#68 RHS / RHC HSS 118 Degree Radial Point General Purpose Taper Length Drill - Steam Oxide

Item #: CH1850358
Brand: Chicago-Latrobe
Model #: 50358

#68 RHS / RHC HSS 118 Degree Radial Point Slow Spiral Jobber Drill - Bright

Item #: CH1046338
Brand: Chicago-Latrobe
Model #: 46338

#68 RHS / RHC HSS 135 Degree Split Point Heavy Duty Jobber Drill - Steam Oxide

Item #: CH1044738
Brand: Chicago-Latrobe
Model #: 44738

#68 RHS / RHC HSS 135 Degree Split Point Heavy Duty Jobber Drill - TiN

Item #: CH1041738
Brand: Chicago-Latrobe
Model #: 41738

#68 RHS / RHC HSS 135 Degree Split Point Heavy Duty Jobber Drill - TiN

Item #: CH1041738
Brand: Chicago-Latrobe
Model #: 41738

#68 Size - 1/8" Shank - 4" OAL - Drill Extention

Item #: EX6596043
Manufacturer: Whitney Tool
Mfg #: 96043

Technical Specifications:
•Brand Name: Whitney Tool •Overall Length: 4 •Shank Diameter: 1/8 •Size: # 68

Description:
•Drill Extensions •Miniature drill extensions •1/8" & 3/16" Diameter extensions •#80 Drill size thru 1/16" •Slim profile allows you to reach tight places •The extension gives you added reaches for small size drills •Integral compression collet lets you change drills easily

Shipping Info:
•Actual Weight - .0140

#68 Size - 3/16" Shank - 4" OAL - Drill Extention

Item #: EX6596070
Manufacturer: Whitney Tool
Mfg #: 96070

Technical Specifications:
•Brand Name: Whitney Tool •Overall Length: 4 •Shank Diameter: 3/16 •Size: # 68

Description:
•Drill Extensions •Miniature drill extensions •1/8" & 3/16" Diameter extensions •#80 Drill size thru 1/16" •Slim profile allows you to reach tight places •The extension gives you added reaches for small size drills •Integral compression collet lets you change drills easily

Shipping Info:
•Actual Weight - .0300

#68 TruSize Carbide Reamer Straight Flute

Item #: BG7001089
Manufacturer: M A Ford
Mfg #: 27203100

Technical Specifications:
•Brand Name: M A Ford •Decimal Equivalent: .0310 •Flute Length: 1/4 •Flute Type: Straight Flute •List No.: 272 •Material: Carbide •Model Number: 27203100 •Number of Flutes: 4 •Overall Length: 1-1/2 •Shank Diameter: .031 •Shank Type: Straight Shank •Size: 68 •Size Type: Wire Gage Size •Trade Name: TrueSize®

Description:


Shipping Info:
•Actual Weight - .0005 •Dimensions - Height: .250 Length: 1.62 Width: .250

#68, 118° Drill Point, Fast Spiral Circuit Board Drill Bit 1/2″ Flute Length, 1-1/2″ OAL

Item #: 74458779
Brand: Hertel
Model #: 30003100

#6805 - 4.0 Amps - 16 Gauge Capacity in Steel - Corded Shears

Inventory In Stock - Fast Online Checkout - Same Day Shipping. 2% Off ALL Online Orders. Use Code at Checkout: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#6820 - 1/2'' Wide x 200 Feet Long - Open Reel Fiberglass Tape

Item #: KP756820
Manufacturer: Empire
Mfg #: 6820

Technical Specifications:
•Brand Name: Empire •Class: Machinist Set-Up Tools •Length: 200' •Model Number: 6820 •Trade Name: Empire •Type: Open Reel Fiberglass Tapes •Width: 1/2 Open Reel

Description:
•Heavy-duty construction •High impact resistant ABS body •Printed two sides, inch and engineer s 1/10th foot scale. •Fiberglass tape will not rot, corrode or distort •Numbers and graduations are printed in black on white blade •Yellow case with comfortable rubber hand grip

Shipping Info:
•Actual Weight - 1.9500 •Dimensions - Height: 1.50 Length: 12.1 Width: 9.50

#683-1Z Internal Chamfer Gage 0-90 Degree

Item #: MV7063684
Manufacturer: Starrett
Mfg #: 63684

Technical Specifications:
•Angle: 0-90 ID •Brand Name: Starrett •Capacity: 0 - 3/8 •Model Number: 683-1Z

Description:
•When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator •No setting master is necessary •Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face •Gages are also available with electronic indicators on request •Deluxe padded case •All ground surfaces are of hardened tool steel indicators are AGD design

