Power Tools > Power Grinders Buffers & Sanders (ET04) - (5677 Products)
13″ Bore Diameter × 10″ Hone Length × 34″ Overall Length, 240 Grit, Aluminum Oxide - Heavy Duty Flex-Hone
Item #: MJ73GBD1300240A
Brand: Brush Research
Model #: GBD1300240AO
| Product Specifications | |
|---|---|
| Type | Heavy Duty Flex-Hone |
| Hone Length | 10″ |
| Abrasive Material | Aluminum Oxide |
| Overall Length | 34″ |
| Grit | 240 |
| Specification | Non-ferrous Materials |
| Bore Diameter | 13″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
55 CARB TWIST DRILL
Item #: MW23450300520
Brand: Monster Tool Company
Model #: 450-300520
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | #55 |
| Cutting Edge Material | Solid Tungsten Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #55 |
| Grade | C-2 Sub-Micron |
| Length Group | Jobber |
| Point Shape | Drill Point |
| Coating | Bright |
| Measurement Type | Wire Gauge |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Aluminum / Non-Ferrous Materials | |
| Series/List # | 450 |
| Application | | Drilling | |
| Length Chip Flute (LCF) | 3/4″ |
| Connection Diameter Machine Side (DCONMS) | 0.052″ |
| Overall Length (OAL) | 1-1/2″ |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 118 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 25 Degrees |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 3/16″ Dia. × 3/8″ LOC × 3/16″ Shank Dia. × 2″ OAL, 4 FL, Carbide, AlTiN
Item #: TA15TC11712
Brand: Titan USA
Model #: TC11712
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Usable Length (LU) | 3/8″ |
| Depth of Cut Maximum (APMX) | 3/8″ |
| Corner Radius (RE) | 3/32″ |
| Overall Length (OAL) | 2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.1875″ |
| Coating | TiAlN |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 3/16″ Dia. × 3/8″ LOC × 3/16″ Shank Dia. × 2″ OAL, 4 FL, Carbide, TiN
Item #: TA15TC95626
Brand: Titan USA
Model #: TC95626
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Usable Length (LU) | 3/8″ |
| Depth of Cut Maximum (APMX) | 3/8″ |
| Corner Radius (RE) | 3/32″ |
| Overall Length (OAL) | 2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.1875″ |
| Coating | TiN |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.053-4FL-SE-REG-BALL
Item #: MW21250340053
Brand: Monster Tool Company
Model #: 250-340053
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.053″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 0.159″ |
| Length Group | Regular |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.053″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Super-Alloys / Titanium | |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
#8-36 × 1/8″ Shank Dia. × 2″ OAL, Carbide, TiAlN, Thread Mill
Item #: TA15TC84005
Brand: Titan USA
Model #: TC84005
| Product Specifications | |
|---|---|
| Thread Size | #8 |
| Flute Count (NOF) | 3 |
| Threads per Inch (TPI) | 36 |
| Coating | TiAlN |
| Thread Standard | UN |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Tool Type | Thread Mill |
| Cutting Diameter (DC) | 0.115″ |
| Depth of Cut Maximum (APMX) | 1/4″ |
| Overall Length (OAL) | 2″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
45/64″ Dia. × 1/2″ Shank Size × 3″ Flute Length × 6″ OAL, 2 Flute, Gold Oxide Coated, HSS M42, Reduced Shank, Silver and Deming Drill
Item #: TA15SD93645
Brand: Titan USA
Model #: SD93645
| Product Specifications | |
|---|---|
| Tool Diameter | 45/64″ |
| Usable Length (LU) | 3″ |
| Angle | 135 Degrees |
| Measurement Type | Inch |
| Coating | Gold Oxide |
| Flute Count (NOF) | 2 |
| Shank Size (SS) | 1/2″ |
| Overall Length (OAL) | 6″ |
| Cutting Edge Material | HSS M42 |
| Shank Type | Reduced |
| Decimal Equivalent | 0.7031″ |
| Tool Type | Silver and Deming |
| Flute Length | 3″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.022-2FL-SE-REG-BALL-AlTiN
Item #: MW21250320022B
Brand: Monster Tool Company
Model #: 250-320022B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.022″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 0.066″ |
| Length Group | Regular |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.022″ |
| Coating | TiAlN |
| Series/List # | 250 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
37 CARB TWIST DRILL AlTiN
Item #: MW23450301040B
Brand: Monster Tool Company
Model #: 450-301040B
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | #37 |
| Cutting Edge Material | Solid Tungsten Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #37 |
| Grade | C-2 Sub-Micron |
| Length Group | Jobber |
| Point Shape | Drill Point |
| Coating | TiAlN |
| Measurement Type | Wire Gauge |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | |
| Series/List # | 450 |
| Application | | Drilling | |
| Length Chip Flute (LCF) | 1-1/4″ |
| Connection Diameter Machine Side (DCONMS) | 0.104″ |
| Overall Length (OAL) | 2-1/4″ |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 118 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 25 Degrees |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7.7 mm Dia. × 8 mm Shank Dia. × 314 mm OAL, 140 Degrees, 30xD, 2 Flutes, Aqua Revo D, Solid Carbide Drills
Item #: AC880732551
Brand: Nachi America Inc
Model #: 0732551
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 7.7 mm |
| Functional Length (LF) | 264 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 7.7 mm |
| Tool Type | Drill |
| Length Group | 30xD |
| Usable Length (LU) | 266 mm |
| Coating | Aqua Revo D |
| Overall Length (OAL) | 314 mm |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 140 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7.7 mm Dia. × 8 mm Shank Dia. × 94 mm OAL, 140 Degrees, 3xD, 2 Flutes, Aqua Revo D, Solid Carbide Drills
Item #: AC880775654
Brand: Nachi America Inc
Model #: 0775654
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 7.7 mm |
| Functional Length (LF) | 42 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 7.7 mm |
| Tool Type | Drill |
| Length Group | 3xD |
| Usable Length (LU) | 44 mm |
| Coating | Aqua Revo D |
| Overall Length (OAL) | 94 mm |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 140 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It