Email: sales@benchmarktooling.com | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

Industrial Machinery > Milling Machines (ET03) - (2102 Products)

Industrial Machinery > Milling Machines (ET03)
Jet - 1 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, Variable Spindle Speeds, 1.5 hp, 115/230 Volts - Benchmark Tooling

Jet - 1 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, Variable Spindle Speeds, 1.5 hp, 115/230 Volts


Item #: 54657770
Brand: Jet
Model #: 351162
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 19-11/16
Phase 1
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds Variable
Minimum Spindle Speed (RPM) 50.00
Maximum Spindle Speed (RPM) 2500.00
Spindle Travel Length (mm) 107.00
Spindle Travel Length (Inch) 4-1/4
Spindle Travel Length (Decimal Inch) 4.2500
Machine Type Mill Drill Combination
Power Down Feed Yes
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (Inch) 13/16
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 18-1/8
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 230
Overall Length (Inch) 29
Overall Height (Inch) 50
Overall Depth (Inch) 36
Includes Spindle Guard; Work Lamp; Power Down Feed; Newall DP500 DRO

$10,694.94

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 20-1/2" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts - Benchmark Tooling

Jet - 1 Phase, 20-1/2" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts


Item #: 54659586
Brand: Jet
Model #: 351142
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20-1/2
Phase 1
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (mm) 130.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Power Down Feed Yes
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 115/230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 15-3/4
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 115/230
Overall Length (Inch) 28
Overall Height (Inch) 42-1/2
Overall Depth (Inch) 39-1/4
Includes Spindle Guard; Work Lamp; Power Down Feed; Newall DP700 2-Axis DRO

$9,831.25

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 1 Phase, Step Pulley Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 7-1/2" Cross Travel, 12 Spindle Speeds, 1.5 hp, 110/220 Volts - Benchmark Tooling

Value Collection - 1 Phase, Step Pulley Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 7-1/2" Cross Travel, 12 Spindle Speeds, 1.5 hp, 110/220 Volts


Item #: 00685446
Brand: Value Collection
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Step Pulley
Phase 1
Table Length (Inch) 28-3/4
Table Width (Inch) 8-1/4
Longitudinal Travel (Inch) 18-1/8
Cross Travel (Inch) 7-1/2
Number of Spindle Speeds 12
Minimum Spindle Speed (RPM) 125.00
Maximum Spindle Speed (RPM) 3000.00
Spindle Travel Length (mm) 127.00
Spindle Travel Length (Inch) 5
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (mm) 31.75
Drilling Capacity in Steel (Inch) 1-1/4
Drilling Capacity in Cast Iron (mm) 31.75
Drilling Capacity in Cast Iron (Inch) 1-1/4
Tapping Capacity in Steel (mm) 15.88
Tapping Capacity in Steel (Inch) 5/8
Quill Diameter (Decimal Inch) 4.5276
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Decimal Inch) 8.0709
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Head Swivel (Degrees) 360.00
Horsepower (HP) 1.50
Voltage 110/220

$5,737.74

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 20-1/2" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts - Benchmark Tooling

Jet - 1 Phase, 20-1/2" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts


Item #: 54674551
Brand: Jet
Model #: 351146
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20-1/2
Phase 1
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (mm) 130.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Power Down Feed Yes
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 115/230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 15-3/4
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 115/230
Overall Length (Inch) 28
Overall Height (Inch) 42-1/2
Overall Depth (Inch) 39-1/4
Includes Spindle Guard; Work Lamp; Power Down Feed; Newall DP500 DRO

$8,331.73

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Machine - 31-3/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 7" Cross Travel, 12 Spindle Speeds, 2 hp, 230 Volts - Benchmark Tooling

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Machine - 31-3/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 7" Cross Travel, 12 Spindle Speeds, 2 hp, 230 Volts


