Safety > Anti-Static & ESD Equipment (ET04) - (1608 Products)
Safety > Anti-Static & ESD Equipment (ET04)
Chucking Reamer: Letter F, 6" OAL, 1-1/2" Flute Length, Straight-Cylindrical Shank, HSS
Item #: 07949316
Brand: Titan USA
Model #: TR97106
Product Specifications
| Reamer Diameter (Letter) | F |
| Reamer Diameter Range (Decimal Inch) | 0.2500 - 0.2999 |
| Reamer Diameter (Decimal Inch) | 0.2570 |
| Tool Material | HSS |
| Flute Type | Spiral |
| Spiral Direction | Left Hand |
| Coating/Finish | Bright/Uncoated |
| Shank Type | Straight-Cylindrical |
| Coolant Through | No |
| Dowel Pin Reamer | No |
| Over/Under Size Reamer | No |
| Overall Length (Decimal Inch) | 6.0000 |
| Overall Length (Inch) | 6 |
| Number of Flutes | 6 |
| Shank Diameter (Decimal Inch) | 0.2485 |
| Flute Length (Inch) | 1-1/2 |
| Reamer Diameter Tolerance | +0.0002 to -0.0000 in |
| Series | TR97 |
| Cutting Direction | Right Hand |
| Additional Information | Left Hand Spiral; Reaming; High Speed Steel; Reamers; Chucking |
| UNSPSC Code | 23241611 |
$30.05
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Grooving Tool: Interior, Left Hand
Item #: 11717337
Brand: Internal Tool
Model #: 27-1310
Product Specifications
| Grooving Tool Type | Grooving |
| Cutting Direction | Left Hand |
| Minimum Hole Diameter (Decimal Inch) | 0.2500 |
| Groove Width (Decimal Inch) | 0.1460 |
| Shank Diameter (Inch) | 1/4 |
| Overall Length (Decimal Inch) | 2.5000 |
| Full Radius | Yes |
| Maximum Hole Depth (Decimal Inch) | 0.6250 |
| Projection (Decimal Inch) | 0.6250 |
| Material | Solid Carbide |
| Interior/Exterior | Interior |
| Undercut | No |
| Material Grade | Micrograin |
| Maximum Hole Depth (Inch) | 5/8 |
| Shank Length (Decimal Inch) | 1.8750 |
| Overall Length (Inch) | 2-1/2 |
| Tool Bit Adjusting Screw | No |
| Manufacturer's Part Number | 27-1310 |
| UNSPSC Code | 23241600 |
$33.25
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Screw Machine Length Drill Bit: 0.2638" Dia, 140 deg Point, Solid Carbide
Item #: 12243879
Brand: Walter-Titex
Model #: 7378154
Product Specifications
| Drill Bit Size (mm) | 6.70 |
| Drill Bit Size (Decimal Inch) | 0.2638 |
| Tool Material | Solid Carbide |
| Cutting Direction | Right Hand |
| Coating/Finish | Multi-layer |
| Number Of Flutes | 2 |
| Spiral Type | Regular |
| Flute Type | Regular Spiral |
| Drill Point Angle | 140 |
| Coolant Through | Yes |
| Primary Workpiece Material | Aluminum & Non-Ferrous; High-Temp Alloy; Cast Iron; Steel |
| Point Type | Standard |
| Shank Type | Straight |
| Shank Diameter (Decimal Inch) | 0.3150 |
| Overall Length (Decimal Inch) | 3.1100 |
| Series | DC160-03-A1 |
| Proprietary Coating/Finish | TiSiAlCrN/AlTiN |
| Drill Length Type | Screw Machine |
| Maximum Drilling Depth (Decimal Inch) | 0.9450 |
| Shank Length (Decimal Inch) | 1.4170 |
| Drill Point Length (Decimal Inch) | 0.0480 |
| Flute By Diameter Ratio | 3xD |
| Tool Performance | Universal Advance |
| Drill Bit Diameter Tolerance | m7 |
| Standards | ISO; DIN |
| Flute Length (Decimal Inch) | 1.3390 |
| Drill Bit Size Range (Decimal Inch) | 0.2500 to 0.3000 |
| Material Grade | WJ30ET |
| UNSPSC Code | 23241635 |
$128.84
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ball End Mill: 6.00 mm Dia, 39.00 mm LOC, 6 Flute, Solid Carbide
Item #: 67220897
Brand: Kennametal
Model #: 7078277
Product Specifications
| Mill Diameter (Decimal Inch) | 0.2362 |
| Mill Diameter (mm) | 6.00 |
| Length of Cut (mm) | 39.00 |
| End Mill Material | Solid Carbide |
| Flute Type | Spiral |
| Overall Length (mm) | 100.00 |
| Centercutting | Yes |
