Email: sales@benchmarktooling.com | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

Products - (25001 Products)

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - Benchmark Tooling

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 42507871
Brand: Rong Fu
Model #: 0954291/4244015
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 1
Table Length (Inch) 28-3/4
Table Width (Inch) 8-1/4
Longitudinal Travel (Inch) 18-1/8
Cross Travel (Inch) 9
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 50.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1180
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (Inch) 38.1000
Drilling Capacity in Steel (Decimal Inch) 1.5000
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Quill Diameter (Decimal Inch) 4.5270
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Inch) 10.2360
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 90.00
Horsepower (HP) 1.00
Voltage 220
Includes AL-500D Power Feed (MSC 41046715); Newall DP500 (MSC 42440156); Stand (MSC 09519919)

$6,988.55

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - Benchmark Tooling

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 09542911
Brand: Rong Fu
Model #: RF-40/1 M
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 1
Table Length (Inch) 28-3/4
Table Width (Inch) 8-1/4
Longitudinal Travel (Inch) 18-1/8
Cross Travel (Inch) 9
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 50.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1181
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (mm) 38.10
Drilling Capacity in Steel (Inch) 1-1/2
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Quill Diameter (Decimal Inch) 4.5276
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Decimal Inch) 10.2362
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 90.00
Horsepower (HP) 1.00
Voltage 220

$5,467.39

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - Benchmark Tooling

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 42507897
Brand: Rong Fu
Model #: 0954291/4244018
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 1
Table Length (Inch) 28-3/4
Table Width (Inch) 8-1/4
Longitudinal Travel (Inch) 18-1/8
Cross Travel (Inch) 9
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 50.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1180
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (Inch) 38.1000
Drilling Capacity in Steel (Decimal Inch) 1.5000
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Quill Diameter (Decimal Inch) 4.5270
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Inch) 10.2360
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 90.00
Horsepower (HP) 1.00
Voltage 220
Includes AL-500D Power Feed (MSC 41046715); Newall DP500 (MSC 42440180); Stand (MSC 09519919)

$7,473.17

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - Benchmark Tooling

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 42508051
Brand: Rong Fu
Model #: 6085928/4244015
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 1
Table Length (Inch) 32
Table Width (Inch) 9-3/8
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1180
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (Inch) 38.1000
Drilling Capacity in Steel (Decimal Inch) 1.5000
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Inch) 10.0390
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 30.00
Horsepower (HP) 1.00
Voltage 220
Includes AL-500D Power Feed (MSC 41046715); Newall DP500 (MSC 42440156); Stand (MSC 09519919)

$8,593.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - Benchmark Tooling

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 42507939
Brand: Rong Fu
Model #: 6085928/4244018
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 1
Table Length (Inch) 32
Table Width (Inch) 9-3/8
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1181
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (mm) 38.10
Drilling Capacity in Steel (Inch) 1-1/2
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Decimal Inch) 10.0390
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 30.00
Horsepower (HP) 1.00
Voltage 220
Includes AL-500D Power Feed (MSC 41046715); Newall DP500 (MSC 42440180); Stand (MSC 09519919)

$9,078.49

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - Benchmark Tooling

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 60859287
Brand: Rong Fu
Model #: RF-45N2F
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 1
Table Length (Inch) 32
Table Width (Inch) 9-3/8
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1181
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (mm) 38.10
Drilling Capacity in Steel (Inch) 1-1/2
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Decimal Inch) 10.0394
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 30.00
Horsepower (HP) 1.00
Voltage 220

$7,347.98

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 1 Phase, Step Pulley Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 7-1/2" Cross Travel, 12 Spindle Speeds, 1.5 hp, 110/220 Volts - Benchmark Tooling

Rong Fu - 1 Phase, Step Pulley Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 7-1/2" Cross Travel, 12 Spindle Speeds, 1.5 hp, 110/220 Volts


Item #: 00685420
Brand: Rong Fu
Model #: RF-31/1
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Step Pulley
Phase 1
Table Length (Inch) 28-3/4
Table Width (Inch) 8-1/4
Longitudinal Travel (Inch) 18-1/8
Cross Travel (Inch) 7-1/2
Number of Spindle Speeds 12
Minimum Spindle Speed (RPM) 125.00
Maximum Spindle Speed (RPM) 3000.00
Spindle Travel Length (mm) 127.00
Spindle Travel Length (Inch) 5
Spindle Taper Size R8
Drilling Capacity in Steel (mm) 31.75
Drilling Capacity in Steel (Inch) 1-1/4
Drilling Capacity in Cast Iron (mm) 31.75
Drilling Capacity in Cast Iron (Inch) 1-1/4
Tapping Capacity in Steel (mm) 15.88
Tapping Capacity in Steel (Inch) 5/8
Quill Diameter (Decimal Inch) 4.5276
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Decimal Inch) 8.0709
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Head Swivel (Degrees) 360.00
Horsepower (HP) 1.50
Voltage 110/220