Item #: 80181639
Brand: Jet
Model #: 350018
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Step Pulley
Swing Distance (Inch) 15-7/8
Phase 1
Table Length (Inch) 31-3/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 7
Number of Spindle Speeds 12
Minimum Spindle Speed (RPM) 150.00
Maximum Spindle Speed (RPM) 3000.00
Spindle Travel Length (Inch) 5
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 18
Table Load Capacity (Lb.) 400.00
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 360.00
Horsepower (HP) 2.00
Voltage 230
Overall Length (Inch) 43
Overall Height (Inch) 44
Overall Depth (Inch) 40
Includes Draw Bar; Work Lamp

$3,616.97

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - Benchmark Tooling

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 42507897
Brand: Rong Fu
Model #: 0954291/4244018
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 1
Table Length (Inch) 28-3/4
Table Width (Inch) 8-1/4
Longitudinal Travel (Inch) 18-1/8
Cross Travel (Inch) 9
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 50.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1180
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (Inch) 38.1000
Drilling Capacity in Steel (Decimal Inch) 1.5000
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Quill Diameter (Decimal Inch) 4.5270
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Inch) 10.2360
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 90.00
Horsepower (HP) 1.00
Voltage 220
Includes AL-500D Power Feed (MSC 41046715); Newall DP500 (MSC 42440180); Stand (MSC 09519919)

$7,473.17

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Enco - 1 Phase, Mill Drill Combination - 37-1/2" Table Length x 28" Table Width, 22" Longitudinal Travel, 8" Cross Travel, 6 Spindle Speeds, 2 hp, 220 Volts - Benchmark Tooling

Enco - 1 Phase, Mill Drill Combination - 37-1/2" Table Length x 28" Table Width, 22" Longitudinal Travel, 8" Cross Travel, 6 Spindle Speeds, 2 hp, 220 Volts


Item #: 51626596
Brand: Enco
Exact Tooling IR#: 04

Features and Benefits

Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Phase 1
Table Length (Inch) 37-1/2
Table Width (Inch) 28
Longitudinal Travel (Inch) 22
Cross Travel (Inch) 8
Number of Spindle Speeds 6
Spindle Travel Length (Inch) 38
Machine Type Mill Drill Combination
Power Down Feed No
Spindle Diameter (Inch) 3
Spindle Taper Size R8
T-Slot Size (Inch) 5/8
Voltage Tolerance +/- 10%
Quill Diameter (Inch) 3
Number of T-Slots 4
T-Slot Size (Inch) 1/2
Head Swivel (Degrees) 90.00
Horsepower (HP) 2
Voltage 220
Overall Height (Inch) 57

$4,702.50

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 20-1/2" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts - Benchmark Tooling

Jet - 1 Phase, 20-1/2" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts


Item #: 54658935
Brand: Jet
Model #: 351145
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20-1/2
Phase 1
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (mm) 130.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Power Down Feed No
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 115/230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 15-3/4
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 115/230
Overall Length (Inch) 28
Overall Height (Inch) 42-1/2
Overall Depth (Inch) 39-1/4
Includes Spindle Guard; Work Lamp; Newall DP500 DRO; X-Axis Powerfeed

$9,382.30

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 3 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, Variable Spindle Speeds, 1.5 hp, 230 Volts - Benchmark Tooling

Jet - 3 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, Variable Spindle Speeds, 1.5 hp, 230 Volts


Item #: 54654157
Brand: Jet
Model #: 351164
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. Three-phase lines provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 19-11/16
Phase 3
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds Variable
Minimum Spindle Speed (RPM) 50.00
Maximum Spindle Speed (RPM) 2500.00
Spindle Travel Length (mm) 107.00
Spindle Travel Length (Inch) 4-1/4
Spindle Travel Length (Decimal Inch) 4.2500
Machine Type Mill Drill Combination
Power Down Feed Yes
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (Inch) 3/4
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 18-1/8
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 230
Overall Length (Inch) 29
Overall Height (Inch) 50
Overall Depth (Inch) 36
Includes Spindle Guard; Work Lamp; Power Down Feed; Newall DP500 DRO

$11,970.73

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 3 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - Benchmark Tooling

