BES Up To 2022 $100-$250 Products - (25001 Products)
BT40 1/2 x 3.54 - Shrink Fit Tool Holder
Item #: GM94BT40503549
Manufacturer: Parlec
Mfg #: BT40-50SF3
Technical Specifications:
*Bore Diameter: 1/2
*Brand Name: Parlec
*Gage Length: 3.540
*Model Number: BT40-50SF354-9
*Shank: BT40
*Standard: DIN
Description:
*Shrink Fit Tool Holder
*Improved concentricity
*Improved balance design with no moving pieces
*Low Centrifugal Forces due to low holder mass
*For maximum gripping power with exceptional concentricity
*Concentricity of .0001" with tool shrunk in holder
*Chip load distributed evenly along cutting edge of tool which results in longer tool life
*Constructed of double tempered Tool Steel for exceptional durability and cycle life
*With proper use, toolholder life should exceed that of standard end mill holders
*Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force
*Short projections are possible because no mechanical clamping devices are used
*This results in greater rigidity and resistance to bending
*Simple and fast to use
*The total time elapsed to remove one cutting tool and insert another is less than 10 seconds
*Through-spindle coolant capability
*Coolant through holders require no special backup screws or seals
*The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves
*The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use
Shipping Info:
*Actual Weight - 3.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT40 5/8 x 3.54 - Shrink Fit Tool Holder
Item #: GM94BT40623549
Manufacturer: Parlec
Mfg #: BT40-62SF3
Technical Specifications:
*Bore Diameter: 5/8
*Brand Name: Parlec
*Gage Length: 3.540
*Model Number: BT40-62SF354-9
*Shank: BT40
*Standard: DIN
Description:
*Shrink Fit Tool Holder
*Improved concentricity
*Improved balance design with no moving pieces
*Low Centrifugal Forces due to low holder mass
*For maximum gripping power with exceptional concentricity
*Concentricity of .0001" with tool shrunk in holder
*Chip load distributed evenly along cutting edge of tool which results in longer tool life
*Constructed of double tempered Tool Steel for exceptional durability and cycle life
*With proper use, toolholder life should exceed that of standard end mill holders
*Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force
*Short projections are possible because no mechanical clamping devices are used
*This results in greater rigidity and resistance to bending
*Simple and fast to use
*The total time elapsed to remove one cutting tool and insert another is less than 10 seconds
*Through-spindle coolant capability
*Coolant through holders require no special backup screws or seals
*The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves
*The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use
Shipping Info:
*Actual Weight - 3.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT40 3/8 x 3.54 - Shrink Fit Tool Holder
Item #: GM94BT40383549
Manufacturer: Parlec
Mfg #: BT40-38SF3
Technical Specifications:
*Bore Diameter: 3/8
*Brand Name: Parlec
*Gage Length: 3.540
*Model Number: BT40-38SF354-9
*Shank: BT40
*Standard: DIN
Description:
*Shrink Fit Tool Holder
*Improved concentricity
*Improved balance design with no moving pieces
*Low Centrifugal Forces due to low holder mass
*For maximum gripping power with exceptional concentricity
*Concentricity of .0001" with tool shrunk in holder
*Chip load distributed evenly along cutting edge of tool which results in longer tool life
*Constructed of double tempered Tool Steel for exceptional durability and cycle life
*With proper use, toolholder life should exceed that of standard end mill holders
*Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force