$4,934.78

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 3 Phase, 16-3/8" Swing, Step Pulley Mill Drill Machine - 28-1/2" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 6-1/4" Cross Travel, 12 Spindle Speeds, 1 hp, 230 Volts - Benchmark Tooling

Rong Fu - 3 Phase, 16-3/8" Swing, Step Pulley Mill Drill Machine - 28-1/2" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 6-1/4" Cross Travel, 12 Spindle Speeds, 1 hp, 230 Volts


Item #: 01241512
Brand: Rong Fu
Model #: ***BDS ITEM***
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. Three-phase lines provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Step Pulley
Swing Distance (Inch) 16-3/8
Phase 3
Table Length (Inch) 28-1/2
Table Width (Inch) 8-1/4
Longitudinal Travel (Inch) 18-1/8
Cross Travel (Inch) 6-1/4
Number of Spindle Speeds 12
Minimum Spindle Speed (RPM) 120.00
Maximum Spindle Speed (RPM) 2500.00
Spindle Taper Size R8
Horsepower (HP) 1.00
Voltage 230
Includes Stand (MSC 09519919)

$3,382.61

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 3 Phase, 16-3/8" Swing, Step Pulley Mill Drill Machine - 28-1/2" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 6-1/4" Cross Travel, 23 Spindle Speeds, 1 hp, 230 Volts - Benchmark Tooling

Rong Fu - 3 Phase, 16-3/8" Swing, Step Pulley Mill Drill Machine - 28-1/2" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 6-1/4" Cross Travel, 23 Spindle Speeds, 1 hp, 230 Volts


Item #: 01241546
Brand: Rong Fu
Model #: ***BDS ITEM***
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. Three-phase lines provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Step Pulley
Swing Distance (Inch) 16-3/8
Phase 3
Table Length (Inch) 28-1/2
Table Width (Inch) 8-1/4
Longitudinal Travel (Inch) 18-1/8
Cross Travel (Inch) 6-1/4
Number of Spindle Speeds 23
Minimum Spindle Speed (RPM) 120.00
Maximum Spindle Speed (RPM) 2240.00
Spindle Taper Size R8
Horsepower (HP) 1.00
Voltage 230
Includes Stank (MSC 09519919)

$3,797.57

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 3 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - Benchmark Tooling

Rong Fu - 3 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 42507889
Brand: Rong Fu
Model #: 0951291/4244015
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. Three-phase lines provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 3
Table Length (Inch) 28-3/4
Table Width (Inch) 8-1/4
Longitudinal Travel (Inch) 18-1/8
Cross Travel (Inch) 9
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 50.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1180
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (Inch) 38.1000
Drilling Capacity in Steel (Decimal Inch) 1.5000
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Quill Diameter (Decimal Inch) 4.5270
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Inch) 10.2360
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 90.00
Horsepower (HP) 1.00
Voltage 220
Includes AL-500D Power Feed (MSC 41046715); Newall DP500 (MSC 42440156); Stand (MSC 09519919)

$6,988.55

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 3 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - Benchmark Tooling

Rong Fu - 3 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 42507905
Brand: Rong Fu
Model #: 0951291/4244018
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. Three-phase lines provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 3
Table Length (Inch) 28-3/4
Table Width (Inch) 8-1/4
Longitudinal Travel (Inch) 18-1/8
Cross Travel (Inch) 9
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 50.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1180
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (Inch) 38.1000
Drilling Capacity in Steel (Decimal Inch) 1.5000
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Quill Diameter (Decimal Inch) 4.5270
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Inch) 10.2360
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 90.00
Horsepower (HP) 1.00
Voltage 220
Includes AL-500D Power Feed (MSC 41046715); Newall DP500 (MSC 42440180); Stand (MSC 09519919)

$7,473.17

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 3 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - Benchmark Tooling