Rong Fu - 3 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 09512914
Brand: Rong Fu
Model #: RF-40/3
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. Three-phase lines provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 3
Table Length (Inch) 28-3/4
Table Width (Inch) 8-1/4
Longitudinal Travel (Inch) 18-1/8
Cross Travel (Inch) 9
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 50.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1181
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (mm) 38.10
Drilling Capacity in Steel (Inch) 1-1/2
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Quill Diameter (Decimal Inch) 4.5276
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Decimal Inch) 10.2362
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 90.00
Horsepower (HP) 1.00
Voltage 220

$5,467.39

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 15-7/8" Swing, Variable Speed Pulley Mill Drill Combination - 9-1/2" Table Length x 32-1/4" Table Width, 20-1/2" Longitudinal Travel, 7" Cross Travel, 12 Spindle Speeds, 2 hp, 115/230 Volts - Benchmark Tooling

Jet - 1 Phase, 15-7/8" Swing, Variable Speed Pulley Mill Drill Combination - 9-1/2" Table Length x 32-1/4" Table Width, 20-1/2" Longitudinal Travel, 7" Cross Travel, 12 Spindle Speeds, 2 hp, 115/230 Volts


Item #: 61287777
Brand: Jet
Model #: 350119
Exact Tooling IR#: 04

Features and Benefits

Variable speed pulleys are driven by a V-shaped belt system and a variable speed assembly that regulates an infinite speed range change by the turn of a dial.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Variable Speed Pulley
Swing Distance (Inch) 15-7/8
Phase 1
Table Length (Inch) 9-1/2
Table Width (Inch) 32-1/4
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 7
Number of Spindle Speeds 12
Minimum Spindle Speed (RPM) 150.00
Maximum Spindle Speed (RPM) 3000.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Spindle Diameter (Inch) 1.8120
Spindle Taper Size R8
Drilling Capacity in Cast Iron (Inch) 1-1/4
Quill Diameter (Inch) 3
Horsepower (HP) 2
Voltage 115/230

$5,415.55

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 3 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, Variable Spindle Speeds, 1.5 hp, 230 Volts - Benchmark Tooling

Jet - 3 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, Variable Spindle Speeds, 1.5 hp, 230 Volts


Item #: 54654165
Brand: Jet
Model #: 351151
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. Three-phase lines provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 19-11/16
Phase 3
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds Variable
Minimum Spindle Speed (RPM) 50.00
Maximum Spindle Speed (RPM) 2500.00
Spindle Travel Length (mm) 107.00
Spindle Travel Length (Inch) 4-1/4
Spindle Travel Length (Decimal Inch) 4.2500
Machine Type Mill Drill Combination
Power Down Feed No
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (Inch) 13/16
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 18-1/8
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 230
Overall Length (Inch) 29
Overall Height (Inch) 50
Overall Depth (Inch) 36
Includes Spindle Guard; Work Lamp; Newall DP700 2-Axis DRO; X-Axis Powerfeed

$11,502.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Brand: Race Sport / Part #: 1007561

Brand: Race Sport / Part #: 1007561


Item #: 82278193
Brand: Race Sport
Model #: 1007561

Product Specifications

Light Type Auxiliary Light
Amperage Rating 1.4000
Light Technology LED
Color White; Amber
Wattage 40.000
Material Aluminum
Voltage 12 to 24 VDC
Standards Prop 65 WARNING
Additional Information Lumens: 3500 lm; Package Quantity: 2/Pack; Mounting Style: Flush; Chip Type: CREE; Beam Pattern: Combo; ColorTemperature: 6500K; IP Rating: IP67; Features: Amber Side Strobe Profession Grade with Amber Fog Cutting Lens

$0.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 20-1/2" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts - Benchmark Tooling

Jet - 1 Phase, 20-1/2" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts


Item #: 54654363
Brand: Jet
Model #: 351144
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20-1/2
Phase 1
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (mm) 130.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Power Down Feed No
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 115/230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 15-3/4
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 115/230
Overall Length (Inch) 28
Overall Height (Inch) 42-1/2
Overall Depth (Inch) 39-1/4
Includes Spindle Guard; Work Lamp; Newall DP500 DRO

