Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-2.5053MC

Item #: 32055675
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-2.5053MC

Product Specifications

Material Solid Carbide

Tolerance (Decimal Inch) +0.00002/-0.00002

Blank Number Wire Size #7

Inner Diameter (Decimal Inch) 2.5053

Calibrated Yes

Traceability Certification Included NIST

Standards B47.1 Gage Standards; ASME B89.1.6

Go/No Go Master

$2,250.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 1-1/8" Standard Spud Handle Open End Wrench - 17-1/4" OAL, Single End, Black Finish

Item #: 32864142
Brand: Proto
Model #: JC907A
Exact Tooling IR#: 04

Features and Benefits

Spud handles, also known as spud wrenches, contain the standard box end on one side and a long pointed pin on the opposite. The needle side is used for aligning bolt holes.

Standard wrenches engage and disengage with a fastener when either loosening or tightening.

Black finishes are oil-based and are non-reflective, corrosion-resistant and visually distinctive.

Single end wrenches are designed with one working end.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Spud Handle
Style	Standard
Size (Inch)	1-1/8
Finish/Coating	Black
Head Type	Single End
Overall Length (Inch)	17-1/4
Head Thickness (Inch)	21/32
Federal Spec	GGG-W-636E
Warranty	Mfr's Lifetime Warranty
Material	Steel
Head Width (Inch)	2-7/16
PSC Code	5120

Product Specifications

Wrench Type Spud Handle

Style Standard

Size (Inch) 1-1/8

Finish/Coating Black

Head Type Single End

Overall Length (Inch) 17-1/4

Head Thickness (Inch) 21/32

Federal Spec GGG-W-636E

Warranty Mfr's Lifetime Warranty

Material Steel

Head Width (Inch) 2-7/16

PSC Code 5120

$55.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 3-1/16" 12 Point Striking Box Wrench - Single End, 4-25/32" Head Diam x 1-7/8" Head Thickness, 16" OAL, Steel, Black Finish, 60° Offset

Item #: 07119605
Brand: Proto
Model #: J2649SW
Exact Tooling IR#: 04

Features and Benefits

Striking box wrenches are short, thick and designed to loosen or tighten large fasteners by the striking of a hammer. The hammer hits the wrench on the flat or anvil area for this operation.

Non-ratcheting wrenches must disengage and re-engage from the fastener to loosen or tighten.

Single end wrenches are designed with one working end.

Black finishes are oil-based and are non-reflective, corrosion-resistant and visually distinctive.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Striking
Style	Nonratcheting
Size (Inch)	3-1/16
Number of Points	12
Head Type	Single End
Finish/Coating	Black
Overall Length (Inch)	16
Material	Steel
Head Diameter (Inch)	4-25/32
Head Thickness (Inch)	1-7/8
Offset Angle	60
Warranty	Mfr's Lifetime Warranty
PSC Code	5120

Product Specifications

Wrench Type Striking

Style Nonratcheting

Size (Inch) 3-1/16

Number of Points 12

Head Type Single End

Finish/Coating Black

Overall Length (Inch) 16

Material Steel

Head Diameter (Inch) 4-25/32

Head Thickness (Inch) 1-7/8

Offset Angle 60

Warranty Mfr's Lifetime Warranty

PSC Code 5120

$255.20

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SK - 10 Piece, 10 to 19mm, Combination Wrench Set - Metric System of Measurement, Chrome Finish, Comes in Tray

Item #: 66010026
Brand: SK
Model #: 86142
Exact Tooling IR#: 04

Product Specifications
Tool Type	Combination Wrench
System of Measurement	Metric
Size Range (mm)	10.0 - 19.0
Number of Pieces	10
Finish/Coating	Chrome
Metric Size	10; 11; 12; 13; 14; 15; 16; 17; 18; 19
Container Type	Tray
PSC Code	5120

$422.86

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ridgid - 14" Cast Iron & Steel RapidGrip Pipe Wrench - 2" Pipe Capacity

Item #: 75388181
Brand: Ridgid
Model #: 10358
Exact Tooling IR#: 04

Product Specifications
Type	RapidGrip
Maximum Pipe Capacity (Inch)	2
Overall Length (Inch)	14
Material	Cast Iron & Steel
PSC Code	5120

$73.97

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ampco - 19/32" 12 Point Box Wrench - Single End, Aluminum Bronze, Plain Finish

Item #: 92715796
Brand: Ampco
Model #: 4604
Exact Tooling IR#: 04

Features and Benefits

Box wrenches are used for tightening and loosening bolts or nuts in areas where movement is limited. The end(s) of the box wrench are designed with an enclosure that can be placed over the fastener for gripping and rotating.

