2 4Fl Carbide RF100 Diver End Mill-.031 Rad-Cylindrical Shank-nano-Si

Item #: GD1667590079440
Manufacturer: Guhring
Mfg #: 9067590079

Technical Specifications:
•Brand Name: Guhring •Coating: nano-Si •Flute Length: 3/4 •Helix Angle: 36/38/37/38 •Material: Carbide •Number of Flutes: 4 •Overall Length: 2-1/2 •Radius: .031 •Shank Diameter: 5/16 •Shank Type: Cylindrical •Size: 5/16

Description:
•nano-Si® coating •Variable helix •Face geometry for drilling and ramping •Plunge angle up to 45° •High feed rate for plunging and slotting •High metal removal rate •Up to 100% increased cutting speed in steel •Good for use with aluminum, alloyed steels, free cutting steels, tool steels, stainless steels, titanium and titanium alloys, cast iron, special alloys

Shipping Info:
•Actual Weight - .0900 •Dimensions - Height: .818 Length: 2.62 Width: .818

$75.19

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/2" Dia. - 5/8" LOC - 2-1/2" OAL - .015 CR 7FL Carbide End Mill - AlCrNx

Item #: DD4266001
Manufacturer: Imco
Mfg #: 66001

Technical Specifications:
•Brand Name: Imco •Coating: AlCrNX •Flute Length: 5/8 •Material: Solid Carbide •Number of Flutes: 7 •Overall Length: 2-1/2 •Radius: .015 •Shank Diameter: 1/2 •Size: 1/2 •Style: Single End •Trade Name: M527 enDURO

Description:
•Advanced cutting edge design for higher metal removal in hard-to-machine materials •Unique vibration dampening geometry for maximum tool stability •Specifically designed to run wet or dry on today's high speed, high efficiency machines •40° Helix •AlCrNX Coating

Shipping Info:
•Actual Weight - .9990

$131.04

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/32 x 1/4 x 1/32 x 2-1/2 2Fl Ball Carbide End Mill - WXL

Item #: TP4836900411
Manufacturer: OSG USA, Inc.
Mfg #: 36900411

Technical Specifications:
•Brand Name: OSG USA, Inc. •Coating: WXL •Flute Length: 1/32 •Helix Angle: 30 Degree •Length Below Shank: 5/16 •List No.: 3690 •Material: Carbide •Neck Length: 5/16 •Number of Flutes: 2 •Overall Length: 2-1/2 •Shank Diameter: 1/4 •Shank Type: Round Shank •Size: 1/32 •Style: Ball •Trade Name: EXOCARB® WXL® •Type: Ball

Description:
•OSG List No. 3690

Shipping Info:
•Actual Weight - .0600 •Dimensions - Height: .450 Length: 2.75 Width: .550

$77.26

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

R217.15-140150AC26N 1630 14mm 5 FL Solid Carbide Thread Mill w/Cylindrical Shank

Item #: FF82R2176251206
Manufacturer: Sandvik Coromant
Mfg #: 6251206

Technical Specifications:
•Brand Name: Sandvik Coromant •Coating: TiAlN •Flute Length: 26mm •For Use With: All Materials •Grade: 1630 •Helix Angle: 10° helix, 9-12° rake •Material: Solid Carbide •Model Number: R217.15-140150AC26N 1630 •Number of Flutes: 5 •Shank Type: Cylindrical •Size: 14mm •Trade Name: CoroMill Plura

Description:

Shipping Info:
•Actual Weight - .3900

$821.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8" Dia. - 1" LOC - 2-3/4" OAL - .020 Radius 4 FL Carbide S/E HP End Mill-AlTiN

Item #: DD25EM15302402
Manufacturer: Premier HP
Mfg #:

Technical Specifications:
•Brand Name: Premier HP •Coating: AlTiN •Flute Length: 1 •Material: Solid Carbide •Number of Flutes: 4 •Overall Length: 2-3/4 •Radius: .020 •Shank Diameter: 3/8 •Size: 3/8 •Style: Medium •Type: Single End

Description:
•AlTiN Coated Carbide End Mills •4 Flute 30 Corner Radius AlTiN Coated End Mills •HP Carbide End Mills are made of micro-grain carbide, which is processed by special high temperature furnaces •The carbide is pressed at high temperatures •This process allows no porosity after cooling andcreates a tougher, stronger end mill •O.D. Tolerance: -.0005" -.0015" •Shank Tolerance: 0 -.0003" •Can be widely used for milling from raw materials to hardened steels •Superior workpiece finishes •Longevity is more than five times as long as non-coated end mill •Through AlTiN coating endurance when dry-milling

Shipping Info:
•Actual Weight - .1500 •Dimensions - Height: .500 Length: 3.00 Width: .500

