Hardware > Locks (ET04) - (8526 Products)
#2/0 Dia. × 5/32″ Shank Dia. × 2-9/16″ OAL, 4 Flutes, HSS, Uncoated, Taper Pin Reamer
Item #: TA15TR97551
Brand: Titan USA
Model #: TR97551
| Product Specifications | |
|---|---|
| Tool Type | Taper Pin Reamer |
| Cutting Edge Length (L) | 1-9/16″ |
| Size | #2/0 |
| Large End Diameter | 0.1462″ |
| Length Chip Flute (LCF) | 1-9/16″ |
| Small End Diameter | 0.1137″ |
| Flute Count (NOF) | 4 |
| Cutting Edge Material | HSS |
| Overall Length (OAL) | 2-9/16″ |
| Coating | Uncoated |
| Connection Diameter Machine Side (DCONMS) | 5/32″ |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Chucking Reamer; 0.231″ Dia. × 0.231″ Shank Dia. × 3″ OAL, 4 Flutes, Carbide, Uncoated
Item #: TA15TC87288
Brand: Titan USA
Model #: TC87288
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.231″ |
| Overall Length (OAL) | 3″ |
| Usable Length (LU) | 1-3/4″ |
| Coating | Uncoated |
| Cutting Edge Length (L) | 1″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 0.231″ |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Tool Type | Reamer |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
6 mm Bore Diameter × 1 1/2″ Hone Length × 8″ Overall Length, 800 Grit, Aluminum Oxide - Standard Duty Flex-Hone
Item #: MJ73BC6M800AO
Brand: Brush Research
Model #: BC6M800AO
| Product Specifications | |
|---|---|
| Type | Standard Duty Flex-Hone |
| Hone Length | 1 1/2″ |
| Abrasive Material | Aluminum Oxide |
| Overall Length | 8″ |
| Grit | 800 |
| Specification | Non-ferrous Materials |
| Bore Diameter | 6 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.0392 ST FL RHC REAMER
Item #: MW205000000392
Brand: Monster Tool Company
Model #: 500-0000392
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.0392″ |
| Cutting Edge Material | Solid Tungsten Carbide |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Measurement Type | Inch |
| Usable Length (LU) | 1/4″ |
| Series/List # | 500 |
| Cutting Edge Length (L) | 1/4″ |
| Tool Type | Reamer |
| Connection Diameter Machine Side (DCONMS) | 0.0327″ |
| Decimal Equivalent | 0.0392″ |
| Flute Count (NOF) | 4 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 1-1/2″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Cutting Direction (HAND) | Right Hand |
| Single / Double End | Single End |
| Grade | C-2 Sub-Micron |
| Length Group | Regular |
| Coating | Bright |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.040-2FL-SE-REG
Item #: MW21250100150
Brand: Monster Tool Company
Model #: 250-100150
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.04″ |
| Applicable Material | | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 0.12″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.04″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4703 ST FL RHC REAMER
Item #: MW205000004703
Brand: Monster Tool Company
Model #: 500-0004703
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.4703″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-3/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-3/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.4703″ |
| Decimal Equivalent | 0.4703″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
M27x2 - 6h Ring Gage - Go
Item #: ER45L2005010471
Brand: EMUGE-FRANKEN
Model #: L0200501.0471
| Product Specifications | |
|---|---|
| Type | Thread Ring Gage |
| Thread Type | Metric |
| Go / No Go | Go |
| Certification | Short form certification included |
| Thread Size | M27x2 |
| Pitch | 2 |
| Classification | 6H |
| Dimension Standards | DIN ISO 1502 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
DNA DEAD NUTS ER
Item #: TE1205992
Brand: Techniks
Model #: 05992
| Product Specifications | |
|---|---|
| Diameter Lock Nut (DLN) | 50 mm |
| Tool Type | Collet Nut |
| Lock Nut Height (HLN) | 22 mm |
| Collet Size | DNA32 |
| Connection Thread Nominal Size Machine Side (THSZMS) | M40x1.5 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/16-2FL-SE-LG 1-1/8x3 AlTiN
Item #: MW21213001033
Brand: Monster Tool Company
Model #: 213-001033
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Applicable Material | | Stainless Steel | Cast Iron | |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 1-1/8″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 3″ |
| Length Group | Long |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.3125″ |
| Coating | AlTiN |
