Hand & Power Tools > Clamps (ET03) - (1859 Products)
Clevis w/Insulation Saddle: 5" Pipe, Carbon Steel
Item #: 03007499
Brand: Anvil
Model #: 0500173364Product Specifications
Product Type
Clevis w/Insulation Saddle
Material
Carbon Steel
Rod Size
5/8
Nominal Pipe Size
5
Load Capacity (Lb.)
750.000
Finish Coating
Plain
UNSPSC Code
31162306
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Rocky Mountain Twist / Part #: 953HS6LS
Item #: 95971297
Brand: Rocky Mountain Twist
Model #: 953HS6LSProduct Specifications
Type
Long
Drill Bit Size (Decimal Inch)
0.2040
Drill Bit Size (Wire)
#6
Drill Point Angle
135
Shank Type
Threaded
Tool Material
High Speed Steel
Point Type
Split
Overall Length (Decimal Inch)
2.1250
Cutting Direction
Right Hand
Flute Type
Spiral
Flute Length (Inch)
1-1/8
Series
P3
Maximum Drilling Depth (Decimal Inch)
1.1250
Shank Thread Size
1/4-28
Standards
NAS 965 Type B
Coolant Through
No
Flute By Diameter Ratio
4xD
Drill Bit Finish/Coating
Oxide
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Merit Abrasives / Part #: 08834181222
Item #: 89776983
Brand: Merit Abrasives
Model #: 08834181222Product Specifications
Pilot Diameter
0.25 in
Pilot Length
1.5000
Mandrel Shank Diameter
0.25 in
Mandrel Shank Length
1.25 in
Overall Length (Inch)
3.50
Maximum RPM
0.000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4733 ST FL RHC REAMER
Item #: MW205000004733
Brand: Monster Tool Company
Model #: 500-0004733
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.4733″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-3/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-3/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.4733″ |
| Decimal Equivalent | 0.4733″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Chucking Reamer; 0.052″ Dia. × 0.051″ Shank Dia. × 2-1/2″ OAL, 4 Flutes, HSS, Uncoated
Item #: TA15TR96030
Brand: Titan USA
Model #: TR96030
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.052″ |
| Overall Length (OAL) | 2-1/2″ |
| Usable Length (LU) | 1/2″ |
| Coating | Uncoated |
| Cutting Edge Length (L) | 1/2″ |
| Cutting Edge Material | HSS |
| Connection Diameter Machine Side (DCONMS) | 0.051″ |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Tool Type | Reamer |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: USA Sealing / Part #: ZUSANATSR-85
Item #: 95262648
Brand: USA Sealing
Model #: ZUSANATSR-85Product Specifications
Cell Type
Open
Material
Natural Sponge
Thickness (Inch)
3/4
Length Type
Long
Firmness
Soft (5-8 psi)
Shape
Rectangle
Backing Type
Acrylic Adhesive
Width (Inch)
1/4
Color
Black
Hardness
Soft
Texture
Textured
Grade
Standard
Minimum Temperature (Deg F - 3 Decimals)
-20.000
Maximum Temperature (F) ( - 0 Decimals)
160.000
Standards
MILC-3133; MIL-STD-670; ASTM D1056 1A2
Length Ft.
10.000
Density (Lb./Cu. Ft.)
