16" Standard Extra Thin Open End Wrench - 10" OAL, Double End, Satin Finish, 15° Head Angle

Item #: 85242667
Brand: Proto
Model #: J3426
Exact Tooling IR#: 04

Features and Benefits

Extra thin wrenches are designed with an ultra thin profile and long handle. They are used where higher leverage and extended reach is required for either tightening or loosening a fastener.

Standard wrenches engage and disengage with a fastener when either loosening or tightening.

Satin finishes offer slip resistant grips and are corrosion-resistant.

Double end wrenches are designed with two working ends which may be the same or different sizes.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Extra Thin
Style	Standard
Size (Inch)	1/2 x 9/16
Finish/Coating	Satin
Head Type	Double End
Overall Length (Inch)	10
Head Angle	15
Federal Spec	GGG-W-636E
Warranty	Mfr's Lifetime Warranty
Material	Steel
PSC Code	5120

Product Specifications

Wrench Type Extra Thin

Style Standard

Size (Inch) 1/2 x 9/16

Finish/Coating Satin

Head Type Double End

Overall Length (Inch) 10

Head Angle 15

Federal Spec GGG-W-636E

Warranty Mfr's Lifetime Warranty

Material Steel

PSC Code 5120

$23.98

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - Wrench Sets PSC Code: 5120

Item #: 33756602
Brand: Proto
Model #: J1180A-TT
Exact Tooling IR#: 04

Product Specifications

Wrench Sets; PSC Code: 5120

PSC Code 5120

$198.79

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 1-11/16" 12 Point Tethered Striking Box Wrench - Single End, 13-7/16" OAL, Steel, Black Finish

Item #: 61645396
Brand: Proto
Model #: J2627SW-TT
Exact Tooling IR#: 04

Features and Benefits

Striking box wrenches are short, thick and designed to loosen or tighten large fasteners by the striking of a hammer. The hammer hits the wrench on the flat or anvil area for this operation.

Non-ratcheting wrenches must disengage and re-engage from the fastener to loosen or tighten.

Tethered wrenches are designed with a tethering system to prevent the user from dropping the wrench when using them at height.

Single end wrenches are designed with one working end.

Black finishes are oil-based and are non-reflective, corrosion-resistant and visually distinctive.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Striking
Style	Nonratcheting
Style	Tethered
Size (Inch)	1-11/16
Size (mm)	43
Number of Points	12
Head Type	Single End
Finish/Coating	Black
Overall Length (Inch)	13-7/16
Material	Steel
PSC Code	5120

Product Specifications

Wrench Type Striking

Style Nonratcheting

Style Tethered

Size (Inch) 1-11/16

Size (mm) 43

Number of Points 12

Head Type Single End

Finish/Coating Black

Overall Length (Inch) 13-7/16

Material Steel

PSC Code 5120

$103.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 15mm Open End Torque Wrench Interchangeable Head - 885 In/Lb Max Torque, Use with Proto Torque Wrenches

Item #: 45139110
Brand: Proto
Model #: JH5-15M
Exact Tooling IR#: 04

Product Specifications
Head Type	Open End
Size (mm)	15
Maximum Torque (In/Lb)	885
For Use With	Proto Torque Wrench
PSC Code	5120

$66.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Paramount - 1/4" Spanner Wrench Pin - 1/4 Long, For Paramount #91090985 (PAR-HW113D) Wrenches

Item #: 57875130
Brand: Paramount
Model #: PAR-HW113DPIN
Exact Tooling IR#: 04

Product Specifications
Diameter (Inch)	1/4
Length (Inch)	1/4
For Use With	Paramount #91090985 (PAR-HW113D) Wrench
PSC Code	5120

$3.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Sturtevant Richmont - 3/4" Drive Dial Torque Wrench - 120 Ft/Lb to 600 Ft/Lb Torque, 46-1/2" OAL, 10 Ft/Lb Graduation

Item #: 50589985
Brand: Sturtevant Richmont
Model #: 815706
Exact Tooling IR#: 04

Product Specifications
Type	Dial
Drive Size (Inch)	3/4
Maximum Torque (Ft/Lb)	600.00
Minimum Torque (Ft/Lb)	120.00
Overall Length (Decimal Inch)	46.5000
Tool Type	Dial Torque Wrench
Graduation	10
PSC Code	5120

$753.04

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ampco - 20mm Nonsparking Standard Open End Wrench - Single End, Plain Finish

Item #: 92731405
Brand: Ampco
Model #: 0126
Exact Tooling IR#: 04

Features and Benefits

Open end wrenches are used for tightening or loosening fasteners. They are designed with an offset opening and are available in both single or double end options.

