#568B - Fits: 568A - Extra V-Block Clamp Only

Item #: MV7052591
Manufacturer: Starrett
Mfg #: 52591

Technical Specifications:
•Brand Name: Starrett •Description: Clamp Only •Fits: 568A •Model Number: 568B •Type: Extra V-Block Clamp Only

Description:
•Wide Range V-Blocks •Clamp can be mounted on V block in low or high position for small or large work. Clamps do not project; block can be used on base, ends or sides. Block holds round work up to 2diameter and square work up to 1-7/16(or 1-9/16square with screw at top). Tapped holes for mounting the V block on face plates or angle irons. V block is made of hardened steel. All sides are precision ground parallel and square and V-groove ground central and parallel to sides and base. V-grooves of matched pairs have perfect alignment.

Shipping Info:
•Actual Weight - .5000 •Dimensions - Height: 1.00 Length: 4.90 Width: 3.60

$44.87

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#NVB334I - 3 x 3 x 4'' - Single V-Block & Clamp

Item #: NG52NVB334I
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 9/32 to 1-9/16 •Model Number: NVB334I •Number of Blocks: 1 •Size: 3 x 3 x 4 •Type: V-Block & Clamp Set

Description:
•Precision made tool steel completely hardened and ground •A reversible swing-away clamp, combined with offset hole pattern, provides a variety of clamping possibilities •Block is slotted on sides to allow easy clamping to any surface

Shipping Info:
•Actual Weight - 9.1500 •Dimensions - Height: 5.00 Length: 5.00 Width: 4.40

$76.58

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#VB334 - 3 x 4 x 3'' - 90° V-Block & Clamp Set

Item #: NJ50VB334
Manufacturer: Suburban
Mfg #: VB334

Technical Specifications:
•Brand Name: Suburban •Capacity: 2-1/4 •Model Number: VB334 •Number of Blocks: 1 •Size: 3 x 4 x 3 •Squareness: .0002 •Type: 90° V-Block & Clamp Set •Weight: 9 lbs

Description:
•All vee blocks are parallel, square and central within .0002 •Each block comes with one clamp and blocks are available in matched pairs •All models are made of hardened steel.

Shipping Info:
•Actual Weight - 9.0000 •Dimensions - Height: 4.00 Length: 6.00 Width: 4.00

$355.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#VEB10 - 10 x 6-5/8 x 5'' - Cast Iron V-Block

Item #: NG54VEB10
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 5 •Model Number: VEB10 •Number of Blocks: 2 •Size: 10 x 6-5/8 x 5 •Type: Cast Iron V-Block

Description:
•Cast Iron V-Blocks •These vee blocks are manufactured from high quality close-grained gray iron castings seasoned as a precaution against distortion and accurately machined to very close tolerances.They are supplied in matched pairs, each block having a truly centered 90° vee.

Shipping Info:
•Actual Weight - 78.6500 •Dimensions - Height: 9.40 Length: 12.8 Width: 12.6 •Addl Fee Over 70lb-$23.00 per item

$306.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#52-475-005 - 1-3/8 x 1-5/8 x 1-3/4'' - V-Block & Clamp Set

Item #: NG5352475005
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 1 •Model Number: 52-475-005 •Number of Blocks: 2 •Size: 1-3/8 x 1-5/8 x 1-3/4 •Type: V-Block & Clamp Set

Description:
•All sides are ground square and parallel to each other.Matched accuracy .0002 90° vee s are ground central, parallel, and square with the ends precision ground, matched and numbered in pairs. •Hardened and ground chrome steel •Sold in precision matched pairs only •Compares with other V-Blocks costing twice as much

Shipping Info:
•Actual Weight - 2.3000 •Dimensions - Height: 2.70 Length: 3.70 Width: 2.90

$45.24

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#VEB12 - 12 x 8 x 7'' - Cast Iron V-Block

Item #: NG54VEB12
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 6-1/2 •Model Number: VEB12 •Number of Blocks: 2 •Size: 12 x 8 x 7 •Type: Cast Iron V-Block

Description:
•These vee blocks are manufactured from high quality close-grained gray iron castings seasoned as a precaution against distortion and accurately machined to very close tolerances. •They are supplied in matched pairs, each block having a truly centered 90° vee.

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 147.0000 •Dimensions - Height: 11.0 Length: 16.5 Width: 15.0

$463.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#VB2 - 1-1/4 x 1-1/4 x 1-5/8'' - V-Block & Clamp Set

Item #: NG49VB2
Manufacturer: Fisher Machine
Mfg #: VB2

Technical Specifications:
•Brand Name: Fisher Machine •Capacity: 1 •Model Number: VB2 •Number of Blocks: 2 •Size: 1-1/4 x 1-1/4 x 1-5/8 •Squareness: .0002 •Type: V-Block & Clamp Set

Description:
•Capacity: Large vee 1 dia. Small vee 1/2 •Hardened and match ground •Square and parallel within .0002 •Two serial numbered vee block with clamps

