Email: sales@benchmarktooling.com | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

MSC Up To 2022 Part 3 - (25001 Products)

Norgren - 5" Stroke x 1-1/2" Bore Double Acting Air Cylinder - 1/8 Port, 7/16-20 Rod Thread - Benchmark Tooling

Norgren - 5" Stroke x 1-1/2" Bore Double Acting Air Cylinder - 1/8 Port, 7/16-20 Rod Thread


Item #: 36697209
Brand: Norgren
Model #: RP150X5.000-DAD
Exact Tooling IR#: 04

Product Specifications
Type Double Acting
Bore Size (Inch) 1-1/2
Bore Size (Decimal Inch) 1.50
Rod Diameter (Decimal Inch) 0.437
Stroke Length (Inch) 5
Stroke Length (Decimal Inch) 5.0000
Port Size 1/8
Port Type NPTF
Length (Decimal Inch) 10.750
Mount Thread 3/4-16
Rod Thread Size 7/16-20

$96.75

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SKF - 55mm Bore Diam, 100mm OD, Double Shield Deep Groove Radial Ball Bearing - 21mm Wide, 1 Row, Round Bore, 29,000 Nm Static Capacity, 46,200 Nm Dynamic Capacity - Benchmark Tooling

SKF - 55mm Bore Diam, 100mm OD, Double Shield Deep Groove Radial Ball Bearing - 21mm Wide, 1 Row, Round Bore, 29,000 Nm Static Capacity, 46,200 Nm Dynamic Capacity


Item #: 45667631
Brand: SKF
Model #: 6211 2ZJEM
Exact Tooling IR#: 04

Features and Benefits

Deep groove ball bearings are used for high and very high speeds in operations, requiring little maintenance. They are designed with balls rolling between an inner and outer raceway. They are commonly used in pumps, gear motors and electric motors.
Double shield refers to two shields, one on each side of the bearing. The shield is located on the outer race does not make contact with the inner race. Ideal for very high speeds, but does not prevent smaller contaminants from entering the bearing. They are more economical than seals.
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Deep Groove
Style Double Shield
Bore Diameter (mm) 55.00
Outside Diameter (mm) 100.00
Outside Diameter (Decimal Inch) 3.9400
Width (Decimal Inch) 0.8300
Width (mm) 21.00
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Housing Material Steel
Snap Ring Included Without Snap Ring
Static Load Capacity (Nm) 29000
Dynamic Load Capacity (Nm) 46200
ABEC Scale ABEC-3
Maximum RPM 7000

$166.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

RobbJack - 2-1/4" Diam x 0.0156" Blade Thickness x 5/8" Arbor Hole Diam, 28 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, Concave Ground - Benchmark Tooling

RobbJack - 2-1/4" Diam x 0.0156" Blade Thickness x 5/8" Arbor Hole Diam, 28 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, Concave Ground


Item #: 02118339
Brand: RobbJack
Model #: C22-0156-20-28
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Material Solid Carbide
Blade Diameter (Decimal Inch) 2.25
Blade Diameter (Inch) 2-1/4
Blade Thickness (Decimal Inch) 0.0156
Arbor Hole Diameter (Inch) 5/8
Connection Type Arbor
Number of Teeth 28
Cutting Direction Right Hand
Features Concave Ground
Finish/Coating Uncoated
Material Application Aluminum; Brass; Composites; Copper; Magnesium; Plastics
Tooth Configuration Straight

$133.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Onsrud - 5/16" Cutting Diam x 1-1/8" Length of Cut, 2 Flute, Upcut Spiral Router Bit - Uncoated, Right Hand Cut, Solid Carbide, 3" OAL x 5/16" Shank Diam, Ball End Taper, 30° Helix Angle - Benchmark Tooling

Onsrud - 5/16" Cutting Diam x 1-1/8" Length of Cut, 2 Flute, Upcut Spiral Router Bit - Uncoated, Right Hand Cut, Solid Carbide, 3" OAL x 5/16" Shank Diam, Ball End Taper, 30° Helix Angle