| Shank Diameter (mm) | 12.00 |
| Helix Angle | 38 |
| Primary Workpiece Material | Hard Material; Stainless Steel; Superalloys & Titanium; Steel |
| Primary Workpiece Material Code | P; S; H; M |
| Flute Direction | Right Hand |
| Series | HARVI III Taper Ball Nose |
| Coating Classification | PVD |
| Coolant Through | No |
| Coating/Finish | AlTiN |
| Number Of Flutes | 6 |
| UNSPSC Code | 27112803 |
| Mill Diameter (Decimal Inch) | 0.2362 |
| Mill Diameter (mm) | 6.00 |
| Length of Cut (mm) | 39.00 |
| End Mill Material | Solid Carbide |
| Flute Type | Spiral |
| Overall Length (mm) | 100.00 |
| Centercutting | Yes |
| Shank Diameter (mm) | 12.00 |
| Helix Angle | 38 |
| Primary Workpiece Material | Hard Material; Stainless Steel; Superalloys & Titanium; Steel |
| Primary Workpiece Material Code | P; S; H; M |
| Flute Direction | Right Hand |
| Series | HARVI III Taper Ball Nose |
| Coating Classification | PVD |
| Coolant Through | No |
| Coating/Finish | AlTiN |
| Number Of Flutes | 6 |
| UNSPSC Code | 27112803 |
| MSC Part # | 67220897 |
| Mfr Part # | 7078277 |
| Country of Origin Country of Origin is subject to change | Israel |
$149.56
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ball End Mill: 8.00 mm Dia, 33.00 mm LOC, 6 Flute, Solid Carbide
Item #: 67220749
Brand: Kennametal
Model #: 7078280
Product Specifications
| Mill Diameter (Decimal Inch) | 0.3150 |
| Mill Diameter (mm) | 8.00 |
| Length of Cut (mm) | 33.00 |
| End Mill Material | Solid Carbide |
| Flute Type | Spiral |
| Overall Length (mm) | 110.00 |
| Centercutting | Yes |
| Shank Diameter (mm) | 16.00 |
| Helix Angle | 38 |
| Primary Workpiece Material | Hard Material; Stainless Steel; Superalloys & Titanium; Steel |
| Primary Workpiece Material Code | P; S; H; M |
| Flute Direction | Right Hand |
| Series | HARVI III Taper Ball Nose |
| Coating Classification | PVD |
| Coolant Through | No |
| Coating/Finish | AlTiN |
| Number Of Flutes | 6 |
| UNSPSC Code | 27112803 |
| Mill Diameter (Decimal Inch) | 0.3150 |
| Mill Diameter (mm) | 8.00 |
| Length of Cut (mm) | 33.00 |
| End Mill Material | Solid Carbide |
| Flute Type | Spiral |
| Overall Length (mm) | 110.00 |
| Centercutting | Yes |
| Shank Diameter (mm) | 16.00 |
| Helix Angle | 38 |
| Primary Workpiece Material | Hard Material; Stainless Steel; Superalloys & Titanium; Steel |
| Primary Workpiece Material Code | P; S; H; M |
| Flute Direction | Right Hand |
| Series | HARVI III Taper Ball Nose |
| Coating Classification | PVD |
| Coolant Through | No |
| Coating/Finish | AlTiN |
| Number Of Flutes | 6 |
| UNSPSC Code | 27112803 |
| MSC Part # | 67220749 |
| Mfr Part # | 7078280 |
| Country of Origin Country of Origin is subject to change | Israel |
$292.04
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Micro Drill Bit: 2.75 mm Dia, (0.1083"), 180 deg, Solid Carbide
Item #: 67543413
Brand: Mitsubishi
Model #: 10592533
Product Specifications
| Drill Bit Size (mm) | 2.75 |
| Drill Bit Size (Decimal Inch) | 0.1083 |
| Tool Material | Solid Carbide |
| Flute Length (Decimal Inch) | 0.4331 |
| Flute Length (mm) | 11.00 |
| Coating/Finish | TiAlN |
| Coolant Through | No |
| Drill Point Angle | 180 |
| Cutting Direction | Right Hand |
| Maximum Drilling Depth (mm) | 5.50 |
| Maximum Drilling Depth (Decimal Inch) | 0.2165 |
| Number Of Flutes | 2 |
| Series | MFE |
| Overall Length (Decimal Inch) | 1.9685 |
| Overall Length (mm) | 50.00 |
| Flute Type | Spiral |
| Shank Type | Straight-Cylindrical |
| Point Type | X-Thinning |
| Tool Application | Very Small Hole Drilling; Blind Hole |
| Web Thinning | X-Thinned |