Shipping Info:
•Actual Weight - 1.6000

#683-2Z Internal Chamfer Gage 0-90 Degree

Item #: MV7063685
Manufacturer: Starrett
Mfg #: 63685

Technical Specifications:
•Angle: 0-90 ID •Brand Name: Starrett •Capacity: 0 - 1/2 •Model Number: 683-2Z

Description:
•When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator •No setting master is necessary •Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face •Gages are also available with electronic indicators on request •Deluxe padded case •All ground surfaces are of hardened tool steel indicators are AGD design

Shipping Info:
•Actual Weight - 1.7000

#683-3Z Internal Chamfer Gage 0-90 Degree

Item #: MV7063686
Manufacturer: Starrett
Mfg #: 63686

Technical Specifications:
•Angle: 0-90 ID •Brand Name: Starrett •Capacity: 0 - 1 •Model Number: 683-3Z

Description:
•When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator •No setting master is necessary •Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face •Gages are also available with electronic indicators on request •Deluxe padded case •All ground surfaces are of hardened tool steel •Indicators are AGD design

Shipping Info:
•Actual Weight - 1.7500 •Dimensions - Height: 2.30 Length: 7.70 Width: 5.40

#683-4Z Internal Chamfer Gage 0-90 Degree

Item #: MV7063687
Manufacturer: Starrett
Mfg #: 63687

Technical Specifications:
•Angle: 0-90 ID •Brand Name: Starrett •Capacity: 1 - 2 •Model Number: 683-4Z

Description:
•When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator •No setting master is necessary •Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face •Gages are also available with electronic indicators on request •Deluxe padded case •All ground surfaces are of hardened tool steel •Indicators are AGD design

Shipping Info:
•Actual Weight - 2.3000

#6830 - 1/2'' Wide x 300 Feet Long - Open Reel Fiberglass Tape

Item #: KP756830
Manufacturer: Empire
Mfg #: 6830

Technical Specifications:
•Brand Name: Empire •Class: Machinist Set-Up Tools •Length: 300' •Model Number: 6830 •Trade Name: Empire •Type: Open Reel Fiberglass Tapes •Width: 1/2 Open Reel

Description:
•Heavy-duty construction •High impact resistant ABS body •Printed two sides, inch and engineer s 1/10th foot scale. •Fiberglass tape will not rot, corrode or distort •Numbers and graduations are printed in black on white blade •Yellow case with comfortable rubber hand grip

Shipping Info:
•Actual Weight - 2.7500 •Dimensions - Height: 1.00 Length: 16.0 Width: 12.0

#684-1Z Internal Chamfer Gage 0-127 Degree

Item #: MV7063688
Manufacturer: Starrett
Mfg #: 63688

Technical Specifications:
•Angle: 90-127 ID •Brand Name: Starrett •Capacity: 0 - 3/8 •Model Number: 684-1Z

Description:
•When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator •No setting master is necessary •Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face •Gages are also available with electronic indicators on request •Deluxe padded case •All ground surfaces are of hardened tool steel indicators are AGD design

Shipping Info:
•Actual Weight - 1.7000

#684-2Z Internal Chamfer Gage 0-127 Degree

Item #: MV7063689
Manufacturer: Starrett
Mfg #: 63689

Technical Specifications:
•Angle: 90-127 ID •Brand Name: Starrett •Capacity: 0 - 1/2 •Model Number: 684-2Z

Description:
•When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator •No setting master is necessary •Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face •Gages are also available with electronic indicators on request •Deluxe padded case •All ground surfaces are of hardened tool steel •Indicators are AGD design

Shipping Info:
•Actual Weight - 1.8000

#684-3Z Internal Chamfer Gage 0-127 Degree

Item #: MV7063690
Manufacturer: Starrett
Mfg #: 63690

Technical Specifications:
•Angle: 90-127 ID •Brand Name: Starrett •Capacity: 0 - 1 •Model Number: 684-3Z

Description:
•When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator •No setting master is necessary •Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face •Gages are also available with electronic indicators on request •Deluxe padded case •All ground surfaces are of hardened tool steel •Indicators are AGD design

Shipping Info:
•Actual Weight - 1.8000

#684-4Z Internal Chamfer Gage 0-127 Degree

Item #: MV7063691
Manufacturer: Starrett
Mfg #: 63691

Technical Specifications:
•Angle: 90-127 ID •Brand Name: Starrett •Capacity: 1 - 2 •Model Number: 684-4Z

Description:
•When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator •No setting master is necessary •Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face •Gages are also available with electronic indicators on request •Deluxe padded case •All ground surfaces are of hardened tool steel indicators are AGD design

Shipping Info:
•Actual Weight - 2.3000