Non-sparking box wrenches used in environments where flammable or combustible elements are present.

Standard wrenches engage and disengage with a fastener when either loosening or tightening.

Plain, uncoated tools do not have a finish or coating.

Single end wrenches are designed with one working end.

Product Specifications
Wrench Type	Open End Wrench
Style	Non-Sparking
Style	Standard
Size (mm)	20
Finish/Coating	Plain
Head Type	Single End
PSC Code	5120

Product Specifications

Wrench Type Open End Wrench

Style Non-Sparking

Style Standard

Size (mm) 20

Finish/Coating Plain

Head Type Single End

PSC Code 5120

$108.10

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 5/8 x 5/8", Satin Finish, Combination Flare Nut Wrench - 12 Points, 7-5/8" OAL, Steel, Double End Head

Item #: 07119332
Brand: Proto
Model #: J3755T
Exact Tooling IR#: 04

Features and Benefits

Combination flare nut wrenches are designed with an open and a closed end. The jaws are long for reducing slippage or damage during an operation.

Double end wrenches are designed with two working ends which may be the same or different sizes.

Steel is a high tensile strength alloy.

Satin finishes offer slip resistant grips and are corrosion-resistant.

Product Specifications
Type	Combination Flare Nut
Size (Inch)	5/8 x 5/8
Head Type	Double End
Overall Length (Inch)	7-5/8
Material	Steel
Finish/Coating	Satin
Number of Points	12
Warranty	Mfr's Lifetime Warranty
Head Angle	15
Head Thickness (Inch)	7/16
PSC Code	5120

Product Specifications

Type Combination Flare Nut

Size (Inch) 5/8 x 5/8

Head Type Double End

Overall Length (Inch) 7-5/8

Material Steel

Finish/Coating Satin

Number of Points 12

Warranty Mfr's Lifetime Warranty

Head Angle 15

Head Thickness (Inch) 7/16

PSC Code 5120

$30.74

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 1/2" x 9/16" 6 Point Ratcheting Box Wrench - Double End, 6-3/4" OAL, Steel

Item #: 85216109
Brand: Proto
Model #: J1193-A
Exact Tooling IR#: 04

Features and Benefits

Box wrenches are used for tightening and loosening bolts or nuts in areas where movement is limited. The end(s) of the box wrench are designed with an enclosure that can be placed over the fastener for gripping and rotating.

Ratcheting wrenches tighten and loosen without having to disengage from the fastener.

Double end wrenches are designed with two working ends which may be the same or different sizes.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Box Wrench
Style	Ratcheting
Size (Inch)	1/2 x 9/16
Number of Points	6
Head Type	Double End
Overall Length (Inch)	6-3/4
Material	Steel
PSC Code	5120

Product Specifications

Wrench Type Box Wrench

Style Ratcheting

Size (Inch) 1/2 x 9/16

Number of Points 6

Head Type Double End

Overall Length (Inch) 6-3/4

Material Steel

PSC Code 5120

$23.30

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

GearWrench - 9/16" x 5/8" & 11/16" x 3/4" 12 Point 4 in 1 Reversible Ratcheting Box Wrench - Double End, 1-11/64" Head Diam x 3/4" Head Thickness, 8-1/4" OAL, Steel, Polished Finish

Item #: 75230573
Brand: GearWrench
Model #: 85202D
Exact Tooling IR#: 04

Features and Benefits

Box wrenches are used for tightening and loosening bolts or nuts in areas where movement is limited. The end(s) of the box wrench are designed with an enclosure that can be placed over the fastener for gripping and rotating.