Shipping Info:
•Actual Weight - 1.5500 •Dimensions - Height: 1.90 Length: 3.20 Width: 3.10

$171.31

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#567 - 1-7/8 x 1-7/8 x 3'' - V-Block & Clamp Set

Item #: MV7052588
Manufacturer: Starrett
Mfg #: 52588

Technical Specifications:
•Brand Name: Starrett •Description: Set Complete, with One V Block and One Clamp •Model Number: 567 •Number of Blocks: 1 •Size: 1-7/8 x 1-7/8 x 3 •Type: V-Block & Clamp Set

Description:
•Can be used on base, end, and flat on either side as clamp is within outside width of block. Clamp is provided with an adjustable side screw with caps to support block and prevent tilting. Groove at stepped end at right angle to base and is handy for holding shouldered studs, round pins, etc. Hole clearance for drilling and remove dowel pins provided. Block has four 3/8-16 tapped holes, two in base and one on each side to attach angle iron. Angle iron holding block can then be attached to lathe face-plate or held by magnetic chuck. Block made of hardened steel. Sides are ground parallel and the groove central and parallel to sides and base. Size 1-7/8 inches square, base length about 3-1/2 inches.

Shipping Info:
•Actual Weight - 2.1500 •Dimensions - Height: 3.70 Length: 6.30 Width: 3.50

$483.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#NVB222I - 2-1/2 x 2 x 2-1/2'' - Single V-Block & Clamp

Item #: NG52NVB222I
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 13/64 to 1-3/16 •Model Number: NVB222I •Number of Blocks: 1 •Size: 2-1/2 x 2 x 2-1/2 •Type: V-Block & Clamp Set

Description:
•Precision made tool steel completely hardened and ground •A reversible swing-away clamp, combined with offset hole pattern, provides a variety of clamping possibilities •Block is slotted on sides to allow easy clamping to any surface

Shipping Info:
•Actual Weight - 3.3000 •Dimensions - Height: 3.60 Length: 3.50 Width: 3.60

$46.40

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#VEB5 - 5 x 3-1/8 x 2'' - Cast Iron V-Block

Item #: NG54VEB5
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 2 •Model Number: VEB5 •Number of Blocks: 2 •Size: 5 x 3-1/8 x 2 •Type: Cast Iron V-Block

Description:
•These vee blocks are manufactured from high quality close-grained gray iron castings seasoned as a precaution against distortion and accurately machined to very close tolerances. •They are supplied in matched pairs, each block having a truly centered 90° vee.

Shipping Info:
•Actual Weight - 9.0000 •Dimensions - Height: 4.10 Length: 6.20 Width: 4.90

$47.15

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#52-475-050 -1-7/8 x 1-7/8 x 3-5/8- Fowler V-Block & Clamp Set

Item #: NA5552475050
Manufacturer: Fowler
Mfg #: 52-475-050

Technical Specifications:
•Brand Name: Fowler •Capacity: 1-5/16 •Model Number: 52-475-050 •Number of Blocks: 1 •Size: 1-7/8 x 1-7/8 x 3-5/8 •Type: V-Block & Clamp Set

Description:
•For grinding, milling, or drilling •Made of hardened and precision groung tool steel •Sides are parallel and vee is central and ground •Central hole is provided for drilling or removing pins •V-Block has four 3/8"-16 tapped holes, two in the bottom andone on each side for angle non-clamping •Dimensions: 3-5/8" long x 1-7/8" wide x 1-7/8" high (including clamp) •Holding capacity: 1-5/16"

Shipping Info:
•Actual Weight - 2.0500 •Dimensions - Height: 2.60 Length: 4.40 Width: 3.20

$108.02

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#VEB7 - 7 x 4-1/2 x 3'' - Cast Iron V-Block

Item #: NG54VEB7
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 3-1/2 •Model Number: VEB7 •Number of Blocks: 2 •Size: 7 x 4-1/2 x 3 •Type: Cast Iron V-Block

Description:
•These vee blocks are manufactured from high quality close-grained gray iron castings seasoned as a precaution against distortion and accurately machined to very close tolerances. •They are supplied in matched pairs, each block having a truly centered 90° vee.

Shipping Info:
•Actual Weight - 25.4500 •Dimensions - Height: 5.60 Length: 7.90 Width: 7.10

$104.40

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#Z1000 - .030 to 9/32" Capacity - Mini-Vee V-Block Accessory Set

Item #: NB75Z1000
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: .030 to 9/32 •Model Number: Z1000 •Squareness: .0002 •Type: V-Block & Clamp Set

Description:
•A unique & universal holding tool for small, miniature or intricate parts used in conjunction with larger V-Blocks (Large V-Block & Clamp not included) •Capacity .030 to 9/32 •Ideal holding fixture for grinding/indexing punches & pins - drilling - milling - EDM - inspection on optical comparators •Furnished with bridges to straddle long workpieces allowing top hold down screw for V-blocks clamp to be utilized •Hardened & high precision ground for squareness and parallelism to within .0002 •Attractive case

Shipping Info:
•Actual Weight - .6000 •Dimensions - Height: 1.40 Length: 6.20 Width: 4.40

$139.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#NVB567 - 1-7/8 x 1-7/8 x 3-1/2'' - V-Block & Clamp Set

Item #: NG52NVB567
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 1-5/16 •Model Number: NVB567 •Number of Blocks: 1 •Size: 1-7/8 x 1-7/8 x 3-1/2 •Type: V-Block & Clamp Set

Description:
•Can be used on base, on end, also flat on either side •Clamp provided with adjustable side screw to prevent tilting when drilling, grinding, or milling.

