BES Up To 2022 $100-$250 Products - (25001 Products)
0 - 1"/0 - 25mm Measuring Range - .00005"/.001mm Resolution - Ratchet Thimble - Carbide Face - Electronic 4-Way Reading Outside Micrometer with SPC
Item #: NA5554866001
Manufacturer: Fowler
Mfg #: 54-866-001
Technical Specifications:
•Brand Name: Fowler
•Face: Carbide
•Measuring Range: 0 - 1 / 0 - 25mm
•Model Number: 54-866-001
•Resolution: .00005 / 0.001mm
•Thimble Type: Ratchet
•Type: Electronic 4-Way Reading Outside Micrometer with SPC
Description:
•QuadraMic Electronic 4-Way Reading Micrometer
•Features two displays which enable the operator to read as a right or left-handed micrometer.
•Absolute measuring system
•Direct RS232 output
•Carbide measuring faces
•Includes wooden case
Shipping Info:
•HAZ 5C
•UPS Ground - No Additional Shipping Charges
•UPS Air - Cannot Ship Air
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 1.0000
•Additional handling -$15.00 per item
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
16X5/32X1 FOUNDRY C/O WHL A/O/ZA
Item #: MH601622205
Manufacturer: Norton Abrasives
Mfg #: 6625342220
Technical Specifications:
*Brand Name: Norton Abrasives
Description:
Shipping Info:
*Actual Weight - 3.7750
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-1.8366M
Item #: 36951622
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-1.8366MProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00002/-0.00002
Blank Number Wire Size
#6
Inner Diameter (Decimal Inch)
1.8366
Calibrated
No
Traceability Certification Included
No
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT50 EM 1-1/2 ENDMILL HOLDERS
Item #: TG604590163
Manufacturer: Tungaloy
Mfg #: 4590163
Technical Specifications:
*Brand Name: Tungaloy
Description:
Shipping Info:
*Actual Weight - .0090
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 1/2 x 6 - Oversize Oil Hardening Flat Stock
Item #: LY603214
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: O-1
*Thick: 1/2
*Width: 6
Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock
*Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis
*Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools
*Width +.010/.015
*Thickness +10.010/.015
*Squareness edge to surface .003 per inch of thickness
*Finish 10-25 micro inches
Shipping Info:
*Actual Weight - 15.8800
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
37/64″ Dia. × 5.55 mm Shank × 83 mm Flute Length × 133 mm OAL, 5xD, TiAlN, 2xD Flute, H6 Solid Carbide Drill
Item #: TP45HP2555780
Brand: OSG USA, Inc.
Model #: HP255-5780
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 37/64″ |
| Shank Type | H6 |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 37/64″ |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.5781″ |
| Tool Type | Solid Carbide |
| Length Group | 5xD |
| Measurement Type | Inch |
| Coating | EgiAs |
| Series/List # | HP255 |
| Applicable Material | Steel | Stainless Steel | Aluminum / Non-Ferrous Materials | Super-Alloys / Titanium | Hard Materials |
| Usable Length (LU) | 83 mm |
| Connection Diameter Machine Side (DCONMS) | 5.55 mm |
| Length Chip Flute (LCF) | 83 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Overall Length (OAL) | 133 mm |
| Point Angle (SIG) | 140 Degrees |
| Flute Count (NOF) | 2 |
| Functional Length (LF) | 83 mm |
| Cutting Direction (HAND) | Right Hand |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4-14 NPT REK.2D-VA Tap
Item #: ER4513568
Brand: EMUGE-FRANKEN
Model #: CW4830005768
| Product Specifications | |
|---|---|
| Tool Type | Pipe Tap |
| Coolant Supply Property (CSP) | External |
| Thread Diameter Size (TDZ) | 3/4″ |
| Cutting Direction (HAND) | Right Hand |
| Threads per Inch (TPI) | 14 |
| Applicable Material | Steel | Stainless Steel |
| Thread Standard | NPT |
| Chamfer | 2P-3P |
| Flute Helix Angle (FHA) | 15 Degrees |
| Coating | Bright |
| Overall Length (OAL) | 5.512″ |
| Cutting Edge Material | HSSE |
| Thread Cutting Part Length (THL) | 1.38″ |
| Measurement Type | Fractional |
| Connection Diameter Machine Side (DCONMS) | 0.906″ |
| Standard | ANSI |
| Flute Type | Spiral |
| Thread Size | 3/4″ - 14 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4-14 NPTF REK.D-VA Tap
Item #: ER4510517
Brand: EMUGE-FRANKEN
Model #: AW4830005787
| Product Specifications | |
|---|---|
| Tool Type | Pipe Tap |
| Coolant Supply Property (CSP) | External |
| Thread Diameter Size (TDZ) | 3/4″ |
| Cutting Direction (HAND) | Right Hand |
| Threads per Inch (TPI) | 14 |
| Applicable Material | Steel | Stainless Steel |
