4" OAL, Steel

Item #: 85245934
Brand: Proto
Model #: J2620SW
Exact Tooling IR#: 04

Features and Benefits

Striking box wrenches are short, thick and designed to loosen or tighten large fasteners by the striking of a hammer. The hammer hits the wrench on the flat or anvil area for this operation.

Non-ratcheting wrenches must disengage and re-engage from the fastener to loosen or tighten.

Single end wrenches are designed with one working end.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Striking
Style	Nonratcheting
Size (Inch)	1-1/4
Number of Points	12
Head Type	Single End
Additional Information	Offset
Overall Length (Inch)	10-3/4
Material	Steel
Head Diameter (Inch)	1-7/8
Head Thickness (Inch)	13/16
PSC Code	5120

Product Specifications

Wrench Type Striking

Style Nonratcheting

Size (Inch) 1-1/4

Number of Points 12

Head Type Single End

Additional Information Offset

Overall Length (Inch) 10-3/4

Material Steel

Head Diameter (Inch) 1-7/8

Head Thickness (Inch) 13/16

PSC Code 5120

$69.48

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 5/8" x 3/4" Standard Open End Wrench - 8-43/64" OAL, Double End, Black Finish, 15° Head Angle

Item #: 02459972
Brand: Proto
Model #: J3031B
Exact Tooling IR#: 04

Features and Benefits

Open end wrenches are used for tightening or loosening fasteners. They are designed with an offset opening and are available in both single or double end options.

Standard wrenches engage and disengage with a fastener when either loosening or tightening.

Black finishes are oil-based and are non-reflective, corrosion-resistant and visually distinctive.

Double end wrenches are designed with two working ends which may be the same or different sizes.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Open End Wrench
Style	Standard
Size (Inch)	5/8 x 3/4
Finish/Coating	Black
Head Type	Double End
Overall Length (Inch)	8-43/64
Head Angle	15
Warranty	Mfr's Lifetime Warranty
Material	Steel
PSC Code	5120

Product Specifications

Wrench Type Open End Wrench

Style Standard

Size (Inch) 5/8 x 3/4

Finish/Coating Black

Head Type Double End

Overall Length (Inch) 8-43/64

Head Angle 15

Warranty Mfr's Lifetime Warranty

Material Steel

PSC Code 5120

$16.89

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 9mm 6 Point 3/8" Drive Chrome Flare Nut Crowfoot Wrench - 29/32" Head Diam x 1/4" Head Thickness, 1-5/16" OAL

Item #: 71326581
Brand: Proto
Model #: J4909MHFL
Exact Tooling IR#: 04

Product Specifications
Style	Flare Nut Crowfoot Wrench
System of Measurement	Metric
Drive Size (Inch)	3/8
Size (mm)	9
Finish/Coating	Chrome
Number of Points	6
Overall Length (Inch)	1-5/16
ASME Spec	ASME B107.21
Federal Spec	GGG-C-1507b
Head Diameter (Inch)	29/32
Head Thickness (Inch)	1/4
Warranty	Mfr's Limited Lifetime Warranty
PSC Code	5120

$24.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Facom - Socket Wrenches PSC Code: 5120

Item #: 59587337
Brand: Facom
Model #: 76.36
Exact Tooling IR#: 04

Product Specifications

Socket Wrenches; PSC Code: 5120

PSC Code 5120

$91.58

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Turning Insert: SNMA432 UTI20T, Carbide

Item #: 02999001
Brand: Mitsubishi
Model #: 105201

Product Specifications

ANSI Insert Code SNMA432

ISO Insert Code SNMA120408

Relief Angle 0

Insert Style SNMA

Corner Radius (mm) 0.80

Corner Radius (Inch) 1/32

Corner Radius (Decimal Inch) 0.0312

Included Angle 90

Manufacturer Grade UTI20T

Coating/Finish Bright/Uncoated

Insert Hand Neutral

Insert Thickness (Inch) 3/16

Insert Thickness 4.76

Insert Thickness (Decimal Inch) 0.1875

Inscribed Circle (Decimal Inch) 0.5000

Inscribed Circle (Inch) 1/2

Inscribed Circle (mm) 12.70

Insert Material Carbide

Insert Shape S - Square

Grade Characteristics Cast Iron (K) - Moderate Wear-Resistance and Toughness to High Toughness; Steel (P) - Moderate Wear-Resistance and Toughness to High Toughness; Stainless Steel (M) - Moderate Wear-Resistance and Toughness to High Toughness