Item #: 53397121
Brand: Onsrud
Model #: 65-240B
Exact Tooling IR#: 04

Features and Benefits

Solid carbide is used for high performace applications. It is extremely heat resistant and used on cast iron, non-ferrous metals and other tough to machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
Product Specifications
Cutting Diameter (mm) 7.94
Cutting Diameter (Inch) 5/16
Cutting Diameter (Decimal Inch) 0.3125
Number of Flutes 2
Flute Type Upcut
Cutting Direction Right Hand
Material Application Plastics
Material Solid Carbide
Length of Cut (mm) 25.53
Length of Cut (Decimal Inch) 1.1250
Length of Cut (Inch) 1-1/8
Shank Diameter (mm) 7.94
Shank Diameter (Inch) 5/16
Shank Diameter (Decimal Inch) 0.3125
Overall Length (mm) 76.20
Overall Length (Inch) 3
Router Style Ball End Taper
Finish/Coating Uncoated
Piloted No
Helix Angle 30
Taper Angle Per Side 0

$145.70

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 1/2" Diam, 1-1/4" LOC, 3 Flute Solid Carbide Roughing & Finishing Square End Mill - ZrN Finish, 3" OAL, 1/2" Shank Diam, Straight Shank, 37° Helix, Centercutting - Benchmark Tooling

Accupro - 1/2" Diam, 1-1/4" LOC, 3 Flute Solid Carbide Roughing & Finishing Square End Mill - ZrN Finish, 3" OAL, 1/2" Shank Diam, Straight Shank, 37° Helix, Centercutting


Item #: 85646362
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastic and other tough-to-machine materials.
Zirconium nitride (ZrN) is similar to TiN, but has a higher oxidation temperature. It is commonly used on nonferrous materials including aluminum, brass, copper and titanium.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
End Type Square
Number of Flutes 3
Material Solid Carbide
Finish/Coating ZrN
Length of Cut (Inch) 1-1/4
Length of Cut (Decimal Inch) 1.2500
Shank Diameter (Inch) 1/2
Overall Length (Inch) 3
Centercutting Center Cutting
Extended Reach NonExtendedReach
Chipbreaker Yes
Shank Type Straight Shank
Helix Angle 37
Material Grade Micrograin
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.005
Shank Diameter Tolerance (Decimal Inch) +0.0001/-0.0004

$131.01

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

RobbJack - 2-1/4" Diam x 0.014" Blade Thickness x 5/8" Arbor Hole Diam, 56 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, Concave Ground - Benchmark Tooling

RobbJack - 2-1/4" Diam x 0.014" Blade Thickness x 5/8" Arbor Hole Diam, 56 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, Concave Ground


Item #: 02118321
Brand: RobbJack
Model #: C22-0140-20-56
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Material Solid Carbide
Blade Diameter (Decimal Inch) 2.25
Blade Diameter (Inch) 2-1/4
Blade Thickness (Decimal Inch) 0.0140
Arbor Hole Diameter (Inch) 5/8
Connection Type Arbor
Number of Teeth 56
Cutting Direction Right Hand
Features Concave Ground
Finish/Coating Uncoated
Material Application Cast Iron; Stainless Steel; Steel; Super Alloy; Titanium
Tooth Configuration Straight

$133.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Niagara Cutter - 3/8", 1/2" LOC, 3/8" Shank Diam, 6" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series AN345 - Benchmark Tooling

Niagara Cutter - 3/8", 1/2" LOC, 3/8" Shank Diam, 6" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 45° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series AN345


Item #: 85610509
Brand: Niagara Cutter
Model #: N18601
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 3/8
Mill Diameter (Decimal Inch) 0.3750
Number of Flutes 3
Length of Cut (Inch) 1/2
Length of Cut (Decimal Inch) 0.5000
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (Inch) 3/8
Single or Double End Single
Overall Length (Inch) 6
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 45.00
Flute Type Spiral
Length Type Long
Reach Length (Inch) 4-1/8
Chipbreaker No
Extended Reach Yes
Series/List AN345

$150.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Controx - 1" Diam x 0.025" Blade Thickness x 3/8" Arbor Hole Diam, 40 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, Concave Ground - Benchmark Tooling

Controx - 1" Diam x 0.025" Blade Thickness x 3/8" Arbor Hole Diam, 40 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, Concave Ground


Item #: 58180134
Brand: Controx
Model #: 13500250630001
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Material Solid Carbide
Blade Diameter (Decimal Inch) 1.00
Blade Diameter (Inch) 1
Blade Thickness (Decimal Inch) 0.0250
Arbor Hole Diameter (Inch) 3/8
Connection Type Arbor
Number of Teeth 40
Cutting Direction Right Hand
Features Concave Ground
Finish/Coating Uncoated
Tooth Configuration Straight