| Primary Workpiece Material | Steel |
| Primary Workpiece Material Code | P |
| Secondary Workpiece Material | Stainless Steel; Aluminum; Cast Iron; Brass; Carbon Steel; Superalloys & Titanium; Aluminum Alloy; Steel; Copper; Hardened Steel |
| Secondary Workpiece Material Code | P; K; M; N |
| Standards | ISO |
| Shank Diameter (Decimal Inch) | 0.1575 |
| Shank Diameter (mm) | 4.00 |
| Shank Length (Decimal Inch) | 1.4252 |
| Shank Length (mm) | 36.20 |
| Flute By Diameter Ratio | 2xD |
| UNSPSC Code | 23241600 |
| Drill Bit Size (mm) | 2.75 |
| Drill Bit Size (Decimal Inch) | 0.1083 |
| Tool Material | Solid Carbide |
| Flute Length (Decimal Inch) | 0.4331 |
| Flute Length (mm) | 11.00 |
| Coating/Finish | TiAlN |
| Coolant Through | No |
| Drill Point Angle | 180 |
| Cutting Direction | Right Hand |
| Maximum Drilling Depth (mm) | 5.50 |
| Maximum Drilling Depth (Decimal Inch) | 0.2165 |
| Number Of Flutes | 2 |
| Series | MFE |
| Overall Length (Decimal Inch) | 1.9685 |
| Overall Length (mm) | 50.00 |
| Flute Type | Spiral |
| Shank Type | Straight-Cylindrical |
| Point Type | X-Thinning |
| Tool Application | Very Small Hole Drilling; Blind Hole |
| Web Thinning | X-Thinned |
| Primary Workpiece Material | Steel |
| Primary Workpiece Material Code | P |
| Secondary Workpiece Material | Stainless Steel; Aluminum; Cast Iron; Brass; Carbon Steel; Superalloys & Titanium; Aluminum Alloy; Steel; Copper; Hardened Steel |
| Secondary Workpiece Material Code | P; K; M; N |
| Standards | ISO |
| Shank Diameter (Decimal Inch) | 0.1575 |
| Shank Diameter (mm) | 4.00 |
| Shank Length (Decimal Inch) | 1.4252 |
| Shank Length (mm) | 36.20 |
| Flute By Diameter Ratio | 2xD |
| UNSPSC Code | 23241600 |
| MSC Part # | 67543413 |
| Mfr Part # | 10592533 |
| Country of Origin Country of Origin is subject to change | Japan |
$96.78
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Work Gloves: Coldwork Coldwork™ Insulated FastFit Plus, Size 2X-Large, Tricot Lined, Fleece, SoftShell & Primaloft, Cold Work, Cold Condition & General Purpose
Item #: 67542910
Brand: Mechanix Wear
Model #: CWKFF-55-012
Product Specifications
| Glove Type | Cold Work; Cold Condition; General Purpose |
| Application | Cold Storage; Equipment Operation; Home Improvement; Snow Removal; Maintenance & Repair |
| Lining Material | Tricot |
| Back Material | SoftShell; Thinsulate |
| Cuff Material | SoftShell |
| Cuff Style | Elastic |
| Primary Material | SoftShell; Fleece; Primaloft |
| Grip Surface | Smooth |
| Men's Size | 2X-Large |
| Women's Size | 3X-Large |
| Color | Covert |
| Overall Length (Inch) | 12 |
| High Visibility | No |
| FDA Approved | No |
| Static Dissipative | No |
| Lint-Free | No |
| Hand | Pair |
| ANSI/ISEA Abrasion Resistance Level | Not Tested |
| Finger Coverage | Full Fingered |
| Series | Coldwork™ Insulated FastFit Plus |
| Protection Type | Cold; General |
| UNSPSC Code | 46181504 |
| Palm Features | Insulated Synthetic Palm |
| Gender | Men's |
| Glove Type | Cold Work; Cold Condition; General Purpose |
| Application | Cold Storage; Equipment Operation; Home Improvement; Snow Removal; Maintenance & Repair |
| Lining Material | Tricot |
| Back Material | SoftShell; Thinsulate |
| Cuff Material | SoftShell |
| Cuff Style | Elastic |
| Primary Material | SoftShell; Fleece; Primaloft |
| Grip Surface | Smooth |
| Men's Size | 2X-Large |
| Women's Size | 3X-Large |
| Color | Covert |
| Overall Length (Inch) | 12 |
| High Visibility | No |
| FDA Approved | No |
| Static Dissipative | No |
| Lint-Free | No |
| Hand | Pair |
