MSC Up To 2022 Part 2 - (153537 Products)
Keo - 4-1/2" 12-Flute Cobalt Rougher Shell End Mill
Item #: 10645554
Brand: Keo
Model #: 949-000-069
Features and Benefits
Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
| Product Specifications | |
|---|---|
| Mill Diameter (Inch) | 4-1/2 |
| Material | Cobalt |
| End Mill Type | Rougher |
| Arbor Hole Diameter (Inch) | 1-1/2 |
| Length of Cut (Inch) | 2-1/4 |
| Number of Flutes | 12 |
| Cutting Direction | Right Hand |
| Flute Type | Spiral |
| Flute Direction | Right Hand |
| Finish/Coating | TiN |
| Material Grade | M42 |
| Pitch | Fine |
$1,102.74
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - 4-1/2" 12-Flute Cobalt Rougher Shell End Mill
Item #: 10645224
Brand: Keo
Model #: 949-000-029
Features and Benefits
Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
| Product Specifications | |
|---|---|
| Mill Diameter (Inch) | 4-1/2 |
| Material | Cobalt |
| End Mill Type | Rougher |
| Arbor Hole Diameter (Inch) | 3/4 |
| Length of Cut (Inch) | 2-1/4 |
| Number of Flutes | 12 |
| Cutting Direction | Right Hand |
| Flute Type | Spiral |
| Flute Direction | Right Hand |
| Finish/Coating | TiN |
| Material Grade | M42 |
| Pitch | Coarse |
$1,102.74
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - 9" Diam x 13/16" Face Width Straight Tooth Side Milling Cutter
Item #: 20079414
Brand: Keo
Model #: 952-000-760
Features and Benefits
Straight tooth cutters are used for general purpose applications and where a deeper cut is not required. They have more teeth than staggered cutters for a finer finish on the workpiece.
High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Titanium nitride (TiN) is a multi-purpose coating that increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
| Product Specifications | |
|---|---|
| Cutter Diameter (Inch) | 9 |
| Cutting Width (Inch) | 13/16 |
| Tooth Configuration | Straight |
| Material | High Speed Steel |
| Finish/Coating | TiN |
| Arbor Hole Diameter (Inch) | 1-1/4 |
| Number of Teeth | 36 |
| Material Grade | M2 |
$1,138.92
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - Concave Radius Cutters Connection Type: Arbor Radius (Inch): 3/4
Item #: 20084208
Brand: Keo
Model #: 904-000-028
Features and Benefits
High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Titanium nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Product Specifications
Concave Radius Cutters; Connection Type: Arbor ; Radius (Inch): 3/4 ; Circle Diameter (Decimal Inch): 0.0625 ; Diameter of Cutter (Inch): 5 ; Cutting Width (Inch): 1 ; Cutting Width (Decimal Inch): 2.2500
| Connection Type | Arbor |
| Radius (Inch) | 3/4 |
| Circle Diameter (Decimal Inch) | 0.0625 |
| Diameter of Cutter (Inch) | 5 |
| Cutting Width (Inch) | 1 |
| Cutting Width (Decimal Inch) | 2.2500 |
| Arbor Hole Diameter (Inch) | 1-1/4 |
| Overall Length (Inch) | 2-1/4 |
| Material | High Speed Steel |
| Finish/Coating | TiN |
| Relief Style | Form Relieved |
| Number of Teeth | 10 |
$1,095.98
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - 10" Diam x 13/32" Face Width Staggered Tooth Side Milling Cutter
Item #: 20072682
Brand: Keo
Model #: 952-001-225
Features and Benefits
Staggered tooth cutters are used for deep slotting and heavy milling applications. They have fewer teeth than straight cutters for better chip removal from the workpiece.