Side Clearance Negative

Number Of Cutting Edges 8

Insert Shape Code S

Clearance Code N

Tolerance Code M

Primary Workpiece Material Code P; K; M

Chip Breaker Flat Top

ANSI Size Code 432

ISO Size Code 120408

UNSPSC Code 23242105

Insert Size Code 4

$11.44

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ridgid - 14" Aluminum Straight Pipe Wrench - 2" Pipe Capacity

Item #: 74779802
Brand: Ridgid
Model #: 31095
Exact Tooling IR#: 04

Product Specifications
Type	Straight Pipe Wrench
Maximum Pipe Capacity (Inch)	2
Overall Length (Inch)	14
Material	Aluminum
PSC Code	5120

$81.15

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ampco - 13/32", 6 Point, 90 ° Offset Socket Wrench

Item #: 92718089
Brand: Ampco
Model #: SL-13/32
Exact Tooling IR#: 04

Product Specifications

13/32", 6 Point, 90 ° Offset Socket Wrench -

Tool Type 90 Degree Offset Socket Wrench

Number of Points 6

System of Measurement Inch

Size (Inch) 13/32

Finish/Coating None

Warranty Mfr's Limited Lifetime Warranty

PSC Code 5120

$266.12

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CDI - Torque Wrench Calibration Weight - For Use with CDI Torque Transducers

Item #: 59035469
Brand: CDI
Model #: 2000-304-0
Exact Tooling IR#: 04

Product Specifications
Tool Type	Calibration Weight
For Use With	CDI Torque Transducers
PSC Code	5120

$2,392.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 14mm Open End Torque Wrench Interchangeable Head - 695 In/Lb Max Torque, Use with Proto Torque Wrenches

Item #: 45139094
Brand: Proto
Model #: JH5-14M
Exact Tooling IR#: 04

Product Specifications
Head Type	Open End
Size (mm)	14
Maximum Torque (In/Lb)	695
For Use With	Proto Torque Wrench
PSC Code	5120

$67.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 9/16" 6 Point 3/8" Drive Chrome Flare Nut Crowfoot Wrench - 1-1/4" Head Diam x 1/4" Head Thickness, 1.63" OAL

Item #: 39939855
Brand: Proto
Model #: J4918HFL
Exact Tooling IR#: 04

Product Specifications
Style	Flare Nut Crowfoot Wrench
System of Measurement	Inch
Drive Size (Inch)	3/8
Size (Inch)	9/16
Finish/Coating	Chrome
Number of Points	6
Overall Length (Decimal Inch)	1.63
ASME Spec	ASME B107.21
Federal Spec	GGG-C-1507b
Head Diameter (Inch)	1-1/4
Head Thickness (Inch)	1/4
Warranty	Mfr's Limited Lifetime Warranty
PSC Code	5120

$33.03

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ampco - 34mm Nonsparking Standard Striking Open End Wrench - Single End, Plain Finish

Item #: 92751643
Brand: Ampco
Model #: WSO-34
Exact Tooling IR#: 04

Features and Benefits

Striking wrenches are designed to loosen or tighten fasteners with the force from the striking of a hammer on a flat surface.

Non-sparking box wrenches used in environments where flammable or combustible elements are present.

Standard wrenches engage and disengage with a fastener when either loosening or tightening.

Plain, uncoated tools do not have a finish or coating.

Single end wrenches are designed with one working end.

Aluminum bronze offers non-sparking, non-magnetic and corrosion-resistant properties and is ideal for use where flammable or combustible elements are present.

Product Specifications
Wrench Type	Striking
Style	Non-Sparking
Style	Standard
Size (mm)	34.00
Finish/Coating	Plain
Head Type	Single End
Material	Aluminum Bronze
PSC Code	5120

Product Specifications

Wrench Type Striking

Style Non-Sparking

Style Standard

Size (mm) 34.00

Finish/Coating Plain

Head Type Single End

Material Aluminum Bronze

PSC Code 5120

$264.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

GearWrench - 6 Piece, 9mm x 11mm to 19mm x 21mm, 6 Point Flare Nut Wrench Set - Metric Measurement Standard, Full Polish Finish

Item #: 86567880
Brand: GearWrench
Model #: 81911D
Exact Tooling IR#: 04

Product Specifications
Tool Type	Flare Nut Wrench
System of Measurement	Metric
Size Range (mm)	9.0 x 11.0 - 19.0 x 21.0
Number of Pieces	6
Finish/Coating	Full Polish
Metric Size	9x11; 10x12; 13x14; 15x17; 16x18; 19x21
Number of Points	6
Warranty	Mfr's Lifetime Warranty
Additional Information	Flex Head Flare Nut Wrench Set
PSC Code	5120

$145.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 1-1/16" Standard Service Open End Wrench - 6-7/8" OAL, Single End, Satin Finish, 30° Head Angle

Item #: 65210544
Brand: Proto
Model #: J3534
Exact Tooling IR#: 04

Features and Benefits

Service wrenches are used for confined spaces and difficult-to-reach fasteners.