Reverse ratcheting wrenches are designed so they can reverse the ratcheting direction. Some ratchets have a switch to reverse the direction.

4 in 1 box wrenches offer four different sized in one tool. They feature both hex and square openings.

Double end wrenches are designed with two working ends which may be the same or different sizes.

Polished finishes are easy to clean and corrosion-resistant.

Steel is a high tensile strength alloy.

Product Specifications
Wrench Type	Box Wrench
Style	Reversible Ratcheting
Style	4 in 1
Size (Inch)	9/16 x 5/8, 11/16 x 3/4
Number of Points	12
Head Type	Double End
Finish/Coating	Polished
Overall Length (Inch)	8-1/4
Material	Steel
Head Diameter (Inch)	1-11/64
Head Thickness (Inch)	3/4
Warranty	Mfr's Lifetime Warranty
PSC Code	5120

Product Specifications

Wrench Type Box Wrench

Style Reversible Ratcheting

Style 4 in 1

Size (Inch) 9/16 x 5/8, 11/16 x 3/4

Number of Points 12

Head Type Double End

Finish/Coating Polished

Overall Length (Inch) 8-1/4

Material Steel

Head Diameter (Inch) 1-11/64

Head Thickness (Inch) 3/4

Warranty Mfr's Lifetime Warranty

PSC Code 5120

$46.14

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Proto - 15 Piece, 7mm to 32mm, Combination Wrench Set - Metric Measurement Standard, Satin Finish, Comes in Canvas Roll

Item #: 04438768
Brand: Proto
Model #: J1200P-MASD
Exact Tooling IR#: 04

Product Specifications
Tool Type	Combination Wrench
System of Measurement	Metric
Size Range (mm)	7.0 - 32.0
Number of Pieces	15
Finish/Coating	Satin
Metric Size	7, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 29, 30, 32
Container Type	Canvas Roll
PSC Code	5120

$501.15

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CDI - 15/16" Open End Torque Wrench Interchangeable Head - Use with CDI Torque Wrenches 50NMIMH, 100NIMIMH, 75MFIMHSS, 5T-I, 10T-I, 10ST-I, 50T-I

Item #: 45628831
Brand: CDI
Model #: TCQJO30A
Exact Tooling IR#: 04

Product Specifications
Head Type	Open End
Size (Inch)	15/16
Maximum Torque (Ft/Lb)	60
For Use With	CDI Torque Wrenches 50NMIMH, 100NIMIMH, 75MFIMHSS, 5T-I, 10T-I, 10ST-I, 50T-I
PSC Code	5120

$118.53

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Blackhawk by Proto - 8 Piece, 5/16" to 3/4", Combination Wrench Set - Inch Measurement Standard, Full Polish Finish, Comes in Metal Case

Item #: 93362200
Brand: Blackhawk by Proto
Model #: BW-3251L
Exact Tooling IR#: 04

Product Specifications
Tool Type	Combination Wrench
System of Measurement	Inch
Size Range (Inch)	5/16 - 3/4
Number of Pieces	8
Finish/Coating	Full Polish
Sizes Included	5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4
Warranty	Mfr's Lifetime Warranty
Container Type	Metal Case
Head Angle	15
Overall Length (Inch)	5.0 up to 8.5
Additional Information	Flex Geared Box Wrench Set
PSC Code	5120

$169.52

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CDI - 1-7/8" Box End Torque Wrench Interchangeable Head - Use with CDI Torque Wrenches 800NMIMH, 600T-I

Item #: 73760258
Brand: CDI
Model #: TCQZX60ADP
Exact Tooling IR#: 04

Product Specifications
Head Type	Box End
Size (Inch)	1-7/8
For Use With	CDI Torque Wrenches 800NMIMH, 600T-I
PSC Code	5120

$192.72

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ampco - 17mm x 22mm 12 Point Box Wrench - Double End, Aluminum Bronze, Plain Finish

Item #: 92721208
Brand: Ampco
Model #: 1038
Exact Tooling IR#: 04

Features and Benefits

Box wrenches are used for tightening and loosening bolts or nuts in areas where movement is limited. The end(s) of the box wrench are designed with an enclosure that can be placed over the fastener for gripping and rotating.