26
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Parker / Part #: 68PLP-6M-2G
Item #: 13364245
Brand: Parker
Model #: 68PLP-6M-2GProduct Specifications
Fitting Type
Male Connector
Connection Type
Tube to Male
Material
Nickel-Plated Brass
Thread Size
1/8 in
Color
Silver with Yellow Release Button
Tube Outside Diameter (mm)
6.00
Fitting Shape
Straight
Hex Size (Inch)
9/16
Maximum Working Pressure (Psi - 3 Decimals)
300
Overall Length (Decimal Inch)
0.8700
Standards
UL94 V-0 Flame Resistance Standard; Silicone-Free Grease
Thread Type
BSPP
Minimum Work Temperature (F)
0
Maximum Work Temperature (Deg F - 3 Decimals)
200
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 4171883
Item #: 93297877
Brand: Widia
Model #: 4171883Product Specifications
Insert Style
SNMA
Insert Shape Code
S
Insert Size Code
433
Insert Shape
Square
Coating/Finish
TiCN; TiN; Al2O3
Manufacturer Grade
WK20CT
Corner Radius (Decimal Inch)
0.0472
Insert Material
Carbide
Hole Diameter (Decimal Inch)
0.2031
Maximum Depth of Cut (Decimal Inch)
0.2500
Inscribed Circle (Decimal Inch)
0.5000
Insert Holding Method
Clamp
Insert Hand
Neutral
Insert Thickness (Decimal Inch)
0.1875
Clearance Code
N
Tolerance Code
M
Included Angle
90.00
Relief Angle
0.000
Series
SNMA
Coating Process
MTCVD
Rake
Negative
Wiper Edge
No
Insert Length (Decimal Inch)
0.5000
Number Of Cutting Edges
8
Primary Workpiece Material
Cast Iron
Primary Workpiece Material Code
K
Secondary Workpiece Material
Steel
Secondary Workpiece Material Code
P
Ansi Code
SNMA433
Iso Code
SNMA120412
Manufacturers Catalog Number
SNMA433
Cutting Direction
Neutral
Coating Classification
Multi-Layered CVD
Chip Breaker
None
Style
SNMA
Width (Decimal Inch - 4 Decimals)
0.5000
Multi-Use Tool
Yes
Full Radius
No
Multi-Use Application
External Turning; Internal Turning
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Onward / Part #: 92X25BC
Item #: 09860875
Brand: Onward
Model #: 92X25BCProduct Specifications
Brace Type
Corner Brace
Length (Inch)
2.50
Material
Steel
Width (Inch)
2
Finish/Coating
Steel; Zinc
Mounting Hardware Included
No
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 4171641
Item #: 95145942
Brand: Widia
Model #: 4171641Product Specifications
Insert Style
SNMA
Insert Shape Code
S
Insert Size Code
433
Insert Shape
Square
Coating/Finish
TiCN; TiN; Al2O3
Manufacturer Grade
WK05CT
Corner Radius (Decimal Inch)
0.0472
Insert Material
Carbide
Hole Diameter (Decimal Inch)
0.2031
Maximum Depth of Cut (Decimal Inch)
0.2500
Inscribed Circle (Decimal Inch)
0.5000
Insert Holding Method
Clamp
Insert Hand
Neutral
Insert Thickness (Decimal Inch)
0.1875
Clearance Code
N
Tolerance Code
M
Included Angle
90.00
Relief Angle
0.000
Series
SNMA
Coating Process
MTCVD
Rake
Negative
Wiper Edge
No
Insert Length (Decimal Inch)
0.5000
Number Of Cutting Edges
8
Primary Workpiece Material
Cast Iron
Primary Workpiece Material Code
K
Secondary Workpiece Material
Steel
Secondary Workpiece Material Code
P
Ansi Code
SNMA433
Iso Code
SNMA120412
Manufacturers Catalog Number
SNMA433
Cutting Direction
Neutral
Coating Classification
Multi-Layered CVD
Chip Breaker
None
Style
SNMA
Width (Decimal Inch - 4 Decimals)
0.5000
Multi-Use Tool
Yes
Full Radius
No
Multi-Use Application
External Turning; Internal Turning
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
8.8 mm Dia. × 0.315″ Shank Dia. × 2.8″ OAL, Carbide Reamer
Item #: FB5088867008800
Brand: duMont
Model #: 88867008800
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 8.8 mm |
| Overall Length (OAL) | 2.8″ |
| Usable Length (LU) | 0.984″ |
| Grade | K15 |
| Cutting Edge Length (L) | 0.984″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 0.315″ |
| Tool Type | Reamer |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Dynatex / Part #: 143349
Item #: 98791346
Brand: Dynatex
Model #: 143349Product Specifications
Chemical Type
RTV Silicone
Container Size
85 g
Container Type
Tube
Color
Gray
Application
Automotive
Full Cure Time
24 h
Material Application
Metal
Tack-free Dry Time
15 min
Series
Advanced Formula Gasket Maker
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: NIBCO / Part #: M001400
Item #: 60345659
Brand: NIBCO
Model #: M001400Product Specifications
Fitting Type
Transition Coupling