Non-ratcheting wrenches must disengage and re-engage from the fastener to loosen or tighten.

Non-sparking wrenches are used in environments where flammable or combustible elements are present.

Single end wrenches are designed with one working end.

Plain, uncoated tools do not have a finish or coating.

Aluminum bronze offers non-sparking, non-magnetic and corrosion-resistant properties and is ideal for use where flammable or combustible elements are present.

Product Specifications
Wrench Type	Box Wrench
Style	Nonratcheting
Style	Nonsparking
Size (Inch)	19/32
Number of Points	12
Head Type	Single End
Finish/Coating	Plain
Material	Aluminum Bronze
Warranty	Mfr's Limited Lifetime Warranty
PSC Code	5120

Product Specifications

Wrench Type Box Wrench

Style Nonratcheting

Style Nonsparking

Size (Inch) 19/32

Number of Points 12

Head Type Single End

Finish/Coating Plain

Material Aluminum Bronze

Warranty Mfr's Limited Lifetime Warranty

PSC Code 5120

$98.54

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

GearWrench - 16 Piece, 8mm to 24mm, 12 Point Combination Wrench Set - Metric Measurement Standard, Chrome Finish

Item #: 65963027
Brand: GearWrench
Model #: 85099
Exact Tooling IR#: 04

Product Specifications
Tool Type	Combination Wrench
System of Measurement	Metric
Size Range (mm)	8.0 - 24.0
Number of Pieces	16
Finish/Coating	Chrome
Number of Points	12
PSC Code	5120

$315.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 1-7/16" x 1-1/2" 12 Point Offset Box Wrench - Double End, 22-1/4" OAL, Steel, Polished Finish, 15° Offset

Item #: 85221364
Brand: Proto
Model #: J1162
Exact Tooling IR#: 04

Features and Benefits

Offset wrenches are designed with a bend /angle on each end for improved access to the nut or bolt.

Non-ratcheting wrenches must disengage and re-engage from the fastener to loosen or tighten.

Double end wrenches are designed with two working ends which may be the same or different sizes.

Polished finishes are easy to clean and corrosion-resistant.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Offset
Style	Nonratcheting
Size (Inch)	1-7/16 x 1-1/2
Number of Points	12
Head Type	Double End
Finish/Coating	Polished
Overall Length (Inch)	22-1/4
Material	Steel
Offset Angle	15
PSC Code	5120

Product Specifications

Wrench Type Offset

Style Nonratcheting

Size (Inch) 1-7/16 x 1-1/2

Number of Points 12

Head Type Double End

Finish/Coating Polished

Overall Length (Inch) 22-1/4

Material Steel

Offset Angle 15

PSC Code 5120

$99.26

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ampco - 75mm Nonsparking Standard Striking Open End Wrench - Single End, Plain Finish

Item #: 92752005
Brand: Ampco
Model #: WSO-75
Exact Tooling IR#: 04

Features and Benefits

Striking wrenches are designed to loosen or tighten fasteners with the force from the striking of a hammer on a flat surface.

Non-sparking box wrenches used in environments where flammable or combustible elements are present.

Standard wrenches engage and disengage with a fastener when either loosening or tightening.

Plain, uncoated tools do not have a finish or coating.

Single end wrenches are designed with one working end.

Aluminum bronze offers non-sparking, non-magnetic and corrosion-resistant properties and is ideal for use where flammable or combustible elements are present.

Product Specifications
Wrench Type	Striking
Style	Non-Sparking
Style	Standard
Size (mm)	75
Finish/Coating	Plain
Head Type	Single End
Material	Aluminum Bronze
PSC Code	5120

Product Specifications

Wrench Type Striking

Style Non-Sparking

Style Standard

Size (mm) 75

Finish/Coating Plain

Head Type Single End

Material Aluminum Bronze

PSC Code 5120

$1,031.38

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ampco - 6mm x 8mm Nonsparking Standard Open End Wrench - Double End, Plain Finish

Item #: 92733716
Brand: Ampco
Model #: WO-6X8
Exact Tooling IR#: 04

Features and Benefits

Open end wrenches are used for tightening or loosening fasteners. They are designed with an offset opening and are available in both single or double end options.

Non-sparking box wrenches used in environments where flammable or combustible elements are present.