Non-ratcheting wrenches must disengage and re-engage from the fastener to loosen or tighten.

Non-sparking wrenches are used in environments where flammable or combustible elements are present.

Double end wrenches are designed with two working ends which may be the same or different sizes.

Plain, uncoated tools do not have a finish or coating.

Aluminum bronze offers non-sparking, non-magnetic and corrosion-resistant properties and is ideal for use where flammable or combustible elements are present.

Product Specifications
Wrench Type	Box Wrench
Style	Nonratcheting
Style	Nonsparking
Size (mm)	17 x 22
Number of Points	12
Head Type	Double End
Finish/Coating	Plain
Material	Aluminum Bronze
Warranty	Mfr's Limited Lifetime Warranty
PSC Code	5120

Product Specifications

Wrench Type Box Wrench

Style Nonratcheting

Style Nonsparking

Size (mm) 17 x 22

Number of Points 12

Head Type Double End

Finish/Coating Plain

Material Aluminum Bronze

Warranty Mfr's Limited Lifetime Warranty

PSC Code 5120

$175.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ampco - 3-3/4" to 4" Capacity, Spanner Wrench - Nonsparking

Item #: 92730498
Brand: Ampco
Model #: 7422
Exact Tooling IR#: 04

Product Specifications
Tool Type	NonSparking Spanner Wrench
Minimum Capacity (mm)	95
Minimum Capacity (Inch)	3-3/4
Maximum Capacity (Inch)	4
Finish/Coating	None
Number of Pieces	1
Warranty	Mfr's Limited Lifetime Warranty
PSC Code	5120

$165.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Ampco - 37mm Nonsparking Standard Open End Wrench - Single End, Plain Finish

Item #: 92731645
Brand: Ampco
Model #: 0158
Exact Tooling IR#: 04

Features and Benefits

Open end wrenches are used for tightening or loosening fasteners. They are designed with an offset opening and are available in both single or double end options.

Non-sparking box wrenches used in environments where flammable or combustible elements are present.

Standard wrenches engage and disengage with a fastener when either loosening or tightening.

Plain, uncoated tools do not have a finish or coating.

Single end wrenches are designed with one working end.

Product Specifications
Wrench Type	Open End Wrench
Style	Non-Sparking
Style	Standard
Size (mm)	37.00
Finish/Coating	Plain
Head Type	Single End
PSC Code	5120

Product Specifications

Wrench Type Open End Wrench

Style Non-Sparking

Style Standard

Size (mm) 37.00

Finish/Coating Plain

Head Type Single End

PSC Code 5120

$233.12

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

CDI - 65mm Open End Torque Wrench Interchangeable Head - Use with CDI Torque Wrenches 800NMIMH, 600T-I

Item #: 73761660
Brand: CDI
Model #: TCQZOM65ADP
Exact Tooling IR#: 04

Product Specifications
Head Type	Open End
Size (mm)	65
For Use With	CDI Torque Wrenches 800NMIMH, 600T-I
PSC Code	5120

$528.99

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Irwin - 48" Aluminum Straight Pipe Wrench - 6" Pipe Capacity

Item #: 66566209
Brand: Irwin
Model #: 2074148
Exact Tooling IR#: 04

Product Specifications
Type	Straight Pipe Wrench
Maximum Pipe Capacity (Inch)	6
Overall Length (Inch)	48
Material	Aluminum
PSC Code	5120

$291.18

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Wera - 13mm Open End Torque Wrench Interchangeable Head

Item #: 12788766
Brand: Wera
Model #: 05078653001
Exact Tooling IR#: 04

Product Specifications

13mm Open End Torque Wrench Interchangeable Head -

Head Type Open End

Size (mm) 13

PSC Code 5120

Additional Information For 9x12mm Insert Tools

$64.28

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It