| ANSI/ISEA Abrasion Resistance Level | Not Tested |
| Finger Coverage | Full Fingered |
| Series | Coldwork™ Insulated FastFit Plus |
| Protection Type | Cold; General |
| UNSPSC Code | 46181504 |
| Palm Features | Insulated Synthetic Palm |
| Gender | Men's |
| MSC Part # | 67542910 |
| Mfr Part # | CWKFF-55-012 |
| Country of Origin Country of Origin is subject to change | Philippines |
$54.58
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Flammable & Hazardous Storage Cabinets: 120.000 gal Drum, 2.000 Door, 2 Shelf, Self Closing, Safety Yellow
Item #: 67830349
Brand: Durham
Model #: 1120S-50
Product Specifications
| Door Type | Self Closing |
| Mount Type | Benchtop |
| Hazardous Chemical Type | Non-Combustible |
| Cabinet Style | Standard; Double Wall |
| Adjustable Shelves | Yes |
| Shelf Depth (Fractional Inch) | 29-1/8 |
| Standards | FM; OSHA; NFPA 30 |
| FM Approved | Yes |
| Color | Safety Yellow |
| Height (Inch) | 66-3/8 |
| Width (Inch) | 59 |
| Depth (Inch) | 34 |
| Material | Steel |
| Capacity (Gal.) | 120.000 |
| Number Of Doors | 2.000 |
| Additional Information | Shelf Width: 55-5/8 in; Handle Type: Recessed, Pad Lockable with Keyed Lock; Finish: Powder Coated/Gloss |
| Number Of Shelves | 2 |
| UNSPSC Code | 24112400 |
| Door Type | Self Closing |
| Mount Type | Benchtop |
| Hazardous Chemical Type | Non-Combustible |
| Cabinet Style | Standard; Double Wall |
| Adjustable Shelves | Yes |
| Shelf Depth (Fractional Inch) | 29-1/8 |
| Standards | FM; OSHA; NFPA 30 |
| FM Approved | Yes |
| Color | Safety Yellow |
| Height (Inch) | 66-3/8 |
| Width (Inch) | 59 |
| Depth (Inch) | 34 |
| Material | Steel |
| Capacity (Gal.) | 120.000 |
| Number Of Doors | 2.000 |
| Additional Information | Shelf Width: 55-5/8 in; Handle Type: Recessed, Pad Lockable with Keyed Lock; Finish: Powder Coated/Gloss |
| Number Of Shelves | 2 |
| UNSPSC Code | 24112400 |
| MSC Part # | 67830349 |
| Mfr Part # | 1120S-50 |
| Country of Origin Country of Origin is subject to change | Mexico |
$3,045.42
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Mobile Work Centers; Center Type: Mobile Bench Cabinet; Load Capacity: 2000; Depth (Inch): 54-1/8; Height (Inch): 37-3/4; Number Of Bins: 0; Color: Gray; Overall Depth: 54.125 in; Overall Height: 37.75 in
Item #: 67830331
Brand: Durham
Model #: 3411-TH-FL-95
Product Specifications
| Center Type | Mobile Bench Cabinet |
| Load Capacity | 2000 |
| Depth (Inch) | 54-1/8 |
| Height (Inch) | 37-3/4 |
| Number Of Bins | 0 |
| Color | Gray |
| Overall Depth | 54.125 in |
| Overall Height | 37.75 in |
| Overall Width | 24 |
| Gauge | 14 |
| Body Material | Steel |
| Top Material | Hardboard |
| Wheel Material | Polyurethane |
| Wheel Configuration | (2) Rigid & (2) Swivel |
| Finish | Powder Coated; Textured |
| Wheel Diameter | 5 |
| Work Surface Height | 0.25 in |
| Caster Size | 5 x 1-1/4 |
| UNSPSC Code | 56111500 |
| Number Of Drawers | 0.000 |
| Shipping Weight | 218.0000 |
| Number Of Doors | 2.000 |
| Number Of Trays | 0 |
| Center Type | Mobile Bench Cabinet |
| Load Capacity | 2000 |
| Depth (Inch) | 54-1/8 |
| Height (Inch) | 37-3/4 |
| Number Of Bins | 0 |
| Color | Gray |
| Overall Depth | 54.125 in |
| Overall Height | 37.75 in |
| Overall Width | 24 |
| Gauge | 14 |
| Body Material | Steel |
| Top Material | Hardboard |
| Wheel Material | Polyurethane |
| Wheel Configuration | (2) Rigid & (2) Swivel |
| Finish | Powder Coated; Textured |
| Wheel Diameter | 5 |
| Work Surface Height | 0.25 in |
| Caster Size | 5 x 1-1/4 |
| UNSPSC Code | 56111500 |
| Number Of Drawers | 0.000 |
| Shipping Weight | 218.0000 |