Standard wrenches engage and disengage with a fastener when either loosening or tightening.

Satin finishes offer slip resistant grips and are corrosion-resistant.

Single end wrenches are designed with one working end.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Service
Style	Standard
Size (Inch)	1-1/16
Finish/Coating	Satin
Head Type	Single End
Overall Length (Inch)	6-7/8
Head Angle	30
Head Thickness (Inch)	1/4
Federal Spec	GGG-W-636E
Warranty	Mfr's Lifetime Warranty
Material	Steel
Head Width (Inch)	1-7/8
PSC Code	5120

Product Specifications

Wrench Type Service

Style Standard

Size (Inch) 1-1/16

Finish/Coating Satin

Head Type Single End

Overall Length (Inch) 6-7/8

Head Angle 30

Head Thickness (Inch) 1/4

Federal Spec GGG-W-636E

Warranty Mfr's Lifetime Warranty

Material Steel

Head Width (Inch) 1-7/8

PSC Code 5120

$34.40

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ampco - 36mm Nonsparking Standard Spud Handle Open End Wrench - Single End, Plain Finish

Item #: 92730936
Brand: Ampco
Model #: W-2236
Exact Tooling IR#: 04

Features and Benefits

Spud handles, also known as spud wrenches, contain the standard box end on one side and a long pointed pin on the opposite. The needle side is used for aligning bolt holes.

Non-sparking box wrenches used in environments where flammable or combustible elements are present.

Standard wrenches engage and disengage with a fastener when either loosening or tightening.

Plain, uncoated tools do not have a finish or coating.

Single end wrenches are designed with one working end.

Product Specifications
Wrench Type	Spud Handle
Style	Non-Sparking
Style	Standard
Size (mm)	36
Finish/Coating	Plain
Head Type	Single End
PSC Code	5120

Product Specifications

Wrench Type Spud Handle

Style Non-Sparking

Style Standard

Size (mm) 36

Finish/Coating Plain

Head Type Single End

PSC Code 5120

$363.98

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Value Collection - 1/2" Drive Micrometer Type Ratchet Head Torque Wrench - 35 Ft/Lb to 140 Ft/Lb Torque, 21" OAL, 1/2 Ft/Lb Graduation

Item #: 63722375
Brand: Value Collection
Exact Tooling IR#: 04

Product Specifications
Type	Micrometer
Drive Size (Inch)	1/2
Maximum Torque (Ft/Lb)	140.00
Minimum Torque (Ft/Lb)	35.00
Overall Length (Inch)	21
Tool Type	Micrometer Type Ratchet Head Torque Wrench
Graduation	.5
Graduation	2
Additional Information	Ratchet Head Adjustable Clicker
PSC Code	5120

$114.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CDI - 18mm Offset Box End Torque Wrench Interchangeable Head - 0.709" Capacity, Use with CDI Torque Wrenches 50NMIMH, 100NIMIMH, 75MFIMHSS, 5T-I, 10T-I, 10ST-I, 50T-I

Item #: 73777625
Brand: CDI
Model #: TCQJXM18A
Exact Tooling IR#: 04

Product Specifications
Head Type	Offset Box End
Size (mm)	18
Maximum Torque (Ft/Lb)	60
Capacity (Decimal Inch)	0.71
For Use With	CDI Torque Wrenches 50NMIMH, 100NIMIMH, 75MFIMHSS, 5T-I, 10T-I, 10ST-I, 50T-I
PSC Code	5120

$98.94

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

GearWrench - 16 Piece, 8mm to 24mm, Ratcheting Combination Wrench Set - Metric Measurement Standard, Chrome Finish

Item #: 49247133
Brand: GearWrench
Model #: 86427
Exact Tooling IR#: 04

Product Specifications
Tool Type	Ratcheting Combination Wrench
System of Measurement	Metric
Size Range (mm)	8.0 - 24.0
Number of Pieces	16
Finish/Coating	Chrome
Metric Size	8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24
ASME Spec	B107.6
Warranty	Mfr's Limited Lifetime Warranty
PSC Code	5120

$331.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ampco - 33mm Nonsparking Standard Spud Handle Open End Wrench - Single End, Plain Finish

Item #: 92730969
Brand: Ampco
Model #: W-2233
Exact Tooling IR#: 04

Features and Benefits

Spud handles, also known as spud wrenches, contain the standard box end on one side and a long pointed pin on the opposite. The needle side is used for aligning bolt holes.