$55.21

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/16 x 3/16 x 3/8 x 2 x 7 Flute Square 2xD Pow-R-Path Mill AlCRNX Coated-Series IPT7-SQ

Item #: DD4463476
Manufacturer: Imco
Mfg #: 63476

Technical Specifications:
•Brand Name: Imco •Coating: AlCrNX •Flute Length: 3/8 •List No.: IPT7-SQ •Material: Solid Carbide •Number of Flutes: 7 •Overall Length: 2 •Radius: None •Shank Diameter: 3/16 •Shank Type: Round Shank •Size: 3/16 •Style: Single End •Trade Name: IPT7-SQ Pow.R.Path

Description:
•Specifically designed to maximize High Efficiency Machining (HEM) techniques •Unique flute design for maximum metal removal rates •Thick core for maximum stability and tool life •40° Helix •AlCrNX Coated

Shipping Info:
•Actual Weight - .0360 •Dimensions - Height: .477 Length: 3.00 Width: .477

$51.38

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/8" Dia. - 3/8" LOC - 1-1/2" OAL - .015 Radius 2 FL Carbide S/E HP End Mill-Uncoated

Item #: DD4033526
Manufacturer: Imco
Mfg #: 33526

Technical Specifications:
•Brand Name: Imco •Coating: Uncoated •Flute Length: 3/8 •Material: Solid Carbide •Number of Flutes: 2 •Overall Length: 1-1/2 •Radius: .015 •Shank Diameter: 1/8 •Shank Type: Round Shank •Size: 1/8 •Style: Round Shank •Trade Name: M202 Streaker •Type: 45° Helix

Description:
•Solid carbide 2 flute square end 45 helix, center cutting end mill •2 flute round shank •2 flute style M202: great for both roughing and finishing •Use for high or low speed applications •High strength carbide •For high chip loads •Excellent surface finishes

Shipping Info:
•Actual Weight - .0250 •Dimensions - Height: .500 Length: 2.60 Width: .500

$35.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8" Dia. - 1/2" LOC - 3 OAL Ball Nose 5 FL Carbide S/E HP End Mill-AlCrNX

Item #: DD4065713
Manufacturer: Imco
Mfg #: 65713

Technical Specifications:
•Brand Name: Imco •Coating: AlCrNX •Flute Length: 1/2 •For Use With: Stainless Steel, Titanium, Carbon Steels •Length Below Shank: 1-3/8 •Material: Solid Carbide •Number of Flutes: 5 •Overall Length: 3 •Radius: Full •Shank Diameter: 3/8 •Size: 3/8 •Trade Name: M525N enDURO •Type: Single End

Description:
•Neck relief permits clearance in deeper cavities •Excellent for contouring applications in a variety of materials •Unique vibration dampening geometry for chatter-free machining •Round shank •40° Helix, AlCrN-X coated

Shipping Info:
•Actual Weight - 1.0000

$129.53

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/16" Dia. - 13/16" LOC - 2-1/2" OAL - 4 FL Carbide S/E HP End Mill-nACo

Item #: DD8115676
Manufacturer: Rapidkut
Mfg #: :

Technical Specifications:
•Brand Name: Rapidkut •Chamfer: .011 x 45° •Coating: nACo •Flute Length: 13/16 •Material: Solid Carbide •Number of Flutes: 4 •Overall Length: 2-1/2 •Shank Diameter: 5/16 •Size: 5/16 •Style: Variable Helix

Description:
•Maximize productivity when machining titanium, stainless and alloyed steels and all ferrous materials •Chatter-free machining •Heavier feed rates •Higher metal removal rates •Superior surface finishes •Fewer tool changes •Effective in machining all ferrous materials up to 54 HRc •Versatile tooling for roughing, semi-finishing & finishing operations •Heavy slotting " can slot up to 1xD axial depth •Heavy profiling " up to full flute length and 50% radial depth of cut

Shipping Info:
•Actual Weight - .1000 •Dimensions - Height: .500 Length: 3.10 Width: .500

$53.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/4" Dia. - 2-1/2" OAL - Solid Carbide - Square End HP End Mill- FL

Item #: TP4836040911
Manufacturer: OSG USA, Inc.
Mfg #: 36040911

Technical Specifications:
•Brand Name: OSG USA, Inc. •Coating: WXL •Flute Length: 3/4 •Helix Angle: 30 Degree •List No.: 3604 •Material: Carbide •Number of Flutes: 4 •Overall Length: 2-1/2 •Shank Diameter: 1/4 •Shank Type: Round Shank •Size: 1/4 •Style: Square •Trade Name: EXOCARB® WXL® •Type: Square End