| Number Of Doors | 2.000 |
| Number Of Trays | 0 |
| MSC Part # | 67830331 |
| Mfr Part # | 3411-TH-FL-95 |
| Country of Origin Country of Origin is subject to change | Mexico |
$2,138.46
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #1; Inner Diameter (Decimal Inch): 0.2587; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
Item #: 67829499
Brand: GSG
Model #: GSG-CR-0.2587C
Product Specifications
| Material | Solid Carbide |
| Tolerance (Decimal Inch) | 0.00000/-0.00002 |
| Blank Number Wire Size | #1 |
| Inner Diameter (Decimal Inch) | 0.2587 |
| Calibrated | Yes |
| Traceability Certification Included | NIST |
| Go/No Go | Go |
| Standards | B47.1 Gage Standards; ASME B89.1.6 |
| UNSPSC Code | 41111619 |
| Material | Solid Carbide |
| Tolerance (Decimal Inch) | 0.00000/-0.00002 |
| Blank Number Wire Size | #1 |
| Inner Diameter (Decimal Inch) | 0.2587 |
| Calibrated | Yes |
| Traceability Certification Included | NIST |
| Go/No Go | Go |
| Standards | B47.1 Gage Standards; ASME B89.1.6 |
| UNSPSC Code | 41111619 |
| MSC Part # | 67829499 |
| Mfr Part # | GSG-CR-0.2587C |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$652.62
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Indexable Chamfer & Angle Face Mills; Minimum Cutting Diameter (mm): 250.00; Minimum Cutting Diameter (Decimal Inch): 9.8425; Maximum Cutting Diameter (mm): 263.00; Maximum Cutting Diameter (Decimal Inch): 10.3543; Maximum Depth of Cut (mm): 6.00; Maximum
Item #: 68885052
Brand: Kyocera
Model #: THN08814
Product Specifications
| Minimum Cutting Diameter (mm) | 250.00 |
| Minimum Cutting Diameter (Decimal Inch) | 9.8425 |
| Maximum Cutting Diameter (mm) | 263.00 |
| Maximum Cutting Diameter (Decimal Inch) | 10.3543 |
| Maximum Depth of Cut (mm) | 6.00 |
| Maximum Depth of Cut (Decimal Inch) | 0.2362 |
| Arbor Hole Diameter (Decimal Inch) | 1.8752 |
| Lead Angle | 45.000 |
| Compatible Insert Size Code | 1406 |
| Cutter Style | MB45 |
| Cutting Direction | Right Hand |
| Insert Holding Method | Screw |
| Rake | Negative (Axial); Negative (Radial) |
| Series | MB45 |
| Hub Diameter (mm) | 47.630 |
| Hub Diameter (Decimal Inch) | 1.8752 |
| Keyway Width (Decimal Inch) | 25.4000 |
| Maximum RPM | 5100.000 |
| Tool Application | Chamfering; Facing |
| Tool Performance | High Performance |
| Standards | GR99 |
| Counterbore Diameter (Decimal Inch) | 4.3307 |
| Complete Insert Compatibility | SNEU1406?; SNMU1406? |
| Toolholder Material | Steel |
| Manufacturers Catalog Number | MB45250R14T10 |
| Number Of Cutter Inserts | 10 |
| Coolant Through | No |
| UNSPSC Code | 23242106 |
| Minimum Cutting Diameter (mm) | 250.00 |
| Minimum Cutting Diameter (Decimal Inch) | 9.8425 |
| Maximum Cutting Diameter (mm) | 263.00 |
| Maximum Cutting Diameter (Decimal Inch) | 10.3543 |
| Maximum Depth of Cut (mm) | 6.00 |
| Maximum Depth of Cut (Decimal Inch) | 0.2362 |
| Arbor Hole Diameter (Decimal Inch) | 1.8752 |
| Lead Angle | 45.000 |
| Compatible Insert Size Code | 1406 |
| Cutter Style | MB45 |
| Cutting Direction | Right Hand |
| Insert Holding Method | Screw |
| Rake | Negative (Axial); Negative (Radial) |
| Series | MB45 |
| Hub Diameter (mm) | 47.630 |
| Hub Diameter (Decimal Inch) | 1.8752 |
| Keyway Width (Decimal Inch) | 25.4000 |
| Maximum RPM | 5100.000 |
| Tool Application | Chamfering; Facing |
| Tool Performance | High Performance |
| Standards | GR99 |
| Counterbore Diameter (Decimal Inch) | 4.3307 |
| Complete Insert Compatibility | SNEU1406?; SNMU1406? |
| Toolholder Material | Steel |
| Manufacturers Catalog Number | MB45250R14T10 |
| Number Of Cutter Inserts | 10 |