| Series/List # | 213 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
78000104 HDPE, Can Liner, 40X46, 40/45 gallon, 22 MIC, Natural, Roll
Item #: RC0178000104
Brand: Right Choice
Model #: 78000104
| Product Specifications | |
|---|---|
| Type | Roll - Liners |
| Height | 40″ |
| Material | High Density |
| Width | 46″ |
| Capacity | 40-45 gallon |
| Bag Closure Type | No Closure |
| Thickness | 22 MIC |
| PackSize | 1.00 |
| Color | Natural |
| Standard Pack | 100 per case |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Chucking Reamer; 0.056″ Dia. × 0.056″ Shank Dia. × 1-1/2″ OAL, 4 Flutes, Carbide, Uncoated
Item #: TA15TC87064
Brand: Titan USA
Model #: TC87064
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.056″ |
| Overall Length (OAL) | 1-1/2″ |
| Usable Length (LU) | 3/4″ |
| Coating | Uncoated |
| Cutting Edge Length (L) | 3/8″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 0.056″ |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Tool Type | Reamer |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
19/64-4FL-SE-REG TiN
Item #: MW21206001145
Brand: Monster Tool Company
Model #: 206-001145
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 19/64″ |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Application | | Slotting | Profiling | Rampdown | |
| Depth of Cut Maximum (APMX) | 13/16″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.2969″ |
| Coating | TiN |
| Series/List # | 206 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
05335 2.5 3F 0.5R ENDMILL
Item #: DD9005335
Brand: KYOCERA SGS Precision Tools
Model #: 05335
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 2.5 mm |
| Neck Diameter (DN) | 0.0925″ |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Tool Type | Solid Carbide Endmill |
| Depth of Cut Maximum (APMX) | 4 mm |
| Flute Type | Spiral |
| Overall Length (OAL) | 63.5 mm |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | AlTiN |
| Series/List # | M032 |
| Flute Count (NOF) | 3 |
| Shank Size (SS) | 0.2362″ |
| Flute Helix Angle (FHA) | 45 Degrees |
| Shank Length (LS) | 2.342″ |
| Shank Type | Round |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.0197″ |
| End Shape | Corner Radius |
| Cutting Direction (HAND) | Right Hand |
| Usable Length (LU) | 0.1575″ |
| Single / Double End | Single End |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | Other Non-Metallic Materials | |
| Center Cutting | Yes |
| Corner Radius (RE) | 0.0197″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
05341 2.5 3F 0.2R ENDMILL
Item #: DD9005341
Brand: KYOCERA SGS Precision Tools
Model #: 05341
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 2.5 mm |
| Neck Diameter (DN) | 0.0925″ |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Neck Length (LN) | 1.1811″ |
| Depth of Cut Maximum (APMX) | 7.5 mm |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 63.5 mm |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | AlTiN |
| Body Material | Carbide |
| Flute Count (NOF) | 3 |
| Series/List # | M032 |
| Flute Helix Angle (FHA) | 45 Degrees |
| Shank Size (SS) | 0.2362″ |
| Shank Type | Round |
| Shank Length (LS) | 1.0236″ |
| End Shape | Corner Radius |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.0079″ |
| Usable Length (LU) | 0.2953″ |
| Cutting Direction (HAND) | Right Hand |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | Other Non-Metallic Materials | |
| Single / Double End | Single End |
| Corner Radius (RE) | 0.0079″ |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2 OD - 3/16 ID Sleeve
Item #: TG2019472316
Brand: Techniks
Model #: 19472-3/16
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Shank Type | Straight Shank |
| Connection Diameter Workpiece Side (DCONWS) | 1/2″ |
| Shank Size (SS) | 1/2″ |
| Body Diameter (BD) | 3/16″ |
| Tool Type | Hydraulic Sleeve |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 3/64″ Dia. × 0.071″ LOC × 1/8″ Shank Dia. × 1-1/2″ OAL, 2 FL, Carbide, AlTiN
Item #: TA15TC53247
Brand: Titan USA
Model #: TC53247
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/64″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 0.071″ |
| Depth of Cut Maximum (APMX) | 0.071″ |
| Corner Radius (RE) | 0.0235″ |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.0469″ |
| Coating | TiAlN |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It