Shipping Info:
•Actual Weight - 2.6500 •Dimensions - Height: 4.10 Length: 4.90 Width: 3.70

$87.21

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#52-475-010 - 1-5/8 x 1-3/4 x 2-3/4'' - V-Block & Clamp Set

Item #: NG5352475010
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 1-1/2 •Model Number: 52-475-010 •Number of Blocks: 2 •Size: 1-5/8 x 1-3/4 x 2-3/4 •Type: V-Block & Clamp Set

Description:
•All sides are ground square and parallel to each other.Matched accuracy .0002 90° vee s are ground central, parallel, and square with the ends precision ground, matched and numbered in pairs. •Hardened and ground chrome steel •Sold in precision matched pairs only •Compares with other V-Blocks costing twice as much

Shipping Info:
•Actual Weight - 4.4000 •Dimensions - Height: 2.50 Length: 6.20 Width: 4.80

$42.07

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#NVB222 - 2-1/2 x 2 x 2-1/2'' - Pair of V-Blocks & Clamps

Item #: NG52NVB222
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 13/64 to 1-3/16 •Model Number: NVB222 •Number of Blocks: 2 •Size: 2-1/2 x 2 x 2-1/2 •Type: V-Block & Clamp Set

Description:
•Precision made tool steel completely hardened and ground •A reversible swing-away clamp, combined with offset hole pattern, provides a variety of clamping possibilities •Blocks are slotted on sides to allow easy clamping to any surface.

Shipping Info:
•Actual Weight - 6.5500 •Dimensions - Height: 3.60 Length: 6.20 Width: 3.60

$83.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#VEB6 - 6 x 3-1/2 x 2-1/2'' - Cast Iron V-Block

Item #: NG54VEB6
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 3-1/4 •Model Number: VEB6 •Number of Blocks: 2 •Size: 6 x 3-1/2 x 2-1/2 •Type: Cast Iron V-Block

Description:
•These vee blocks are manufactured from high quality close-grained gray iron castings seasoned as a precaution against distortion and accurately machined to very close tolerances. •They are supplied in matched pairs, each block having a truly centered 90° vee.

Shipping Info:
•Actual Weight - 14.1500 •Dimensions - Height: 4.50 Length: 7.00 Width: 5.90

$60.68

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#VEB8 - 8 x 5-1/2 x 4'' - Cast Iron V-Block

Item #: NG54VEB8
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 4 •Model Number: VEB8 •Number of Blocks: 2 •Size: 8 x 5-1/2 x 4 •Type: Cast Iron V-Block

Description:
•These vee blocks are manufactured from high quality close-grained gray iron castings seasoned as a precaution against distortion and accurately machined to very close tolerances. •They are supplied in matched pairs, each block having a truly centered 90° vee.

Shipping Info:
•Actual Weight - 43.8500 •Dimensions - Height: 7.00 Length: 9.00 Width: 9.10

$175.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#NVB334 - 3 x 3 x 4"- Pair of V-Blocks & Clamps

Item #: NG52NVB334
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 9/32 to 1-9/16 •Model Number: NVB334 •Number of Blocks: 2 •Size: 3 x 3 x 4 •Type: V-Block & Clamp Set

Description:
•Precision made tool steel completely hardened and ground •A reversible swing-away clamp, combined with offset hole pattern, provides a variety of clamping possibilities •Blocks are slotted on sides to allow easy clamping to any surface.

Shipping Info:
•Actual Weight - 15.7500 •Dimensions - Height: 5.00 Length: 7.30 Width: 5.20

$155.90

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#52-475-020 - 2-3/4 x 3-1/2 x 4-7/8'' - V-Block & Clamp Set

Item #: NG5352475020
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 2-1/8 •Model Number: 52-475-020 •Number of Blocks: 2 •Size: 2-3/4 x 3-1/2 x 4-7/8 •Type: V-Block & Clamp Set

Description:
•All sides are ground square and parallel to each other. Designed so the clamps do not protrude over the sides; thus the tool can be used on its sides. Matched accuracy .0002 90° vee s are ground central, parallel, and square with the ends precision ground, matched and numbered in pairs. •Hardened and ground chrome steel •Sold in precision matched pairs only •Compares with other V-Blocks costing twice as much

Shipping Info:
•Actual Weight - 21.3500 •Dimensions - Height: 6.80 Length: 6.50 Width: 4.40

$161.75

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It