| Coolant Through | No |
| UNSPSC Code | 23242106 |
| MSC Part # | 68885052 |
| Mfr Part # | THN08814 |
| Country of Origin Country of Origin is subject to change | Japan |
$1,767.23
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Vibration Isolators; Isolator Type: Plate/Stud; Insert Material: Zinc-Plated Steel; Isolator Material: Natural Rubber; Maximum Load Capacity: 3300.00 N; Top Diameter: 50.00; Bottom Diameter: 50; Thread Size: M10x1.5; Overall Width: 50 mm
Item #: 69300101
Brand: J.W. Winco
Model #: 351-50-30-M10-ES-55
Product Specifications
| Isolator Type | Plate/Stud |
| Insert Material | Zinc-Plated Steel |
| Isolator Material | Natural Rubber |
| Maximum Load Capacity | 3300.00 N |
| Top Diameter | 50.00 |
| Bottom Diameter | 50 |
| Thread Size | M10x1.5 |
| Overall Width | 50 mm |
| Overall Diameter | 50 mm |
| Thread Length (Decimal Inch) | 1.1000 |
| Deflection | 0.3000 |
| Hardness Rating | Shore 55A |
| Mount Type | Stud; Plate |
| Shape | Round |
| Thread Depth | 10.0000 |
| Thread Pitch | 1.5 mm |
| Thread Standard | Metric |
| Height (Decimal Inch) | 58 mm |
| UNSPSC Code | 23153130 |
| Isolator Type | Plate/Stud |
| Insert Material | Zinc-Plated Steel |
| Isolator Material | Natural Rubber |
| Maximum Load Capacity | 3300.00 N |
| Top Diameter | 50.00 |
| Bottom Diameter | 50 |
| Thread Size | M10x1.5 |
| Overall Width | 50 mm |
| Overall Diameter | 50 mm |
| Thread Length (Decimal Inch) | 1.1000 |
| Deflection | 0.3000 |
| Hardness Rating | Shore 55A |
| Mount Type | Stud; Plate |
| Shape | Round |
| Thread Depth | 10.0000 |
| Thread Pitch | 1.5 mm |
| Thread Standard | Metric |
| Height (Decimal Inch) | 58 mm |
| UNSPSC Code | 23153130 |
| MSC Part # | 69300101 |
| Mfr Part # | 351-50-30-M10-ES-55 |
| Country of Origin Country of Origin is subject to change | Hungary |
$9.59
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Electronic & Sensor Faucets; Faucet Style: External Temperature Control Mixer; Spout Type: Gooseneck; Mounting Centers: Single Hole; Voltage (Ac
Item #: 72047335
Brand: Zurn
Model #: ZG6920-MV-SH
Product Specifications
| Faucet Style | External Temperature Control Mixer |
| Spout Type | Gooseneck |
| Mounting Centers | Single Hole |
| Voltage (Ac - 0 Decimals) | 115 |
| Finish | Polished Chrome |
| Battery Included | Yes |
| Type Of Power | Hydro Power; Battery Back-Up |
| Faucet Type | Sensor Gooseneck |
| Battery Size | AA |
| Number Of Batteries | 6 |
| Special Item Information | EZ Gear Technology; HydroX Power |
| Includes | Faucet Body with Mounting Hardware; Spout Assembly; 6 Alkaline Batteries; Electronic Box; Aerator and Key; Mixing Valve; 3 Piece Supply Hose; Hydrogenerator |
| Material | Chrome-Plated |
| Maximum Flow Rate | 1.5 GPM |
| UNSPSC Code | 40141700 |
| Faucet Style | External Temperature Control Mixer |
| Spout Type | Gooseneck |
| Mounting Centers | Single Hole |
| Voltage (Ac - 0 Decimals) | 115 |
| Finish | Polished Chrome |
| Battery Included | Yes |
| Type Of Power | Hydro Power; Battery Back-Up |
| Faucet Type | Sensor Gooseneck |
| Battery Size | AA |
| Number Of Batteries | 6 |
| Special Item Information | EZ Gear Technology; HydroX Power |
| Includes | Faucet Body with Mounting Hardware; Spout Assembly; 6 Alkaline Batteries; Electronic Box; Aerator and Key; Mixing Valve; 3 Piece Supply Hose; Hydrogenerator |
| Material | Chrome-Plated |
| Maximum Flow Rate | 1.5 GPM |
| UNSPSC Code | 40141700 |
| MSC Part # | 72047335 |
| Mfr Part # | ZG6920-MV-SH |
| Country of Origin Country of Origin is subject to change | Indonesia |
$1,381.38