High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
| Product Specifications | |
|---|---|
| Cutter Diameter (Inch) | 10 |
| Cutting Width (Inch) | 13/32 |
| Tooth Configuration | Staggered |
| Material | High Speed Steel |
| Finish/Coating | Uncoated |
| Arbor Hole Diameter (Inch) | 1-1/2 |
| Number of Teeth | 32 |
| Material Grade | M2 |
$1,119.62
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - 4" Cut Diam x 6" Cut Width High Speed Steel Plain Milling Cutter
Item #: 20077509
Brand: Keo
Model #: 948-000-041
| Product Specifications | |
|---|---|
| Cutting Diameter (Inch) | 4 |
| Cutting Width (Inch) | 6 |
| Arbor Hole Diameter (Inch) | 1-1/4 |
| Cutting Direction | Right Hand |
| Helix Angle | 45 |
| Flute Direction | Left Hand |
| Material | High Speed Steel |
| Finish/Coating | Uncoated |
| Helix Style | High |
| Number of Teeth | 10 |
$1,113.40
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - 9" Diam x 3/4" Face Width Straight Tooth Side Milling Cutter
Item #: 20079505
Brand: Keo
Model #: 952-000-756
Features and Benefits
Straight tooth cutters are used for general purpose applications and where a deeper cut is not required. They have more teeth than staggered cutters for a finer finish on the workpiece.
High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Titanium nitride (TiN) is a multi-purpose coating that increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
| Product Specifications | |
|---|---|
| Cutter Diameter (Inch) | 9 |
| Cutting Width (Inch) | 3/4 |
| Tooth Configuration | Straight |
| Material | High Speed Steel |
| Finish/Coating | TiN |
| Arbor Hole Diameter (Inch) | 1-1/4 |
| Number of Teeth | 36 |
| Material Grade | M2 |
$1,112.99
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - 10" Diam x 9/32" Face Width Staggered Tooth Side Milling Cutter
Item #: 20073094
Brand: Keo
Model #: 952-001-220
Features and Benefits
Staggered tooth cutters are used for deep slotting and heavy milling applications. They have fewer teeth than straight cutters for better chip removal from the workpiece.
High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Titanium nitride (TiN) is a multi-purpose coating that increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
| Product Specifications | |
|---|---|
| Cutter Diameter (Inch) | 10 |
| Cutting Width (Inch) | 9/32 |
| Tooth Configuration | Staggered |
| Material | High Speed Steel |
| Finish/Coating | TiN |
| Arbor Hole Diameter (Inch) | 1-1/2 |
| Number of Teeth | 32 |
| Material Grade | M2 |
$1,113.72
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - 10" Diam x 3/8" Face Width Straight Tooth Side Milling Cutter
Item #: 20079562
Brand: Keo
Model #: 952-000-128
Features and Benefits
Straight tooth cutters are used for general purpose applications and where a deeper cut is not required. They have more teeth than staggered cutters for a finer finish on the workpiece.
High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Titanium nitride (TiN) is a multi-purpose coating that increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
| Product Specifications | |
|---|---|
| Cutter Diameter (Inch) | 10 |
| Cutting Width (Inch) | 3/8 |
| Tooth Configuration | Straight |
| Material | High Speed Steel |
| Finish/Coating | TiN |
| Arbor Hole Diameter (Inch) | 1-1/2 |
| Number of Teeth | 38 |
| Material Grade | M2 |
$1,110.10
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - 10" Diam x 9/16" Face Width Straight Tooth Side Milling Cutter
Item #: 20079158
Brand: Keo
Model #: 952-000-137
Features and Benefits
Straight tooth cutters are used for general purpose applications and where a deeper cut is not required. They have more teeth than staggered cutters for a finer finish on the workpiece.