| Thread Standard | NPTF |
| Chamfer | 2P-3P |
| Flute Helix Angle (FHA) | 15 Degrees |
| Coating | Bright |
| Overall Length (OAL) | 3-1/4″ |
| Cutting Edge Material | HSSE |
| Thread Cutting Part Length (THL) | 1.38″ |
| Measurement Type | Fractional |
| Connection Diameter Machine Side (DCONMS) | 0.906″ |
| Standard | ANSI |
| Flute Type | Spiral |
| Thread Size | 3/4″ - 14 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
6.4 mm Dia. × 8 mm Shank × 53 mm Flute Length × 91 mm OAL, 5xD, 145°, TA, 2 Flute, External, Round Solid Carbide Drill
Item #: DD9164136
Brand: KYOCERA SGS Precision Tools
Model #: 64136
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 6.4 mm |
| Tool Type | Drill |
| Decimal Equivalent | 0.252″ |
| Length Below Shank | 36 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 6.4 mm |
| Flute Type | Spiral |
| Length Group | 5xD |
| Measurement Type | Metric |
| Coating | TA |
| Series/List # | 135L |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Usable Length (LU) | 43 mm |
| Coolant Supply Property (CSP) | External |
| Length Chip Flute (LCF) | 53 mm |
| Point Angle (SIG) | 145 Degrees |
| Overall Length (OAL) | 91 mm |
| Flute Helix Angle (FHA) | 32 Degrees |
| Flute Count (NOF) | 2 |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/8 End Mill 4FL .040R TX - Z-CARB ZAP 5/8x1-1/4x3-1/2
Item #: DD9236861
Brand: KYOCERA SGS Precision Tools
Model #: 36861
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Usable Length (LU) | 2-1/4″ |
| Overall Length (OAL) | 3-1/2″ |
| Corner Radius (RE) | 0.04″ |
| Cutting Edge Material | Carbide |
| Flute Type | Spiral |
| Coating | AlTiN |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.625″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/8 End Mill 4FL .040R TA - Z-CARB HTA 5/8x1-1/4x3-1/2
Item #: DD9236576
Brand: KYOCERA SGS Precision Tools
Model #: 36576
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Usable Length (LU) | 2-1/4″ |
| Overall Length (OAL) | 3-1/2″ |
| Corner Radius (RE) | 0.04″ |
| Cutting Edge Material | Carbide |
| Flute Type | Spiral |
| Coating | TA |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.625″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
6.7 mm Dia. × 8 mm Shank × 53 mm Flute Length × 91 mm OAL, 5xD, 145°, TA, 2 Flute, External, Round Solid Carbide Drill
Item #: DD9164139
Brand: KYOCERA SGS Precision Tools
Model #: 64139
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 6.7 mm |
| Tool Type | Drill |
| Decimal Equivalent | 0.2638″ |
| Length Below Shank | 36 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 6.7 mm |
| Flute Type | Spiral |
| Length Group | 5xD |
| Measurement Type | Metric |
| Coating | TA |
| Series/List # | 135L |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Usable Length (LU) | 43 mm |
| Coolant Supply Property (CSP) | External |
| Length Chip Flute (LCF) | 53 mm |
| Point Angle (SIG) | 145 Degrees |
| Overall Length (OAL) | 91 mm |
| Flute Helix Angle (FHA) | 32 Degrees |
| Flute Count (NOF) | 2 |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
6.9 mm Dia. × 8 mm Shank × 53 mm Flute Length × 91 mm OAL, 5xD, 145°, TA, 2 Flute, External, Round Solid Carbide Drill
Item #: DD9164141
Brand: KYOCERA SGS Precision Tools
Model #: 64141
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 6.9 mm |
| Tool Type | Drill |
| Decimal Equivalent | 0.2717″ |
| Length Below Shank | 36 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 6.9 mm |
| Flute Type | Spiral |
| Length Group | 5xD |
| Measurement Type | Metric |
| Coating | TA |
| Series/List # | 135L |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Usable Length (LU) | 43 mm |
| Coolant Supply Property (CSP) | External |
| Length Chip Flute (LCF) | 53 mm |
| Point Angle (SIG) | 145 Degrees |
| Overall Length (OAL) | 91 mm |
| Flute Helix Angle (FHA) | 32 Degrees |
| Flute Count (NOF) | 2 |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
6.6 mm Dia. × 8 mm Shank × 53 mm Flute Length × 91 mm OAL, 5xD, 145°, TA, 2 Flute, External, Round Solid Carbide Drill
Item #: DD9164138
Brand: KYOCERA SGS Precision Tools
Model #: 64138
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 6.6 mm |
| Tool Type | Drill |
| Decimal Equivalent | 0.2598″ |
| Length Below Shank | 36 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 6.6 mm |
| Flute Type | Spiral |
| Length Group | 5xD |
| Measurement Type | Metric |
| Coating | TA |
| Series/List # | 135L |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Usable Length (LU) | 43 mm |