Fitting Size
1 in
Material
CPVC
End Connection
Slip IPS x Slip CTS
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 2748804
Item #: 99838591
Brand: Widia
Model #: 2748804Product Specifications
Tap Type
Machine
Thread Size (Inch)
#8-32
Thread Limit
H2
Class Of Fit
3B
Number Of Flutes
4
Chamfer
Plug
Material
High Speed Steel
Coating/Finish
Uncoated
Threads per Inch
32
Thread Direction
Right Hand
Coolant Through
No
Thread Standard
UNC
Thread Pitch (Decimal Inch)
0.0313
Overall Length (Decimal Inch)
2.1250
Thread Length (Decimal Inch)
0.7500
Thread Depth (Decimal Inch)
0.7500
Application
Metal
Shank Diameter (Decimal Inch)
0.1680
Square Length (mm)
6.35
Square Size (Decimal Inch)
0.1310
Series
5305
Shank Length (Decimal Inch)
1.3750
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4913 ST FL RHC REAMER
Item #: MW205000004913
Brand: Monster Tool Company
Model #: 500-0004913
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.4913″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/2″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/2″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.4913″ |
| Decimal Equivalent | 0.4913″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 1″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 2746853
Item #: 93310761
Brand: Widia
Model #: 2746853Product Specifications
Thread Size (Inch)
3/8-24
Number Of Flutes
3
Chamfer
Plug
Thread Limit
H3
Class Of Fit
H3
Coating/Finish
TiN
Threads per Inch
24
Material
High Speed Steel
Coolant Through
No
Thread Direction
Right Hand
Thread Depth (Decimal Inch)
1.2500
Thread Pitch (Decimal Inch)
0.0417
Thread Standard
UNC
Thread Length (Decimal Inch)
1.2500
Overall Length (Decimal Inch)
2.9375
Shank Diameter (Decimal Inch)
0.3810
Square Size (Decimal Inch)
0.2860
Material Application
Non-Ferrous Metal; Stainless Steel; Cast Iron; Steel
Series
5301/2301
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Deltronic / Part #: 0.5915 CLASS X
Item #: 72686561
Brand: Deltronic
Model #: 0.5915 CLASS XProduct Specifications
Diameter of Measurement (Decimal Inch)
0.5915
Tolerance (Decimal Inch)
0.00004
Material
Tool Steel
Application
For Production Inspection Requirements
Includes
Certificate of Accuracy with NIST Traceability
Length (Inch)
3
Coating/Finish
Micro
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: PIC Gauges / Part #: S101D-254H
Item #: 74787664
Brand: PIC Gauges
Model #: S101D-254HProduct Specifications
Gauge Type
Utility Gauge
Scale Type
Single
Accuracy (%)
3-2-3%
Dial Type
Analog
Thread Type
1/4" MNPT
Bourdon Tube Material
Bronze
Type of Liquid Filler
No-Fill
Mount Type
Lower
Wetted Parts Material
Copper Alloy
Dial Diameter (Decimal Inch)
2.5000
Minimum Pressure (psi)
0.00
Maximum Pressure (Psi - 2 Decimals)
300.00
Minimum Hg
0
Maximum Hg
300
Liquid Filled
No
Case Material
Steel
Lens Material
Plastic
Color
Black
Thread Size
1/4 in NPT
Minimum Working Temperature (Deg F)
-30
Maximum Working Temperature (F)
180.000
Minimum Working Temperature (Deg C)
-34
Maximum Working Temprature (Deg C)
82
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.5001 ST FL RHC REAMER
Item #: MW205000005001
Brand: Monster Tool Company
Model #: 500-0005001
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.5001″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/2″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/2″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.5001″ |
| Decimal Equivalent | 0.5001″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 1″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 2751045
Item #: 72390073
Brand: Widia
Model #: 2751045Product Specifications
Tap Type
Machine
Thread Size (Inch)
#10-32
Class Of Fit
2B
Number Of Flutes
4
Chamfer
Plug
Material
High Speed Steel
Coating/Finish
Uncoated
Threads per Inch
32
Thread Direction
Right Hand
Coolant Through
No
Thread Standard
UNF
Thread Pitch (Decimal Inch)
0.0313
Overall Length (Decimal Inch)
2.3750
Thread Length (Decimal Inch)
0.8750
Thread Depth (Decimal Inch)
0.8750
Application
Metal
Shank Diameter (Decimal Inch)
0.1940
Square Length (mm)
6.35
Square Size (Decimal Inch)
0.1520
Series
7305
Shank Length (Decimal Inch)
1.5000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It