*Short projections are possible because no mechanical clamping devices are used
*This results in greater rigidity and resistance to bending
*Simple and fast to use
*The total time elapsed to remove one cutting tool and insert another is less than 10 seconds
*Through-spindle coolant capability
*Coolant through holders require no special backup screws or seals
*The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves
*The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use
Shipping Info:
*Actual Weight - 3.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT50 EM 25X115 END MILL HLDR
Item #: EH4529009
Manufacturer: Iscar
Mfg #: 4529009
Technical Specifications:
*Brand Name: Iscar
Description:
Shipping Info:
*Actual Weight - 11.5280
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT50 EM 25X115 E END MILL HLDR
Item #: EH4511528
Manufacturer: Iscar
Mfg #: 4511528
Technical Specifications:
*Brand Name: Iscar
Description:
Shipping Info:
*Actual Weight - 11.6180
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT50 1 x 4-1/2 End Mill Holder
Item #: GM604590426
Manufacturer: ETM
Mfg #: 4590426
Technical Specifications:
*Brand Name: ETM
*Gage Length: 4.500
*Model Number: 4590426
*Nose: 2.550
*Shank: BT50
*Size: 1
*Type: V-Flange End Mill Holder
*Weight: 10.92 lbs
Description:
*Endmill Holder
*Run out accurace .0002"
*Taper class AT3
*Hardness 58-60 HRc
*NS Taper Finish
Shipping Info:
*Actual Weight - 11.5210
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT40 SLN 1-3 9/16 - End Mill Holder with Coolant
Item #: TE12171401F
Manufacturer: Techniks
Mfg #: 17140-1F
Technical Specifications:
*Bore: 1.0
*Bore ID: 1.0"
*Brand Name: Techniks
*Coolant Supply: Thru-Flange and Thru-Spindle
*Gage Length: 3.560
*Nose: 2.000
*Shank: 1
*Size: 1
*Style: Single-Ended
*Type: CoolFLEX (DIN B)
Description:
*Techniks Precision CoolFLEX End Mill Holders offer coolant capability either through the spindle or through the flange (DIN B)
*Techniks End Mills offer an Industry Leading H5 bore tolerance to increase tool life. The holders are balanced to 10,000 RPMS and are individually tested in a lab to ensure quality
Shipping Info:
*Actual Weight - 1.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
391501 FIXTURE
Item #: FF8328401
Manufacturer: Sandvik Coromant
Mfg #: 5759633
Technical Specifications:
*Brand Name: Sandvik Coromant
Description:
Shipping Info:
*Actual Weight - 12.6091
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
C3PHT01 POLYGON HOLDING TOOL
Item #: FF8634014
Manufacturer: Sandvik Coromant
Mfg #: 5726881
Technical Specifications:
*Brand Name: Sandvik Coromant
Description:
Shipping Info:
*Actual Weight - .1236
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7716CG-6-031 5/16 TAP ADPT 770
Item #: GM957716CG6031
Manufacturer: Parlec
Mfg #: 7716CG-6-0
Technical Specifications:
*Brand Name: Parlec
Description:
Shipping Info:
*Actual Weight - .0900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7717CG-6-050 1/2 PIPE TAP ADPT 770
Item #: GM957717CG6050
Manufacturer: Parlec
Mfg #: 7717CG-6-0
Technical Specifications:
*Brand Name: Parlec
Description:
Shipping Info:
*Actual Weight - .0900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2 Pipe No. 2 Rigid Adj Length Tap Adapter
Item #: GM2622302804
Manufacturer: Bilz
Mfg #: 22302804
Technical Specifications:
*Adaptor Size: 2
*Brand Name: Bilz
*Shank Size: .688
*Square: .515
*Tap Range (Pipe): 1/2 NPT
*Type: Posi-Drive
Description:
Shipping Info:
*Actual Weight - 1.5000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7716CG-6-037 3/8 TAP ADPT 770
Item #: GM957716CG6037
Manufacturer: Parlec
Mfg #: 7716CG-6-0
Technical Specifications:
*Brand Name: Parlec
Description:
Shipping Info:
