Holemaking > Drilling & Drill Bits (ET04) - (135081 Products)
.078-2FL-SE-REG-.015R
Item #: MW212505207815
Brand: Monster Tool Company
Model #: 250-5207815
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.078″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.015″ |
| Depth of Cut Maximum (APMX) | 0.234″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.078″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.078-2FL-SE-REG-.015R AlTiN
Item #: MW212505207815B
Brand: Monster Tool Company
Model #: 250-5207815B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.078″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.015″ |
| Depth of Cut Maximum (APMX) | 0.234″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.078″ |
| Coating | AlTiN |
| Series/List # | 250 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.2655 ST FL RHC REAMER
Item #: MW205000002655
Brand: Monster Tool Company
Model #: 500-0002655
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.2655″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.2655″ |
| Decimal Equivalent | 0.2655″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 3-1/4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 3/4″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.2661 ST FL RHC REAMER
Item #: MW205000002661
Brand: Monster Tool Company
Model #: 500-0002661
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.2661″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.2661″ |
| Decimal Equivalent | 0.2661″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 3-1/4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 3/4″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
16 × 36 2-Axis Milling Package
Item #: MS331636XXBK1
Brand: Newall
Model #: N803616XXM1012
| Product Specifications | |
|---|---|
| Type | Digital Readout System |
| Y-Axis Stage Travel | 36″ |
| X-Axis Stage Travel | 16″ |
| Machine Compatibility | Milling Applications |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5″ Bore Diameter × 6″ Hone Length × 17.5″ Overall Length, 1000/1200 Grit, Levigated Alumina - Heavy Duty Flex-Hone
Item #: MJ73GBD500LA
Brand: Brush Research
Model #: GBD500LA
| Product Specifications | |
|---|---|
| Type | Heavy Duty Flex-Hone |
| Hone Length | 6″ |
| Abrasive Material | Levigated Alumina |
| Overall Length | 17.5″ |
| Grit | 1000/1200 |
| Specification | Final Polish |
| Bore Diameter | 5″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
6 mm Bore Diameter × 1 1/2″ Hone Length × 8″ Overall Length, 800 Grit, Silicon Carbide - Standard Duty Flex-Hone
Item #: MJ73BC6M800
Brand: Brush Research
Model #: BC6M800
| Product Specifications | |
|---|---|
| Type | Standard Duty Flex-Hone |
| Hone Length | 1 1/2″ |
| Abrasive Material | Silicon Carbide |
| Overall Length | 8″ |
| Grit | 800 |
| Specification | Ferrous Materials |
| Bore Diameter | 6 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5″ Bore Diameter × 6″ Hone Length × 17.5″ Overall Length, 60 Grit, Zirconia Alumina #1525 - Heavy Duty Flex-Hone
Item #: MJ73GBD50060Z25
Brand: Brush Research
Model #: GBD50060Z25
| Product Specifications | |
|---|---|
| Type | Heavy Duty Flex-Hone |
| Hone Length | 6″ |
| Abrasive Material | Zirconia Alumina #1525 |
| Overall Length | 17.5″ |
| Grit | 60 |
| Specification | Ferrous Materials - Maximum Life |
| Bore Diameter | 5″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5.5 mm Bore Diameter × 1 1/2″ Hone Length × 8″ Overall Length, 320 Grit, Aluminum Oxide - Standard Duty Flex-Hone
Item #: MJ73BC55M320AO
Brand: Brush Research
Model #: BC55M320AO
| Product Specifications | |
|---|---|
| Type | Standard Duty Flex-Hone |
| Hone Length | 1 1/2″ |
| Abrasive Material | Aluminum Oxide |
| Overall Length | 8″ |
| Grit | 320 |
| Specification | Non-ferrous Materials |
| Bore Diameter | 5.5 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 4144486
Item #: 99309049
Brand: Widia
Model #: 4144486Product Specifications
Drill Bit Size (mm)
15.30
Tool Material
Solid Carbide
Cutting Direction
Right Hand
Coating/Finish
TiAlN
Drill Point Angle
140
Spiral Type
Regular Spiral
Flute Type
Helical
Point Type
Thinned
Coolant Through
No
Shank Type
Cylindrical
Number Of Flutes
2
Drill Tip Finish/Coating
TiAlN
Overall Length (mm)
115.0000
Shank Diameter (mm)
16.0000
Series
VDS201A
Web Thinning
Web-Thinned
Drill Length Type
Screw Machine Length
Maximum Drilling Depth (mm)
45.00
Shank Length (mm)
48.000
Drill Point Length (mm)
2.64
Flute By Diameter Ratio
3xD
Tool Performance
General Purpose
Drill Bit Diameter Tolerance
-0.018/0.000 mm
Flute Length (mm)
65.00
Drill Bit Grade
General Purpose
Material Grade
Carbide
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
254.16-8DIN ER16 SS RIGID
Item #: TG62254168DIN
Brand: Techniks
Model #: 254.16-8DIN
| Product Specifications | |
|---|---|
| Connection Diameter Workpiece Side (DCONWS) | 8 mm |
| Shank Size (SS) | ER16 |
| Connection Diameter Minimum Workpiece Side (DCONNWS) | 8 mm |