Description:
•EXOCARB WXL coated carbide end mills •4 Flute square end •High efficiency milling in a wide range of materials including non-ferrous, mild steels, and hardened steels up to 50 HRC •The WXL coating was developed to improve performance in a wide range of materials, but also offer consistent milling in both wet and dry applications •The WXL coated end mills not only provide an new improved coating, but new enhanced geometries along with a better substrate, allowing the WXL coating higher adhesion properties and cutting performance •Applications: for side milling & shallow slotting in non-ferrous and hardened steels •Benefits: WXL coated, enhanced geometry and substrate

Shipping Info:
•Actual Weight - .0650 •Dimensions - Height: .450 Length: 2.60 Width: .550

$57.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/2 x 1/2 x 1-1/4 x 3-1/2 4Fl Square Carbide End Mill - TiALN

Item #: TP45VG4415002
Manufacturer: OSG USA, Inc.
Mfg #: VG441-5002

Technical Specifications:
•Brand Name: OSG USA, Inc. •Coating: TiALN •Flute Length: 1-1/4 •Helix Angle: 35 Degree •List No.: VG441 •Material: Carbide •Number of Flutes: 4 •Overall Length: 3-1/2 •Shank Diameter: 1/2 •Shank Type: Weldon Shank •Size: 1/2 •Style: Square •Trade Name: HY-PRO® CARB VGx •Type: Square

Description:
•High Performance Carbide •Center Cutting •TiALN Coating •Square End •4 Flute •Recommended for Cast Iron, Carbon Steels, Alloy Steels, Die Steels, Stainless Steels, Hardened Steels up to 45 HrC and High Heat Alloys

Shipping Info:
•Actual Weight - .3200 •Dimensions - Height: .650 Length: 4.40 Width: .800

$95.93

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8 x 7/8 x 7/8 x 2-1/2 4Fl .015 C/R Carbide End Mill - TiALN

Item #: TP45VG4343758
Manufacturer: OSG USA, Inc.
Mfg #: VG434-3758

Technical Specifications:
•Brand Name: OSG USA, Inc. •Coating: TiALN •Flute Length: 7/8 •Helix Angle: 35 Degree •List No.: VG434 •Material: Carbide •Number of Flutes: 4 •Overall Length: 2-1/2 •Radius: .015 •Shank Diameter: 7/8 •Shank Type: Weldon Shank •Size: 3/8 •Style: Corner Radius •Trade Name: HY-PRO® CARB VGx •Type: Corner Radius

Description:
•High Performance Carbide •Center Cutting •TiALN Coating •Corner Radius •4 Flute •Recommended for Cast Iron, Carbon Steels, Alloy Steels, Die Steels, Stainless Steels, Hardened Steels up to 45 HrC and High Heat Alloys

Shipping Info:
•Actual Weight - .1300 •Dimensions - Height: .650 Length: 3.45 Width: .700

$50.68

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/4 x 3/4 x 2-1/4 x 5 x 7 Flute Square 3xD Pow-R-Path Mill AlCRNX Coated-Series IPT7-SQ

Item #: DD4463585
Manufacturer: Imco
Mfg #: 63585

Technical Specifications:
•Brand Name: Imco •Coating: AlCrNX •Flute Length: 2-1/4 •List No.: IPT7-SQ •Material: Solid Carbide •Number of Flutes: 7 •Overall Length: 5 •Radius: None •Shank Diameter: 3/4 •Shank Type: Round Shank •Size: 3/4 •Style: Single End •Trade Name: IPT7-SQ Pow.R.Path

Description:
•Specifically designed to maximize High Efficiency Machining (HEM) techniques •Unique flute design for maximum metal removal rates •Thick core for maximum stability and tool life •40° Helix •AlCrNX Coated

Shipping Info:
•Actual Weight - .5000

$439.80

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/2 x 1/2 x 1-1/4 x 3-1/4 x 7 Flute Square 2.5xD Pow-R-Path Mill AlCRNX Coated-Series IPT7-SQ

Item #: DD4463214
Manufacturer: Imco
Mfg #: 63214

Technical Specifications:
•Brand Name: Imco •Coating: AlCrNX •Flute Length: 1-1/4 •List No.: IPT7-SQ •Material: Solid Carbide •Number of Flutes: 7 •Overall Length: 3-1/4 •Radius: None •Shank Diameter: 1/2 •Shank Type: Round Shank •Size: 1/2 •Style: Single End •Trade Name: IPT7-SQ Pow.R.Path

Description:
•Specifically designed to maximize High Efficiency Machining (HEM) techniques •Unique flute design for maximum metal removal rates •Thick core for maximum stability and tool life •40° Helix •AlCrNX Coated

Shipping Info:
•Actual Weight - .3000 •Dimensions - Height: .700 Length: 3.70 Width: .700

$148.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/4" Dia. - 3/4" LOC - 2-1/2" OAL - .007 - .010 Radius 3 FL Carbide S/E HP End Mill-ZrN