Standard wrenches engage and disengage with a fastener when either loosening or tightening.

Plain, uncoated tools do not have a finish or coating.

Double end wrenches are designed with two working ends which may be the same or different sizes.

Aluminum bronze offers non-sparking, non-magnetic and corrosion-resistant properties and is ideal for use where flammable or combustible elements are present.

Product Specifications
Wrench Type	Open End Wrench
Style	Non-Sparking
Style	Standard
Size (mm)	6 x 8
Finish/Coating	Plain
Head Type	Double End
Warranty	Mfr's Limited Lifetime Warranty
Material	Aluminum Bronze
PSC Code	5120

Product Specifications

Wrench Type Open End Wrench

Style Non-Sparking

Style Standard

Size (mm) 6 x 8

Finish/Coating Plain

Head Type Double End

Warranty Mfr's Limited Lifetime Warranty

Material Aluminum Bronze

PSC Code 5120

$41.30

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ampco - 60", 6 Point, 90 ° Offset Socket Wrench

Item #: 92718634
Brand: Ampco
Model #: SL-60
Exact Tooling IR#: 04

Product Specifications

60", 6 Point, 90 ° Offset Socket Wrench -

Tool Type 90 Degree Offset Socket Wrench

Number of Points 6

System of Measurement Metric

Size (Inch) 60

Finish/Coating None

Warranty Mfr's Limited Lifetime Warranty

PSC Code 5120

$1,692.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CDI - 11/16" Flare Nut Torque Wrench Interchangeable Head - Use with CDI Torque Wrenches 50NMIMH, 100NIMIMH, 75MFIMHSS, 5T-I, 10T-I, 10ST-I, 50T-I

Item #: 73777344
Brand: CDI
Model #: TCQJRXS22A
Exact Tooling IR#: 04

Product Specifications
Head Type	Flare Nut
Size (Inch)	11/16
For Use With	CDI Torque Wrenches 50NMIMH, 100NIMIMH, 75MFIMHSS, 5T-I, 10T-I, 10ST-I, 50T-I
PSC Code	5120

$144.35

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

GearWrench - 5 Piece, 1/4" x 5/16" to 3/4" x 7/8", 6 Point Flare Nut Wrench Set - Inch Measurement Standard, Full Polish Finish

Item #: 86567872
Brand: GearWrench
Model #: 81910
Exact Tooling IR#: 04

Product Specifications
Tool Type	Flare Nut Wrench
System of Measurement	Inch
Size Range (Inch)	1/4 x 5/16 - 3/4 x 7/8
Number of Pieces	5
Finish/Coating	Full Polish
Sizes Included	1/4x5/16, 3/8x7/16, 1/2x9/16, 5/8x11/16, 3/4x7/8
Number of Points	6
Warranty	Mfr's Lifetime Warranty
Additional Information	Flex Head Flare Nut Wrench Set
PSC Code	5120

$110.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 60" Steel Straight Pipe Wrench - 6" Pipe Capacity

Item #: 72837677
Brand: Proto
Model #: J860HD
Exact Tooling IR#: 04

Product Specifications
Type	Straight Pipe Wrench
Maximum Pipe Capacity (Inch)	6
Overall Length (Inch)	60
Material	Steel
PSC Code	5120

$683.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CDI - 5/16" Open End Torque Wrench Interchangeable Head - Use with CDI Torque Wrenches 50NMIMH, 100NIMIMH, 75MFIMHSS, 5T-I, 10T-I, 10ST-I, 50T-I

Item #: 73762379
Brand: CDI
Model #: TCQJO10A
Exact Tooling IR#: 04

Product Specifications
Head Type	Open End
Size (Inch)	5/16
Maximum Torque (Ft/Lb)	9
For Use With	CDI Torque Wrenches 50NMIMH, 100NIMIMH, 75MFIMHSS, 5T-I, 10T-I, 10ST-I, 50T-I
PSC Code	5120

$73.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 7/16 x 7/16", Satin Finish, Combination Flare Nut Wrench - 12 Points, 6-1/32" OAL, Steel, Double End Head

Item #: 07119308
Brand: Proto
Model #: J3752T
Exact Tooling IR#: 04

Features and Benefits

Combination flare nut wrenches are designed with an open and a closed end. The jaws are long for reducing slippage or damage during an operation.

Double end wrenches are designed with two working ends which may be the same or different sizes.

Steel is a high tensile strength alloy.