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Replaceable Drill Tips: .484X.276X.202, 0.4843" Dia, 12.30 mm Dia, 140 deg Point, IN2505
Item #: 72150089
Brand: Ingersoll Cutting Tools
Model #: 5120023
Product Specifications
| Cutting Diameter (Inch) | 31/64 |
| Cutting Diameter (Decimal Inch) | 0.4843 |
| Cutting Diameter (mm) | 12.30 |
| Tip Material | Solid Carbide |
| Manufacturer Grade | IN2505 |
| Material Grade | P15; P30 |
| Series | TPA |
| Coating Process | PVD |
| Insert Seat Size | 12 |
| Functional Length (Decimal Inch) | 0.2020 |
| Primary Workpiece Material | Steel |
| Primary Workpiece Material Code | P |
| Standards | ANSI |
| Height (mm) | 7.00 |
| Overall Length/Projection (Decimal Inch) | 0.2760 |
| Drill Point Angle | 140 |
| Flute Type | Helical |
| Insert Holding Method | Clamp |
| ISO Number | TPA1230R01 IN2505 |
| Coolant Through | Yes |
| Flute Length (mm) | 5.00 |
| Point Type | Standard |
| Spiral Type | Regular Spiral |
| Style | TPA |
| UNSPSC Code | 23242105 |
| Applications | Drilling; Coolant-Thru; Spot Drilling |
| Coating/Finish | TiN; TiAlN |
| Included Angle Degree | 140 |
| Number Of Flutes | 2 |
| Cutting Diameter (Inch) | 31/64 |
| Cutting Diameter (Decimal Inch) | 0.4843 |
| Cutting Diameter (mm) | 12.30 |
| Tip Material | Solid Carbide |
| Manufacturer Grade | IN2505 |
| Material Grade | P15; P30 |
| Series | TPA |
| Coating Process | PVD |
| Insert Seat Size | 12 |
| Functional Length (Decimal Inch) | 0.2020 |
| Primary Workpiece Material | Steel |
| Primary Workpiece Material Code | P |
| Standards | ANSI |
| Height (mm) | 7.00 |
| Overall Length/Projection (Decimal Inch) | 0.2760 |
| Drill Point Angle | 140 |
| Flute Type | Helical |
| Insert Holding Method | Clamp |
| ISO Number | TPA1230R01 IN2505 |
| Coolant Through | Yes |
| Flute Length (mm) | 5.00 |
| Point Type | Standard |
| Spiral Type | Regular Spiral |
| Style | TPA |
| UNSPSC Code | 23242105 |
| Applications | Drilling; Coolant-Thru; Spot Drilling |
| Coating/Finish | TiN; TiAlN |
| Included Angle Degree | 140 |
| Number Of Flutes | 2 |
| MSC Part # | 72150089 |
| Mfr Part # | 5120023 |
$103.95
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Electrical Tape: 1-1/2" Wide, 110' Long, 8.5 mil Thick, Black
Item #: 72361595
Brand: 3M
Model #: 7000031459
Product Specifications
| Width (Inch) | 1-1/2 |
| Length Range | 36 to 71.9 Yd |
| Thickness (mil) | 8.5000 |
| Color | Black |
| Series | 88 |
| Series Part Number | 88 |
| Adhesive Material | Rubber |
| Tensile Strength (Lb./Inch) | 20.00 |
| Standards | ASTM D-3005 Type 2; SS 404 09 75; Standard C22.2 No. 197- M1983 PVC Insulating Tape (File LR48769); CSA Certified; VDE 0340 TEIL 3-1; MIL-I-24391C; UL 510 File E129200 |
| Length (Meters) | 33.00 |
| Applications | Bundling; Protecting; Insulating |
| Minimum Operating Temperature F | 0.00 |
| Maximum Operating Temperature F | 220.00 |
| Length (Yards - 2 Decimals) | 36.00 |
| Minimum Operating Temperature C | -18.00 |
| Length Ft. | 110.00 |
| Maximum Operating Temperature C | 105.00 |
| Width (mm - 2 Decimals) | 38.00 |
| UNSPSC Code | 31201502 |
| Width (Inch) | 1-1/2 |
| Length Range | 36 to 71.9 Yd |
| Thickness (mil) | 8.5000 |
| Color | Black |
| Series | 88 |
| Series Part Number | 88 |
| Adhesive Material | Rubber |
| Tensile Strength (Lb./Inch) | 20.00 |
| Standards | ASTM D-3005 Type 2; SS 404 09 75; Standard C22.2 No. 197- M1983 PVC Insulating Tape (File LR48769); CSA Certified; VDE 0340 TEIL 3-1; MIL-I-24391C; UL 510 File E129200 |
| Length (Meters) | 33.00 |
| Applications | Bundling; Protecting; Insulating |