$7,597.91

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 15-7/8" Swing, Variable Speed Pulley Mill Drill Combination - 9-1/2" Table Length x 32-1/4" Table Width, 20-1/2" Longitudinal Travel, 7" Cross Travel, 12 Spindle Speeds, 2 hp, 230 Volts - Benchmark Tooling

Jet - 1 Phase, 15-7/8" Swing, Variable Speed Pulley Mill Drill Combination - 9-1/2" Table Length x 32-1/4" Table Width, 20-1/2" Longitudinal Travel, 7" Cross Travel, 12 Spindle Speeds, 2 hp, 230 Volts


Item #: 51211878
Brand: Jet
Model #: 350129
Exact Tooling IR#: 04

Features and Benefits

Variable speed pulleys are driven by a V-shaped belt system and a variable speed assembly that regulates an infinite speed range change by the turn of a dial.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Variable Speed Pulley
Swing Distance (Inch) 15-7/8
Phase 1
Table Length (Inch) 9-1/2
Table Width (Inch) 32-1/4
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 7
Number of Spindle Speeds 12
Minimum Spindle Speed (RPM) 150.00
Maximum Spindle Speed (RPM) 3000.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Spindle Diameter (Inch) 1.8120
Spindle Taper Size R8
Drilling Capacity in Cast Iron (Inch) 1-1/4
Quill Diameter (Inch) 3
Horsepower (HP) 2
Voltage 230

$9,041.14

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 3 Phase, 16-3/8" Swing, Step Pulley Mill Drill Machine - 28-1/2" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 6-1/4" Cross Travel, 12 Spindle Speeds, 1 hp, 230 Volts - Benchmark Tooling

Rong Fu - 3 Phase, 16-3/8" Swing, Step Pulley Mill Drill Machine - 28-1/2" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 6-1/4" Cross Travel, 12 Spindle Speeds, 1 hp, 230 Volts


Item #: 01241512
Brand: Rong Fu
Model #: ***BDS ITEM***
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. Three-phase lines provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Step Pulley
Swing Distance (Inch) 16-3/8
Phase 3
Table Length (Inch) 28-1/2
Table Width (Inch) 8-1/4
Longitudinal Travel (Inch) 18-1/8
Cross Travel (Inch) 6-1/4
Number of Spindle Speeds 12
Minimum Spindle Speed (RPM) 120.00
Maximum Spindle Speed (RPM) 2500.00
Spindle Taper Size R8
Horsepower (HP) 1.00
Voltage 230
Includes Stand (MSC 09519919)

$3,382.61

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 3 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, Variable Spindle Speeds, 1.5 hp, 230 Volts - Benchmark Tooling

Jet - 3 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, Variable Spindle Speeds, 1.5 hp, 230 Volts


Item #: 54676309
Brand: Jet
Model #: 351155
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. Three-phase lines provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 19-11/16
Phase 3
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds Variable
Minimum Spindle Speed (RPM) 50.00
Maximum Spindle Speed (RPM) 2500.00
Spindle Travel Length (mm) 107.00
Spindle Travel Length (Inch) 4-1/4
Spindle Travel Length (Decimal Inch) 4.2500
Machine Type Mill Drill Combination
Power Down Feed Yes
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (Inch) 13/16
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 18-1/8
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 230
Overall Length (Inch) 29
Overall Height (Inch) 50
Overall Depth (Inch) 36
Includes Spindle Guard; Work Lamp; Power Down Feed; Newall DP700 2-Axis DRO; X-Axis Powerfeed

$12,415.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 14-1/2" Swing, Step Pulley Mill Drill Combination - 7-1/2" Table Length x 23" Table Width, 14" Longitudinal Travel, 6" Cross Travel, 12 Spindle Speeds, 1 hp, 115/230 Volts - Benchmark Tooling