Item #: MT7192630
Manufacturer: Morse Cutting Tools
Mfg #: 92630

Technical Specifications:
•Brand Name: Morse Cutting Tools •Coating: ZrN •Flute Length: 3/4 •List No.: 5992 •Material: Solid Carbide •Number of Flutes: 3 •Overall Length: 2-1/2 •Radius: .007 - .010 •Shank Diameter: 1/4 •Size: 1/4 •Style: 5992z •Type: variFLUTE NF Single End Corner Radius End Mill

Description:
•HPE ULTRA High Performance Solid Carbide End Mill •ZrN Coated (Zirconium Nitride) •Advanced VariFlute design •For Aluminum and Non Ferrous Materials •Regular Length Three Flute with Corner Radius

Shipping Info:
•Actual Weight - .0600 •Dimensions - Height: .200 Length: 2.50 Width: .200

$44.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/8 x 1/4 x 3/8 x 2-1/2 4Fl .010 C/R Carbide End Mill - WXS

Item #: TP4844450001
Manufacturer: OSG USA, Inc.
Mfg #: 44450001

Technical Specifications:
•Brand Name: OSG USA, Inc. •Coating: WXS •Flute Length: 3/8 •Helix Angle: 45 Degree •List No.: 4445 •Material: Carbide •Number of Flutes: 4 •Overall Length: 2-1/2 •Radius: .010 •Shank Diameter: 1/4 •Size: 1/8 •Style: Corner Radius •Trade Name: EXOCARB® WXS® •Type: Corner Radius

Description:
•OSG List No. 4445

Shipping Info:
•Actual Weight - .0550 •Dimensions - Height: .450 Length: 2.60 Width: .550

$89.97

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/2x1/2 x5/8 x3 TuffCut® XR7 7 FL EM ALtima® Blaze.015 CR

Item #: DD1518515
Manufacturer: M A Ford
Mfg #: 18050002B

Technical Specifications:
•Brand Name: M A Ford •Coating: ALtima® Blaze •Flute Length: 5/8 •List No.: 180 •Material: Carbide •Model Number: 18050002B •Number of Flutes: 7 •Overall Length: 3 •Radius: .015 •Shank Diameter: 1/2 •Size: 1/2 •Trade Name: Tuff Cut® XR7 •Type: Single End

Description:
•Uniquely designed heli-pitch grinding geometry promotes continual, vibration free cutting regardless of depth of cut or width of cut •38° Helix •M.A. Ford List #180

Shipping Info:
•Actual Weight - .3000 •Dimensions - Height: .600 Length: 3.50 Width: .700

$102.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/16 TuffCut XR 4 Flute Carbide End Mill .015R

Item #: DD1517733
Manufacturer: M A Ford
Mfg #: 17718702A

Technical Specifications:
•Brand Name: M A Ford •Coating: ALtima® •Flute Length: 3/16 •List No.: 177 •Material: Carbide •Model Number: 17718702A •Number of Flutes: 4 •Overall Length: 2 •Radius: .015 •Shank Diameter: 3/16 •Size: 3/16 •Trade Name: Tuff Cut® XR •Type: Single End

Description:
•Designed for extreme productivity •Unique flute geometry reduces harmonics at increased feeds and speed

Shipping Info:
•Actual Weight - .0259 •Dimensions - Height: .310 Length: 2.00 Width: .310

$27.94

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/16X2 OAL 2FL SQ EM-UNC(P)

Item #: DD4032942
Manufacturer: Imco
Mfg #: 32942

Technical Specifications:
•Brand Name: Imco •Material: Solid Carbide •Shank Type: Round Shank •Style: Single End •Trade Name: M202 Streaker

Description:
•Solid carbide 2 flute ball end 45 helix •Our precision located holding flats are the best alternative when using side-lock end mill holders •Tools with flats are not recommended for collet or milling chucks, or for use in high speed machining applications

Shipping Info:
•Actual Weight - .0500 •Dimensions - Height: .500 Length: 2.60 Width: .500

$30.55

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/8 TuffCut X-AL 3 Fl Center Cutting Aluminum Finisher End Mill .015R

Item #: DD1513006
Manufacturer: M A Ford
Mfg #: 13837500R.

Technical Specifications:
•Brand Name: M A Ford •Coating: Uncoated •Flute Length: 1/2 •List No.: 138R •Material: Carbide •Model Number: 13837500R.015 •Number of Flutes: 3 •Overall Length: 2 •Radius: .015 •Shank Diameter: 3/8 •Size: 3/8 •Trade Name: TuffCut® X-AL •Type: Single End

Description:

Shipping Info:
•Actual Weight - .1034 •Dimensions - Height: .500 Length: 2.00 Width: .500

$55.26

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It