| Coolant Supply Property (CSP) | External |
| Length Chip Flute (LCF) | 53 mm |
| Point Angle (SIG) | 145 Degrees |
| Overall Length (OAL) | 91 mm |
| Flute Helix Angle (FHA) | 32 Degrees |
| Flute Count (NOF) | 2 |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7.1 mm Dia. × 8 mm Shank × 53 mm Flute Length × 91 mm OAL, 5xD, 145°, TA, 2 Flute, External, Round Solid Carbide Drill
Item #: DD9164143
Brand: KYOCERA SGS Precision Tools
Model #: 64143
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 7.1 mm |
| Tool Type | Drill |
| Decimal Equivalent | 0.2795″ |
| Length Below Shank | 36 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 7.1 mm |
| Flute Type | Spiral |
| Length Group | 5xD |
| Measurement Type | Metric |
| Coating | TA |
| Series/List # | 135L |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Usable Length (LU) | 43 mm |
| Coolant Supply Property (CSP) | External |
| Length Chip Flute (LCF) | 53 mm |
| Point Angle (SIG) | 145 Degrees |
| Overall Length (OAL) | 91 mm |
| Flute Helix Angle (FHA) | 32 Degrees |
| Flute Count (NOF) | 2 |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
6.8 mm Dia. × 8 mm Shank × 53 mm Flute Length × 91 mm OAL, 5xD, 145°, TA, 2 Flute, External, Round Solid Carbide Drill
Item #: DD9164140
Brand: KYOCERA SGS Precision Tools
Model #: 64140
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 6.8 mm |
| Tool Type | Drill |
| Decimal Equivalent | 0.2677″ |
| Length Below Shank | 36 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 6.8 mm |
| Flute Type | Spiral |
| Length Group | 5xD |
| Measurement Type | Metric |
| Coating | TA |
| Series/List # | 135L |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Usable Length (LU) | 43 mm |
| Coolant Supply Property (CSP) | External |
| Length Chip Flute (LCF) | 53 mm |
| Point Angle (SIG) | 145 Degrees |
| Overall Length (OAL) | 91 mm |
| Flute Helix Angle (FHA) | 32 Degrees |
| Flute Count (NOF) | 2 |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| Cutting Edge Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.4950″ Cutter Diameter × 0.8750″ (7/8″) Length of Cut Carbide Multi-Form 1/2″, 3/4″-14 NPT Thread Milling Cutter, 4 Flutes, AlTiN Coated
Item #: GE9070226C3
Brand: Harvey Tool
Model #: 70226-C3
| Product Specifications | |
|---|---|
| Thread Size | 1/2 |3/4 |
| Shank Type | Round |
| Threads per Inch (TPI) | 14 |
| Coating | AlTiN |
| Thread Standard | NPT |
| Flute Helix Angle (FHA) | 60 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Cutting Edge Material | Carbide |
| Cutting Diameter (DC) | 0.495″ |
| Usable Length (LU) | 7/8″ |
| Overall Length (OAL) | 3-1/2″ |
| Measurement Type | Fractional |
| Flute Count (NOF) | 4 |
| Tool Type | Multi-Form |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/8 End Mill 4FL .125R TX - Z-CARB ZAP 5/8x1-1/4x3-1/2
Item #: DD9236733
Brand: KYOCERA SGS Precision Tools
Model #: 36733
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Usable Length (LU) | 2-1/2″ |
| Overall Length (OAL) | 3-1/2″ |
| Corner Radius (RE) | 1/8″ |
| Cutting Edge Material | Carbide |
| Flute Type | Spiral |
| Coating | AlTiN |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.625″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
6-32 3 Flute Solid Thread Mill-TiAlN
Item #: BA12B71000
Brand: Bassett
Model #: B71000
| Product Specifications | |
|---|---|
| Thread Size | #6 |
| Shank Type | Round |
| Threads per Inch (TPI) | 32 |
| Coating | TiAlN |
| Thread Standard | NC |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 0.218″ |
| Cutting Diameter (DC) | 0.095″ |
| Series/List # | TM |
| Overall Length (OAL) | 2″ |
| Measurement Type | Wire Gage |
| Flute Count (NOF) | 3 |
| Tool Type | Thread Mill |
| Coolant Supply Property (CSP) | External |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
M4.5x0.75 3 Flute Solid Thread Mill-TiAlN
Item #: BA12B71071
Brand: Bassett
Model #: B71071
| Product Specifications | |
|---|---|
| Thread Size | M4.5 |
| Shank Type | Round |
| Thread Pitch (TP) | 0.75 mm |
| Coating | TiAlN |
| Thread Standard | Metric |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 3.17 mm |
| Usable Length (LU) | 6.35 mm |
| Cutting Diameter (DC) | 3.05 mm |
| Series/List # | TMM |
| Overall Length (OAL) | 50.8 mm |
| Measurement Type | Metric |
| Flute Count (NOF) | 3 |
| Tool Type | Thread Mill |
| Coolant Supply Property (CSP) | External |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It