$46.20

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Sandvik Coromant - 1mm Diam, 1.5mm LOC, Solid Carbide Ball End Mill - 57mm OAL, 6mm Shank Diam, Ball Flute - Benchmark Tooling

Sandvik Coromant - 1mm Diam, 1.5mm LOC, Solid Carbide Ball End Mill - 57mm OAL, 6mm Shank Diam, Ball Flute


Item #: 49395718
Brand: Sandvik Coromant
Model #: 5743379
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Mill Diameter (mm) 1.00
Mill Diameter (Decimal Inch) 0.0394
Length of Cut (mm) 1.50
Length of Cut (Decimal Inch) 0.0591
Material Solid Carbide
Overall Length (mm) 57.00
Shank Diameter (mm) 6.00
Helix Angle 30.00
Mill Diameter Tolerance (mm) h9
Mill Diameter Tolerance (Decimal Inch) h9
Flute Type Ball
Shank Diameter Tolerance (mm) h6
Shank Diameter Tolerance (Decimal Inch) h6
Series/List CoroMill Plura
Cutting Direction Right Hand
Flute Direction Right Hand

$163.35

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 1mm Diam, 0.63mm LOC, 2 Flute Solid Carbide Ball End Mill - WXL Finish, Single End, 90mm OAL, 4mm Shank Diam - Benchmark Tooling

OSG - 1mm Diam, 0.63mm LOC, 2 Flute Solid Carbide Ball End Mill - WXL Finish, Single End, 90mm OAL, 4mm Shank Diam


Item #: 42570200
Brand: OSG
Model #: 3170148
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
WXL is a nano-coating that yields higher hardness and oxidation temperature versus TiAlN. It is ideal for steels and hardened steels and for non-ferrous materials. WXL is a proprietary coating exclusive to OSG Tap and Die, Inc.
Product Specifications
Mill Diameter (mm) 1.00
Mill Diameter (Decimal Inch) 0.0394
Number of Flutes 2
Length of Cut (mm) 0.63
Length of Cut (Decimal Inch) 0.0248
Material Solid Carbide
Overall Length (mm) 90.00
Shank Diameter (mm) 4.00
Finish/Coating WXL
Single or Double End Single
Helix Angle 30.00
Extended Reach Yes
Reach Length (mm) 50.00
Cutting Direction Right Hand
Flute Direction Right Hand

$146.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hertel - 1/2" Diam, 5/8" LOC, 4 Flute Solid Carbide Roughing Square End Mill - TiN Finish, 2-1/2" OAL, 1/2" Shank Diam, Single End, Centercutting - Benchmark Tooling

Hertel - 1/2" Diam, 5/8" LOC, 4 Flute Solid Carbide Roughing Square End Mill - TiN Finish, 2-1/2" OAL, 1/2" Shank Diam, Single End, Centercutting


Item #: 74458159
Brand: Hertel
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Product Specifications
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
Number of Flutes 4
Length of Cut (Inch) 5/8
Length of Cut (Decimal Inch) 0.6250
Shank Diameter (Inch) 1/2
End Type Square End
Material Solid Carbide
Finish/Coating TiN
Overall Length (Inch) 2-1/2
Centercutting Center Cutting
Extended Reach No
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Length Type Regular
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.005
Shank Diameter Tolerance (Decimal Inch) +0.0001/-0.0004
TIR Maximum (Decimal Inch) 0.0005
Chipbreaker Yes

$137.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 3/4", 3" LOC, 3/4" Shank Diam, 5-1/4" OAL, 3 Flute, Powdered Metal Square End Mill - Single End, Uncoated, Spiral Flute, 42° Helix, Centercutting, Right Hand Cut, Right Hand Flute - Benchmark Tooling