Satin finishes offer slip resistant grips and are corrosion-resistant.

Product Specifications
Type	Combination Flare Nut
Size (Inch)	7/16 x 7/16
Head Type	Double End
Overall Length (Inch)	6-1/32
Material	Steel
Finish/Coating	Satin
Number of Points	12
Warranty	Mfr's Lifetime Warranty
Head Angle	15
Head Thickness (Inch)	11/32
PSC Code	5120

Product Specifications

Type Combination Flare Nut

Size (Inch) 7/16 x 7/16

Head Type Double End

Overall Length (Inch) 6-1/32

Material Steel

Finish/Coating Satin

Number of Points 12

Warranty Mfr's Lifetime Warranty

Head Angle 15

Head Thickness (Inch) 11/32

PSC Code 5120

$22.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CDI - 13mm Offset Box End Torque Wrench Interchangeable Head - 0.512" Capacity, Use with CDI Torque Wrenches 50NMIMH, 100NIMIMH, 75MFIMHSS, 5T-I, 10T-I, 10ST-I, 50T-I

Item #: 41067257
Brand: CDI
Model #: TCQJXM13A
Exact Tooling IR#: 04

Product Specifications
Head Type	Offset Box End
Size (mm)	13
Maximum Torque (Ft/Lb)	60
Capacity (Decimal Inch)	0.51
For Use With	CDI Torque Wrenches 50NMIMH, 100NIMIMH, 75MFIMHSS, 5T-I, 10T-I, 10ST-I, 50T-I
PSC Code	5120

$54.08

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ampco - 11/16" x 3/4" Nonsparking Standard Open End Wrench - Double End, Plain Finish

Item #: 92733880
Brand: Ampco
Model #: WO-11/16X3/4
Exact Tooling IR#: 04

Features and Benefits

Open end wrenches are used for tightening or loosening fasteners. They are designed with an offset opening and are available in both single or double end options.

Non-sparking box wrenches used in environments where flammable or combustible elements are present.

Standard wrenches engage and disengage with a fastener when either loosening or tightening.

Plain, uncoated tools do not have a finish or coating.

Double end wrenches are designed with two working ends which may be the same or different sizes.

Aluminum bronze offers non-sparking, non-magnetic and corrosion-resistant properties and is ideal for use where flammable or combustible elements are present.

Product Specifications
Wrench Type	Open End Wrench
Style	Non-Sparking
Style	Standard
Size (Inch)	11/16 x 3/4
Finish/Coating	Plain
Head Type	Double End
Warranty	Mfr's Limited Lifetime Warranty
Material	Aluminum Bronze
PSC Code	5120

Product Specifications

Wrench Type Open End Wrench

Style Non-Sparking

Style Standard

Size (Inch) 11/16 x 3/4

Finish/Coating Plain

Head Type Double End

Warranty Mfr's Limited Lifetime Warranty

Material Aluminum Bronze

PSC Code 5120

$71.57

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

GearWrench - 16 Piece, 8mm to 24mm, 12 Point Combination Wrench Set - Metric Measurement Standard, Full Polish Chrome Finish

Item #: 77224517
Brand: GearWrench
Model #: 9416
Exact Tooling IR#: 04

Product Specifications
Tool Type	Combination Wrench
System of Measurement	Metric
Size Range (mm)	8.0 - 24.0
Number of Pieces	16
Finish/Coating	Full Polish Chrome
Number of Points	12
PSC Code	5120

$165.40

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 5/8" Box End Torque Wrench Interchangeable Head - 2,050 In/Lb Max Torque, Use with Proto Torque Wrenches

Item #: 45139268
Brand: Proto
Model #: JH5-20B
Exact Tooling IR#: 04

Product Specifications
Head Type	Box End
Size (Inch)	5/8
Maximum Torque (In/Lb)	2050
For Use With	Proto Torque Wrench
PSC Code	5120

$63.51

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Material	Solid Carbide
Tolerance (Decimal Inch)	+0.00002/-0.00002
Blank Number Wire Size	#7
Inner Diameter (Decimal Inch)	2.5053
Calibrated	Yes
Traceability Certification Included	NIST
Standards	B47.1 Gage Standards; ASME B89.1.6
Go/No Go	Master

Tool Type	90 Degree Offset Socket Wrench
Number of Points	6
System of Measurement	Metric
Size (Inch)	60
Finish/Coating	None
Warranty	Mfr's Limited Lifetime Warranty
PSC Code	5120