High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
| Product Specifications | |
|---|---|
| Cutter Diameter (Inch) | 10 |
| Cutting Width (Inch) | 9/16 |
| Tooth Configuration | Straight |
| Material | High Speed Steel |
| Finish/Coating | Uncoated |
| Arbor Hole Diameter (Inch) | 1-1/2 |
| Number of Teeth | 38 |
| Material Grade | M2 |
$1,109.52
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - 9" Diam x 3/4" Face Width Staggered Tooth Side Milling Cutter
Item #: 20072716
Brand: Keo
Model #: 952-002-549
Features and Benefits
Staggered tooth cutters are used for deep slotting and heavy milling applications. They have fewer teeth than straight cutters for better chip removal from the workpiece.
High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
| Product Specifications | |
|---|---|
| Cutter Diameter (Inch) | 9 |
| Cutting Width (Inch) | 3/4 |
| Tooth Configuration | Staggered |
| Material | High Speed Steel |
| Finish/Coating | Uncoated |
| Arbor Hole Diameter (Inch) | 1-1/2 |
| Number of Teeth | 28 |
| Material Grade | M2 |
$1,105.78
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - 9" Diam x 3/4" Face Width Staggered Tooth Side Milling Cutter
Item #: 20072393
Brand: Keo
Model #: 952-002-545
Features and Benefits
Staggered tooth cutters are used for deep slotting and heavy milling applications. They have fewer teeth than straight cutters for better chip removal from the workpiece.
High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
| Product Specifications | |
|---|---|
| Cutter Diameter (Inch) | 9 |
| Cutting Width (Inch) | 3/4 |
| Tooth Configuration | Staggered |
| Material | High Speed Steel |
| Finish/Coating | Uncoated |
| Arbor Hole Diameter (Inch) | 1-1/4 |
| Number of Teeth | 28 |
| Material Grade | M2 |
$1,105.78
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - 10" Diam x 7/32" Face Width Staggered Tooth Side Milling Cutter
Item #: 20073136
Brand: Keo
Model #: 952-001-216
Features and Benefits
Staggered tooth cutters are used for deep slotting and heavy milling applications. They have fewer teeth than straight cutters for better chip removal from the workpiece.
High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Titanium nitride (TiN) is a multi-purpose coating that increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
| Product Specifications | |
|---|---|
| Cutter Diameter (Inch) | 10 |
| Cutting Width (Inch) | 7/32 |
| Tooth Configuration | Staggered |
| Material | High Speed Steel |
| Finish/Coating | TiN |
| Arbor Hole Diameter (Inch) | 1-1/2 |
| Number of Teeth | 32 |
| Material Grade | M2 |
$1,103.98
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - 8" Diam x 1" Face Width Staggered Tooth Side Milling Cutter
Item #: 20072799
Brand: Keo
Model #: 952-002-420
Features and Benefits
Staggered tooth cutters are used for deep slotting and heavy milling applications. They have fewer teeth than straight cutters for better chip removal from the workpiece.
High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Titanium nitride (TiN) is a multi-purpose coating that increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
| Product Specifications | |
|---|---|
| Cutter Diameter (Inch) | 8 |
| Cutting Width (Inch) | 1 |
| Tooth Configuration | Staggered |
| Material | High Speed Steel |
| Finish/Coating | TiN |
| Arbor Hole Diameter (Inch) | 1-1/4 |
| Number of Teeth | 28 |
| Material Grade | M2 |
$1,109.63
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - 8" Diam x 1" Face Width Staggered Tooth Side Milling Cutter
Item #: 20072849
Brand: Keo
Model #: 952-002-424
Features and Benefits
Staggered tooth cutters are used for deep slotting and heavy milling applications. They have fewer teeth than straight cutters for better chip removal from the workpiece.