Accupro - 3/4", 3" LOC, 3/4" Shank Diam, 5-1/4" OAL, 3 Flute, Powdered Metal Square End Mill - Single End, Uncoated, Spiral Flute, 42° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 87620746
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Powdered Metal (PM) is tougher and more cost effective than solid carbide. It is commonly used on highly abrasive materials including high silicon aluminums.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 3/4
Mill Diameter (Decimal Inch) 0.7500
Number of Flutes 3
Length of Cut (Inch) 3
Length of Cut (Decimal Inch) 3.0000
Material Powdered Metal
Finish/Coating Uncoated
Shank Diameter (Inch) 3/4
Single or Double End Single
Overall Length (Inch) 5-1/4
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 42.00
Flute Type Spiral
Mill Diameter Tolerance (Decimal Inch) +0.0015/-0.0000
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0005

$110.53

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DORMER - 4 Flute Solid Carbide Roughing & Finishing Square End Mill - AlCrN Finish, Weldon Shank, 35° Helix, Centercutting, Stub Length - Benchmark Tooling

DORMER - 4 Flute Solid Carbide Roughing & Finishing Square End Mill - AlCrN Finish, Weldon Shank, 35° Helix, Centercutting, Stub Length


Item #: 65692311
Brand: DORMER
Model #: 0642658
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastic and other tough-to-machine materials.
Aluminum chromium nitride (AlCrN) has a higher heat resistance than AlTiN. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 6.00
Mill Diameter (Decimal Inch) 0.2364
End Type Square
Number of Flutes 4
Material Solid Carbide
Finish/Coating AlCrN
Length of Cut (mm) 13
Length of Cut (Decimal Inch) 0.5122
Shank Diameter (mm) 6
Overall Length (mm) 57
Centercutting Center Cutting
Extended Reach NonExtendedReach
Chipbreaker No
Shank Type Weldon Shank
Helix Angle 35
Single or Double End Single
Length Type Stub
Cutting Direction Right Hand
Flute Direction Right Hand
Mill Diameter Tolerance (mm) 0.000/-0.048
Series/List S814HB

$70.15

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 8.5mm, 17mm LOC, 10mm Shank Diam, 70mm OAL, 2 Flute, Solid Carbide Square End Mill - Single End, WXL Finish, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 3721 - Benchmark Tooling

OSG - 8.5mm, 17mm LOC, 10mm Shank Diam, 70mm OAL, 2 Flute, Solid Carbide Square End Mill - Single End, WXL Finish, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 3721


Item #: 42607663
Brand: OSG
Model #: 3182085
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
WXL is a nano-coating that yields higher hardness and oxidation temperature versus TiAlN. It is ideal for steels and hardened steels and for non-ferrous materials. WXL is a proprietary coating exclusive to OSG Tap and Die, Inc.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 8.50
Mill Diameter (Decimal Inch) 0.3346
Number of Flutes 2
Length of Cut (mm) 17.00
Length of Cut (Decimal Inch) 0.6693
Material Solid Carbide
Finish/Coating WXL
Shank Diameter (mm) 10.00
Single or Double End Single
Overall Length (mm) 70.00
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Extended Reach No
Series/List 3721

$139.63

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

RobbJack - 2-1/4" Diam x 0.018" Blade Thickness x 5/8" Arbor Hole Diam, 28 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, Concave Ground - Benchmark Tooling

RobbJack - 2-1/4" Diam x 0.018" Blade Thickness x 5/8" Arbor Hole Diam, 28 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, Concave Ground


Item #: 02118354
Brand: RobbJack
Model #: C22-0180-20-28
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Material Solid Carbide
Blade Diameter (Decimal Inch) 2.25
Blade Diameter (Inch) 2-1/4
Blade Thickness (Decimal Inch) 0.0180
Arbor Hole Diameter (Inch) 5/8
Connection Type Arbor
Number of Teeth 28
Cutting Direction Right Hand
Features Concave Ground
Finish/Coating Uncoated
Material Application Aluminum; Brass; Composites; Copper; Magnesium; Plastics
Tooth Configuration Straight

$133.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

RobbJack - 2-1/4" Diam x 0.018" Blade Thickness x 5/8" Arbor Hole Diam, 56 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, Concave Ground - Benchmark Tooling

RobbJack - 2-1/4" Diam x 0.018" Blade Thickness x 5/8" Arbor Hole Diam, 56 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, Concave Ground


Item #: 02118362
Brand: RobbJack
Model #: C22-0180-20-56
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Material Solid Carbide
Blade Diameter (Decimal Inch) 2.25
Blade Diameter (Inch) 2-1/4
Blade Thickness (Decimal Inch) 0.0180
Arbor Hole Diameter (Inch) 5/8
Connection Type Arbor
Number of Teeth 56
Cutting Direction Right Hand
Features Concave Ground
Finish/Coating Uncoated
Material Application Cast Iron; Stainless Steel; Steel; Super Alloy; Titanium
Tooth Configuration Straight