*Actual Weight - .0900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7716CG-6-062 5/8 TAP ADPT 770
Item #: GM957716CG6062
Manufacturer: Parlec
Mfg #: 7716CG-6-0
Technical Specifications:
*Brand Name: Parlec
Description:
Shipping Info:
*Actual Weight - .0900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7716CG-6-050 1/2 TAP ADPT 770
Item #: GM957716CG6050
Manufacturer: Parlec
Mfg #: 7716CG-6-0
Technical Specifications:
*Brand Name: Parlec
Description:
Shipping Info:
*Actual Weight - .0900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
M 20X1.5-6HX REK.2A-H-IKZ TICN
Item #: ER4514581
Brand: EMUGE-FRANKEN
Model #: C1959101.0422
| Product Specifications | |
|---|---|
| Thread Diameter Size (TDZ) | M20 |
| Standard | DIN |
| Thread Pitch (TP) | 1.5 mm |
| Tool Type | Rekord A-H |
| Thread Standard | Metric |
| Chamfer | 2P-3P |
| Overall Length (OAL) | 125 mm |
| Coating | TiCN |
| Connection Diameter Machine Side (DCONMS) | 16 mm |
| Flute Type | Straight |
| Flute Helix Angle (FHA) | 0 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Applicable Material | Cast Iron | Hard Materials |
| Coolant Supply Property (CSP) | Coolant Thru |
| Cutting Edge Material | HSSE |
| Series/List # | 1959101 |
| Thread Tolerance Class (TCTR) | 6HX |
| Thread Size | M20 × 1.5 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
12251234000 W TOOLHOLDER
Item #: WK532021723
Brand: Widia
Model #: 2021723
| Product Specifications | |
|---|---|
| Shank Height (H) | 40 mm |
| Prism Height (HTPRM) | 52.5 mm |
| Shank Width (B) | 40 mm |
| Coolant Supply Property (CSP) | External |
| Overall Length (OAL) | 160mm |
| Cutting Direction (HAND) | Neutral |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/8 End Mill 4FL SQ TX - SER 07S 5/8x5/8x2-1/4x5
Item #: DD9270484
Brand: KYOCERA SGS Precision Tools
Model #: 70484
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| End Shape | Square |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Usable Length (LU) | 2-3/4″ |
| Depth of Cut Maximum (APMX) | 2-1/4″ |
| Corner Radius (RE) | None |
| Overall Length (OAL) | 5″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | AlTiN |
| Decimal Equivalent | 0.625″ |
| Flute Count (NOF) | 4 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 38 Degrees |
| Series/List # | 07S |
| Shank Type | Round |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3M Cloth Belt 370DZ P100 Y-weight 43″ × 60″ Film-lok Single-flex
Item #: TM107010515848
Brand: 3M
Model #: 00638060693872
| Product Specifications | |
|---|---|
| Width | 43″ |
| Backing Material | Cloth |
| Length | 60″ |
| Backing Weight | Y Weight |
| Abrasive Material | Aluminum Oxide |
| Color | Brown |
| Grit | P100 |
| Series | 370DZ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-1/8-12 UNF 4 Flute H4 Bottoming HSS Standard Straight Flute Hand Tap- Bright
Item #: VT10308473
Brand: Greenfield Threading
Model #: 308473
| Product Specifications | |
|---|---|
| Thread Diameter Size (TDZ) | 1-1/8″ |
| Chamfer | Bottoming |
| Threads per Inch (TPI) | 12 |
| Coating | Bright |
| Thread Standard | NF |
| Flute Type | Straight |
| Overall Length (OAL) | 5-7/16″ |
| End Shape | Square |
| Thread Cutting Part Length (THL) | 2-9/16″ |
| Style | Bottoming |
| Connection Diameter Machine Side (DCONMS) | 0.896″ |
| Shank Type | Round w/ Drive Square |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Application | General Purpose |
| Length Group | 2D |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials |
| Measurement Type | Inch |
| Cutting Edge Material | HSS |
| Series/List # | HTGP |
| Thread Tolerance Class (TCTR) | H4 | 2B |
| Thread Size | 1-1/8″ - 12 |
| Tool Type | Hand Tap |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It