Jet - 1 Phase, 14-1/2" Swing, Step Pulley Mill Drill Combination - 7-1/2" Table Length x 23" Table Width, 14" Longitudinal Travel, 6" Cross Travel, 12 Spindle Speeds, 1 hp, 115/230 Volts


Item #: 69631497
Brand: Jet
Model #: 350116
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Step Pulley
Swing Distance (Inch) 14-1/2
Phase 1
Table Length (Inch) 7-1/2
Table Width (Inch) 23
Longitudinal Travel (Inch) 14
Cross Travel (Inch) 6
Number of Spindle Speeds 12
Minimum Spindle Speed (RPM) 110.00
Maximum Spindle Speed (RPM) 2580.00
Spindle Travel Length (Inch) 3-1/2
Spindle Travel Length (Decimal Inch) 3.5000
Machine Type Mill Drill Combination
Spindle Diameter (Inch) 1.8120
Spindle Taper Size R8
Drilling Capacity in Cast Iron (Inch) 1
Quill Diameter (Inch) 2-7/16
Horsepower (HP) 1.00
Voltage 115/230

$5,862.40

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 14-1/2" Swing, Step Pulley Mill Drill Machine - 23" Table Length x 7-1/2" Table Width, 14" Longitudinal Travel, 5-1/2" Cross Travel, 12 Spindle Speeds, 1 hp, 115/230 Volts - Benchmark Tooling

Jet - 1 Phase, 14-1/2" Swing, Step Pulley Mill Drill Machine - 23" Table Length x 7-1/2" Table Width, 14" Longitudinal Travel, 5-1/2" Cross Travel, 12 Spindle Speeds, 1 hp, 115/230 Volts


Item #: 80181555
Brand: Jet
Model #: 350017
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Step Pulley
Swing Distance (Inch) 14-1/2
Phase 1
Table Length (Inch) 23
Table Width (Inch) 7-1/2
Longitudinal Travel (Inch) 14
Cross Travel (Inch) 5-1/2
Number of Spindle Speeds 12
Minimum Spindle Speed (RPM) 110.00
Maximum Spindle Speed (RPM) 2580.00
Spindle Travel Length (Inch) 3-1/2
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1
Quill Diameter (Inch) 2-7/16
Maximum Spindle to Table Distance (Inch) 15
Maximum Spindle To Column Distance (Inch) 7-1/4
Number of T-Slots 4
T-Slot Size (Inch) 9/16
Head Swivel (Degrees) 360.00
Horsepower (HP) 1.00
Voltage 115/230; 115
Overall Length (Inch) 38
Overall Height (Inch) 42
Overall Depth (Inch) 37-1/2

$2,832.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 14-1/2" Swing, Step Pulley Mill Drill Combination - 23" Table Length x 7-1/2" Table Width, 14" Longitudinal Travel, 1 hp, 115/230 Volts - Benchmark Tooling

Jet - 1 Phase, 14-1/2" Swing, Step Pulley Mill Drill Combination - 23" Table Length x 7-1/2" Table Width, 14" Longitudinal Travel, 1 hp, 115/230 Volts


Item #: 35295237
Brand: Jet
Model #: 350132
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Step Pulley
Swing Distance (Inch) 14-1/2
Phase 1
Table Length (Inch) 23
Table Width (Inch) 7-1/2
Longitudinal Travel (Inch) 14
Minimum Spindle Speed (RPM) 110.00
Maximum Spindle Speed (RPM) 2500.00
Machine Type Mill Drill Combination
Power Down Feed No
Spindle Taper Size R8
Voltage Tolerance 115/230
Quill Diameter (Inch) 2-7/16
Maximum Spindle to Table Distance (Inch) 15
Number of T-Slots 4
T-Slot Size (Inch) 9/16
Horsepower (HP) 1.00
Voltage 115/230
Overall Length (Decimal Inch) 38.0000
Overall Height (Inch) 37-1/2
Overall Depth (Inch) 42
Includes Mill Drill; Newall DP500 DRO

$5,086.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It