$133.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

DORMER - 4 Flute Solid Carbide Roughing & Finishing Square End Mill - AlCrN Finish, Weldon Shank, 35° Helix, Centercutting, Stub Length - Benchmark Tooling

DORMER - 4 Flute Solid Carbide Roughing & Finishing Square End Mill - AlCrN Finish, Weldon Shank, 35° Helix, Centercutting, Stub Length


Item #: 65692626
Brand: DORMER
Model #: 0642634
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastic and other tough-to-machine materials.
Aluminum chromium nitride (AlCrN) has a higher heat resistance than AlTiN. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 4.00
Mill Diameter (Decimal Inch) 0.1576
End Type Square
Number of Flutes 4
Material Solid Carbide
Finish/Coating AlCrN
Length of Cut (mm) 11
Length of Cut (Decimal Inch) 0.4334
Shank Diameter (mm) 6
Overall Length (mm) 57
Centercutting Center Cutting
Extended Reach NonExtendedReach
Chipbreaker No
Shank Type Weldon Shank
Helix Angle 35
Single or Double End Single
Length Type Stub
Cutting Direction Right Hand
Flute Direction Right Hand
Mill Diameter Tolerance (mm) 0.000/-0.048
Series/List S814HB

$68.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

RobbJack - 2-1/4" Diam x 0.012" Blade Thickness x 5/8" Arbor Hole Diam, 56 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, Concave Ground - Benchmark Tooling

RobbJack - 2-1/4" Diam x 0.012" Blade Thickness x 5/8" Arbor Hole Diam, 56 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, Concave Ground


Item #: 02118305
Brand: RobbJack
Model #: C22-0120-20-56
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Material Solid Carbide
Blade Diameter (Decimal Inch) 2.25
Blade Diameter (Inch) 2-1/4
Blade Thickness (Decimal Inch) 0.0120
Arbor Hole Diameter (Inch) 5/8
Connection Type Arbor
Number of Teeth 56
Cutting Direction Right Hand
Features Concave Ground
Finish/Coating Uncoated
Material Application Cast Iron; Stainless Steel; Steel; Super Alloy; Titanium
Tooth Configuration Straight

$133.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Controx - 1" Diam x 0.025" Blade Thickness x 3/8" Arbor Hole Diam, 20 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, 15° Rake, Concave Ground - Benchmark Tooling

Controx - 1" Diam x 0.025" Blade Thickness x 3/8" Arbor Hole Diam, 20 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, 15° Rake, Concave Ground


Item #: 58183575
Brand: Controx
Model #: 12500250630001
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Material Solid Carbide
Blade Diameter (Decimal Inch) 1.00
Blade Diameter (Inch) 1
Blade Thickness (Inch) 0.0250
Blade Thickness (Decimal Inch) 0.0250
Arbor Hole Diameter (Inch) 3/8
Connection Type Arbor
Number of Teeth 20
Cutting Direction Right Hand
Features Concave Ground
Finish/Coating Uncoated
Rake Angle 15
Tooth Configuration Straight

$46.20

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

RobbJack - 2-1/4" Diam x 0.012" Blade Thickness x 5/8" Arbor Hole Diam, 28 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, Concave Ground - Benchmark Tooling

RobbJack - 2-1/4" Diam x 0.012" Blade Thickness x 5/8" Arbor Hole Diam, 28 Tooth Slitting and Slotting Saw - Arbor Connection, Right Hand, Uncoated, Solid Carbide, Concave Ground


Item #: 02118297
Brand: RobbJack
Model #: C22-0120-20-28
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Material Solid Carbide
Blade Diameter (Decimal Inch) 2.25
Blade Diameter (Inch) 2-1/4
Blade Thickness (Decimal Inch) 0.0120
Arbor Hole Diameter (Inch) 5/8
Connection Type Arbor
Number of Teeth 28
Cutting Direction Right Hand
Features Concave Ground
Finish/Coating Uncoated
Material Application Aluminum; Brass; Composites; Copper; Magnesium; Plastics
Tooth Configuration Straight

$133.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It