg #: 68-AMX8004
Technical Specifications:
*Brand Name: O.S. Walker
*Height: 2-7/8
*Pole Spacing: 1/8
*Size: 8 x 24
*Watts: 150
*Weight: 130 lbs
Description:
*Fine pole longitudinal bar poles with .03" brass gaps and .12" steel poles
*Silver brazed solid top plate
*Watertight for grinders, EDM, and milling applications
*Extremely low profile
*Includes backrest, side rails, and two cast clamps
*Twist lock plug for easy assembly to a Walker Smart B or SCV chuck control
*115 VDC
Shipping Info:
*Actual Weight - 130.0000
*Addl Fee Over 70lb - $19.00 per item
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Magnum-Force Permanent Magnetic Chuck - 8" x 24"
Item #: HM50DMB824
Manufacturer: Suburban
Mfg #: DMB-824
Technical Specifications:
*Brand Name: Suburban
*Hazard Code: HAZ05
*Height: 2-1/2
*Pole: Standard
*Pole Spacing: 1/8 & 1/4
*Shape: Rectangular
*Size: 8 x 24
*Weight: 116 lbs
Description:
*Magnum-Force™ Permanent Magnetic Chuck
*Dual magnets provide 120% more power
*Submersible for use in EDM and fluids
*Clamps included
*1/16" Stainless dividers with1/8" minor pole and 1/4" major pole
Shipping Info:
*Actual Weight - 116.0000
*Dimensions - Height: 9.00 Length: 31.0 Width: 17.0
*Addl Fee Over 70lb - $19.00 per item
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Fine Pole Circular Magnetic Chuck - 10" Dia
Item #: HM50RMC10FP
Manufacturer: Suburban
Mfg #: RMC-10-FP
Technical Specifications:
*Brand Name: Suburban
*Height: 3
*Pole: Fine
*Pole Spacing: 3/16
*Shape: Round
*Size: 10
*Weight: 43 lbs
Description:
*Circular Type Magnetic Chuck
*Ceramic magnets provide three times the holding power of ordinary magnets
*Individually magnetized poles assure uniform pull
*No dead spots
*Full power over entire top surface
*Solid top and bottom plates retain accuracy
*Ideal height for work clearance
Shipping Info:
*HAZ 5C
*UPS Ground - No Additional Shipping Charges
*UPS Air - Cannot Ship Air
*Commercial Truck - Call for Shipping Charges
*Note: The additional charges are controlled by UPS and are subject to change.
*Actual Weight - 43.0000
*Dimensions - Height: 7.00 Length: 13.0 Width: 13.0
*Additional handling - $15.00 per item
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Magnum-Force Permanent Magnetic Chuck - 6" x 12"
Item #: HM50DMB612
Manufacturer: Suburban
Mfg #: DMB-612
Technical Specifications:
*Brand Name: Suburban
*Height: 2-1/2
*Pole: Standard
*Pole Spacing: 1/8 & 1/4
*Shape: Rectangular
*Size: 6 x 12
*Weight: 44 lbs
Description:
*Magnum-Force™ Permanent Magnetic Chuck
*Dual magnets provide 120% more power
*Submersible for use in EDM and fluids
*Clamps included
*1/16" Stainless dividers with1/8" minor pole and 1/4" major pole
Shipping Info:
*HAZ 5C
*UPS Ground - No Additional Shipping Charges
*UPS Air - Cannot Ship Air
*Commercial Truck - Call for Shipping Charges
*Note: The additional charges are controlled by UPS and are subject to change.
*Actual Weight - 47.0000
*Dimensions - Height: 9.00 Length: 17.0 Width: 11.0
*Additional handling - $15.00 per item
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It