Non-sparking box wrenches used in environments where flammable or combustible elements are present.

Standard wrenches engage and disengage with a fastener when either loosening or tightening.

Plain, uncoated tools do not have a finish or coating.

Single end wrenches are designed with one working end.

Product Specifications
Wrench Type	Spud Handle
Style	Non-Sparking
Style	Standard
Size (mm)	33
Finish/Coating	Plain
Head Type	Single End
PSC Code	5120

Product Specifications

Wrench Type Spud Handle

Style Non-Sparking

Style Standard

Size (mm) 33

Finish/Coating Plain

Head Type Single End

PSC Code 5120

$275.35

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 15/16" Jaw Capacity, 6" Standard Adjustable Wrench - Steel, Satin Finish

Item #: 94502051
Brand: Proto
Model #: J706G
Exact Tooling IR#: 04

Features and Benefits

Standard wrenches engage and disengage with a fastener when either loosening or tightening.

Steel is a high tensile strength alloy.

Satin finishes offer slip resistant grips and are corrosion-resistant.

Product Specifications
Wrench Type	Standard
Wrench Size (Inch)	6
Jaw Capacity (Inch)	15/16
Material	Steel
Finish/Coating	Satin
ANSI Spec	B107.8m
Warranty	Mfr's Lifetime Warranty
Additional Information	Cushion Grip
PSC Code	5120

Product Specifications

Wrench Type Standard

Wrench Size (Inch) 6

Jaw Capacity (Inch) 15/16

Material Steel

Finish/Coating Satin

ANSI Spec B107.8m

Warranty Mfr's Lifetime Warranty

Additional Information Cushion Grip

PSC Code 5120

$28.48

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Sturtevant Richmont - 1" Open End Torque Wrench Interchangeable Head - 2,000 In/Lb Max Torque, Use with Sturtevant/Richmont Interchangeable Head Clicker Torque Wrenches

Item #: 78329281
Brand: Sturtevant Richmont
Model #: 819012
Exact Tooling IR#: 04

Product Specifications
Head Type	Open End
Size (Inch)	1
Maximum Torque (In/Lb)	2000
For Use With	Sturtevant/Richmont Interchangeable Head Clicker Torque Wrenches
PSC Code	5120

$84.06

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

ANSI Insert Code	SNMA432
ISO Insert Code	SNMA120408
Relief Angle	0
Insert Style	SNMA
Corner Radius (mm)	0.80
Corner Radius (Inch)	1/32
Corner Radius (Decimal Inch)	0.0312
Included Angle	90
Manufacturer Grade	UTI20T
Coating/Finish	Bright/Uncoated
Insert Hand	Neutral
Insert Thickness (Inch)	3/16
Insert Thickness	4.76
Insert Thickness (Decimal Inch)	0.1875
Inscribed Circle (Decimal Inch)	0.5000
Inscribed Circle (Inch)	1/2
Inscribed Circle (mm)	12.70
Insert Material	Carbide
Insert Shape	S - Square
Grade Characteristics	Cast Iron (K) - Moderate Wear-Resistance and Toughness to High Toughness; Steel (P) - Moderate Wear-Resistance and Toughness to High Toughness; Stainless Steel (M) - Moderate Wear-Resistance and Toughness to High Toughness
Side Clearance	Negative
Number Of Cutting Edges	8
Insert Shape Code	S
Clearance Code	N
Tolerance Code	M
Primary Workpiece Material Code	P; K; M
Chip Breaker	Flat Top
ANSI Size Code	432
ISO Size Code	120408
UNSPSC Code	23242105
Insert Size Code	4

Tool Type	90 Degree Offset Socket Wrench
Number of Points	6
System of Measurement	Inch
Size (Inch)	13/32
Finish/Coating	None
Warranty	Mfr's Limited Lifetime Warranty
PSC Code	5120