High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Titanium nitride (TiN) is a multi-purpose coating that increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
| Product Specifications | |
|---|---|
| Cutter Diameter (Inch) | 8 |
| Cutting Width (Inch) | 1 |
| Tooth Configuration | Staggered |
| Material | High Speed Steel |
| Finish/Coating | TiN |
| Arbor Hole Diameter (Inch) | 1-1/2 |
| Number of Teeth | 28 |
| Material Grade | M2 |
$1,091.06
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - 2-21/32" Diam, 1-11/32" Wide, Cobalt T-Slot Cutter
Item #: 12209342
Brand: Keo
Model #: 964-000-004
Features and Benefits
Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on non-ferrous metals.
| Product Specifications | |
|---|---|
| Cutting Diameter (Inch) | 2-21/32 |
| Cutting Width (Inch) | 1-11/32 |
| Neck Diameter (Inch) | 1.4800 |
| Neck Diameter (mm) | 37.59 |
| Shank Diameter (Inch) | 1-1/4 |
| Overall Length (Inch) | 5-29/32 |
| Material | Cobalt |
| Finish/Coating | Uncoated |
| Number of Teeth | 10 |
| Bolt Size (Inch) | 1-1/2 |
| Material Grade | M42 |
| Weldon Flat | Yes |
| Roughing | Yes |
$1,052.34
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - 9" Diam x 11/16" Face Width Staggered Tooth Side Milling Cutter
Item #: 20072328
Brand: Keo
Model #: 952-002-541
Features and Benefits
Staggered tooth cutters are used for deep slotting and heavy milling applications. They have fewer teeth than straight cutters for better chip removal from the workpiece.
High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
| Product Specifications | |
|---|---|
| Cutter Diameter (Inch) | 9 |
| Cutting Width (Inch) | 11/16 |
| Tooth Configuration | Staggered |
| Material | High Speed Steel |
| Finish/Coating | Uncoated |
| Arbor Hole Diameter (Inch) | 1-1/2 |
| Number of Teeth | 28 |
| Material Grade | M2 |
$1,074.76
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - 9" Diam x 11/16" Face Width Straight Tooth Side Milling Cutter
Item #: 20079257
Brand: Keo
Model #: 952-000-752
Features and Benefits
Straight tooth cutters are used for general purpose applications and where a deeper cut is not required. They have more teeth than staggered cutters for a finer finish on the workpiece.
High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Titanium nitride (TiN) is a multi-purpose coating that increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
| Product Specifications | |
|---|---|
| Cutter Diameter (Inch) | 9 |
| Cutting Width (Inch) | 11/16 |
| Tooth Configuration | Straight |
| Material | High Speed Steel |
| Finish/Coating | TiN |
| Arbor Hole Diameter (Inch) | 1 |
| Number of Teeth | 36 |
| Material Grade | M2 |
$1,077.18
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - 10" Diam x 1/2" Face Width Straight Tooth Side Milling Cutter
Item #: 20079117
Brand: Keo
Model #: 952-000-133
Features and Benefits
Straight tooth cutters are used for general purpose applications and where a deeper cut is not required. They have more teeth than staggered cutters for a finer finish on the workpiece.
High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
| Product Specifications | |
|---|---|
| Cutter Diameter (Inch) | 10 |
| Cutting Width (Inch) | 1/2 |
| Tooth Configuration | Straight |
| Material | High Speed Steel |
| Finish/Coating | Uncoated |
| Arbor Hole Diameter (Inch) | 1-1/2 |
| Number of Teeth | 38 |
| Material Grade | M2 |
$1,070.84
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Keo - 8" Diam x 15/16" Face Width Staggered Tooth Side Milling Cutter
Item #: 20072880
Brand: Keo
Model #: 952-002-412
Features and Benefits
Staggered tooth cutters are used for deep slotting and heavy milling applications. They have fewer teeth than straight cutters for better chip removal from the workpiece.
High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Titanium nitride (TiN) is a multi-purpose coating that increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
| Product Specifications | |
|---|---|
| Cutter Diameter (Inch) | 8 |
| Cutting Width (Inch) | 15/16 |
| Tooth Configuration | Staggered |
| Material | High Speed Steel |
| Finish/Coating | TiN |
| Arbor Hole Diameter (Inch) | 1-1/4 |
| Number of Teeth | 28 |
| Material Grade | M2 |
$1,075.96
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It