| Minimum Operating Temperature F | 0.00 |
| Maximum Operating Temperature F | 220.00 |
| Length (Yards - 2 Decimals) | 36.00 |
| Minimum Operating Temperature C | -18.00 |
| Length Ft. | 110.00 |
| Maximum Operating Temperature C | 105.00 |
| Width (mm - 2 Decimals) | 38.00 |
| UNSPSC Code | 31201502 |
| MSC Part # | 72361595 |
| Mfr Part # | 7000031459 |
$51.90
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
17-4 PH Stainless Steel Round Rod: 3-1/2" Dia, 3' Long
Item #: 75274787
Brand: Value Collection
Model #: 75274787
Product Specifications
| Stainless Steel Type | 17-4 PH |
| Diameter (Inch, Fraction) | 3-1/2 |
| Length (Feet) | 3 |
| UNSPSC Code | 30102405 |
| Stainless Steel Type | 17-4 PH |
| Diameter (Inch, Fraction) | 3-1/2 |
| Length (Feet) | 3 |
| UNSPSC Code | 30102405 |
| MSC Part # | 75274787 |
| Mfr Part # | 75274787 |
$1,558.73
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.3450; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
Item #: 76210822
Brand: GSG
Model #: GSG-CR-1.345C
Product Specifications
| Material | Solid Carbide |
| Tolerance (Decimal Inch) | 0.00000/-0.00003 |
| Blank Number Wire Size | #5 |
| Inner Diameter (Decimal Inch) | 1.3450 |
| Calibrated | Yes |
| Traceability Certification Included | NIST |
| Go/No Go | Go |
| Standards | B47.1 Gage Standards; ASME B89.1.6 |
| UNSPSC Code | 41111619 |
| Country of Origin | UNITED STATES |
$1,296.78
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00002; Blank Number Wire Size: #2; Inner Diameter (Decimal Inch): 0.4683; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
Item #: 80742216
Brand: GSG
Model #: GSG-CR-0.4683C
Product Specifications
| Material | Solid Carbide |
| Tolerance (Decimal Inch) | 0.00000/-0.00002 |
| Blank Number Wire Size | #2 |
| Inner Diameter (Decimal Inch) | 0.4683 |
| Calibrated | Yes |
| Traceability Certification Included | NIST |
| Go/No Go | Go |
| Standards | B47.1 Gage Standards; ASME B89.1.6 |
| UNSPSC Code | 41111619 |
| Country of Origin | UNITED STATES |
$673.11
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Rounding End Mill: 5/64" Radius, 5/16" Dia, 5 Flutes, Solid Carbide
Item #: 81511271
Brand: Helical Solutions
Model #: 88486
Product Specifications
| Mill Diameter (Inch) | 5/16 |
| Mill Diameter (Decimal Inch) | 0.3125 |
| End Mill Material | Solid Carbide |
| Number Of Flutes | 5 |
| Radius (Decimal Inch) | 0.0780 |
| Radius (Inch) | 5/64 |
| Shank Type | Cylindrical |
| Flute Type | Straight |
| Shank Diameter (Inch) | 5/16 |
| Shank Diameter (Decimal Inch) | 0.3125 |
| Tip Diameter (Decimal Inch) | 0.1460 |
| Overall Length (Inch) | 2 |
| Overall Length (Decimal Inch) | 2 |
| Flute Direction | Right Hand |
| Series | Specialty Profiles - Corner Rounding End Mills - Helical Flute - 3 & 5 Flute |
| Coolant Through | No |
| Single Or Double End | Single |
| Coating/Finish | Zplus |
| UNSPSC Code | 27112803 |
| Country of Origin | UNITED STATES |
$127.41
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00004; Blank Number Wire Size: #6; Inner Diameter (Decimal Inch): 1.6378; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1
Item #: 81820433
Brand: GSG
Model #: GSG-CR-1.6378C
Product Specifications
| Material | Solid Carbide |
| Tolerance (Decimal Inch) | 0.00000/-0.00004 |
| Blank Number Wire Size | #6 |
| Inner Diameter (Decimal Inch) | 1.6378 |
| Calibrated | Yes |
| Traceability Certification Included | NIST |
| Go/No Go | Go |
| Standards | B47.1 Gage Standards; ASME B89.1.6 |
| UNSPSC Code | 41111619 |
| Country of Origin | UNITED STATES |
$1,704.38
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It