| Tool Type | Collet |
| Connection Diameter Maximum Workpiece Side (DCONXWS) | 8 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 4144484
Item #: 99308983
Brand: Widia
Model #: 4144484Product Specifications
Drill Bit Size (mm)
15.10
Tool Material
Solid Carbide
Cutting Direction
Right Hand
Coating/Finish
TiAlN
Drill Point Angle
140
Spiral Type
Regular Spiral
Flute Type
Helical
Point Type
Thinned
Coolant Through
No
Shank Type
Cylindrical
Number Of Flutes
2
Drill Tip Finish/Coating
TiAlN
Overall Length (mm)
115.0000
Shank Diameter (mm)
16.0000
Series
VDS201A
Web Thinning
Web-Thinned
Drill Length Type
Screw Machine Length
Maximum Drilling Depth (mm)
45.00
Shank Length (mm)
48.000
Drill Point Length (mm)
2.61
Flute By Diameter Ratio
3xD
Tool Performance
General Purpose
Drill Bit Diameter Tolerance
-0.018/0.000 mm
Flute Length (mm)
65.00
Drill Bit Grade
General Purpose
Material Grade
Carbide
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4-82° 4FL DE CARB CNSK w/ DRILL PT
Item #: MW18334308060
Brand: Monster Tool Company
Model #: 334-308060
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 3-1/2″ |
| Angle | 41 Degrees |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Series/List # | 334 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 82 Degrees |
| End Shape | Drill Point |
| Coating | Bright |
| Single / Double End | Double End |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.75″ |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Super-Alloys / Titanium |
| Application | Countersinking |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
04542-03 ER 11 - 3MM STEE
Item #: TG620454203
Brand: Techniks
Model #: 04542-03
| Product Specifications | |
|---|---|
| Connection Diameter Workpiece Side (DCONWS) | 3 mm |
| Shank Size (SS) | ER11 |
| Connection Diameter Minimum Workpiece Side (DCONNWS) | 2.5 mm |
| Tool Type | Collet |
| Connection Diameter Maximum Workpiece Side (DCONXWS) | 3 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
15/64x5/16 INT. GRIND TOOL
Item #: MW17312708235
Brand: Monster Tool Company
Model #: 312-708235
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 15/64″ |
| Usable Length (LU) | 5/16″ |
| Depth of Cut Maximum (APMX) | 5/16″ |
| Tool Type | Grind Tool |
| Overall Length (OAL) | 2″ |
| Series/List # | 312 |
| Flute Count (NOF) | Diamond Cut |
| Cutting Direction (HAND) | Right Hand |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Decimal Equivalent | 0.2344″ |
| Coating | Bright |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Neck Length (LN) | 3/4″ |
| End Shape | End Cut |
| Single / Double End | Single End |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.110-2FL-SE-STUB-BALL
Item #: MW21250360820
Brand: Monster Tool Company
Model #: 250-360820
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.11″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 0.165″ |
| Length Group | Stub |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.11″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT50X3/4″ SRNK FITHOLDR
Item #: TE1229064FB
Brand: Techniks
Model #: 29064FB
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | CAT50 |
| Body Diameter (BD) | 1.65″ |
| Connection Diameter Workpiece Side (DCONWS) | 3/4″ |
| Overall Length (OAL) | 4.13″ |
| Shank Size (SS) | CAT50 |
| Shank Type | CAT50 |
| Body Length (LB) | 4.13″ |
| Tool Type | Shrinkfit Holder |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5.7 mm Dia. × 6 mm Shank Dia. × 248 mm OAL, 140 Degrees, 30xD, 2 Flutes, Aqua Revo D, Solid Carbide Drills
Item #: AC880732391
Brand: Nachi America Inc
Model #: 0732391
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 5.7 mm |
| Functional Length (LF) | 198 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 5.7 mm |
| Tool Type | Drill |
| Length Group | 30xD |
| Usable Length (LU) | 200 mm |
| Coating | Aqua Revo D |
| Overall Length (OAL) | 248 mm |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 140 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
6 mm Bore Diameter × 1 1/2″ Hone Length × 8″ Overall Length, 180 Grit, Boron Carbide - Standard Duty Flex-Hone
Item #: MJ73BC6M180BC
Brand: Brush Research
Model #: BC6M180BC
| Product Specifications | |
|---|---|
| Type | Standard Duty Flex-Hone |
| Hone Length | 1 1/2″ |
| Abrasive Material | Boron Carbide |
| Overall Length | 8″ |
| Grit | 180 |
| Specification | Tough Ferrous Materials |
| Bore Diameter | 6 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.062-2FL-SE-STUB-.015R AlTiN
Item #: MW212506206215B
Brand: Monster Tool Company
Model #: 250-6206215B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.062″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.015″ |
| Depth of Cut Maximum (APMX) | 0.093″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Stub |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.062″ |
| Coating | AlTiN |
| Series/List # | 250 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It