Rong Fu - 3 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 09512914
Brand: Rong Fu
Model #: RF-40/3
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. Three-phase lines provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 3
Table Length (Inch) 28-3/4
Table Width (Inch) 8-1/4
Longitudinal Travel (Inch) 18-1/8
Cross Travel (Inch) 9
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 50.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1181
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (mm) 38.10
Drilling Capacity in Steel (Inch) 1-1/2
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Quill Diameter (Decimal Inch) 4.5276
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Decimal Inch) 10.2362
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 90.00
Horsepower (HP) 1.00
Voltage 220

$5,467.39

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 3 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - Benchmark Tooling

Rong Fu - 3 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 42507947
Brand: Rong Fu
Model #: 6416277/4244018
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. Three-phase lines provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 3
Table Length (Inch) 32
Table Width (Inch) 9-3/8
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1181
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (mm) 38.10
Drilling Capacity in Steel (Inch) 1-1/2
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Decimal Inch) 10.0390
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 30.00
Horsepower (HP) 1.00
Voltage 220
Includes DRO (3 Axis); Stand; X-Axis Powerfeed; Mill Drill

$8,114.29

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 3 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - Benchmark Tooling

Rong Fu - 3 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 42508044
Brand: Rong Fu
Model #: 6416277/4244015
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. Three-phase lines provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 3
Table Length (Inch) 32
Table Width (Inch) 9-3/8
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1180
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (Inch) 38.1000
Drilling Capacity in Steel (Decimal Inch) 1.5000
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Inch) 10.0390
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 30.00
Horsepower (HP) 1.00
Voltage 220
Includes AL-500D Power Feed (MSC 41046715); Newall DP500 (MSC 42440156); Stand (MSC 09519919)

$7,629.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 3 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - Benchmark Tooling

Rong Fu - 3 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 64162779
Brand: Rong Fu
Model #: RF-45/3
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. Three-phase lines provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 3
Table Length (Inch) 32
Table Width (Inch) 9-3/8
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1181
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (mm) 38.10
Drilling Capacity in Steel (Inch) 1-1/2
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Decimal Inch) 10.0394
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 30.00
Horsepower (HP) 1.00
Voltage 220

$6,217.19

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 3 Phase, Variable Speed Pulley Mill Drill Machine - 12 Spindle Speeds, 230 Volts - Benchmark Tooling

Rong Fu - 3 Phase, Variable Speed Pulley Mill Drill Machine - 12 Spindle Speeds, 230 Volts


Item #: 42507962
Brand: Rong Fu
Model #: 0068541/4244016
Exact Tooling IR#: 04

Features and Benefits

Variable speed pulleys are driven by a V-shaped belt system and a variable speed assembly that regulates an infinite speed range change by the turn of a dial.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. Three-phase lines provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Variable Speed Pulley
Phase 3
Number of Spindle Speeds 12
Spindle Taper Size R8
Voltage 230
Includes DRO (2 Axis); Stand; X-Axis Powerfeed; Mill Drill

$4,938.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - Mill Drill Machines - Exact Industrial Supply

Rong Fu - Mill Drill Machines


Item #: 00685438
Brand: Rong Fu
Model #: RF-31/3/23SP

Product Specifications

$4,416.44

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - Mill Drill Machines - Exact Industrial Supply

Rong Fu - Mill Drill Machines


Item #: 00685412
Brand: Rong Fu
Model #: RF-31/3

Product Specifications

$4,187.89

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - Milling Machine Stand for Mill Drills - 21-1/4" Long x 23-15/16" Deep x 28-3/16" High - Benchmark Tooling

Rong Fu - Milling Machine Stand for Mill Drills - 21-1/4" Long x 23-15/16" Deep x 28-3/16" High


Item #: 09519919
Brand: Rong Fu
Model #: 2423019S1
Exact Tooling IR#: 04

Product Specifications
Machine Compatibility Mill Drills
Overall Length (Inch) 21-1/4
Overall Height (Inch) 28-3/16
Overall Depth (Inch) 23-15/16

$398.22

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Roughing End Mill: 1" Dia, 5 Flute, Single End, Solid Carbide, Chipbreaker

Roughing End Mill: 1" Dia, 5 Flute, Single End, Solid Carbide, Chipbreaker


Item #: 07004906
Brand: Walter-Prototyp
Model #: 8416745

Product Specifications

Mill Diameter (Fractional Inch) 1
Number Of Flutes 5
End Mill Material Solid Carbide
Length of Cut 1-1/2
Coating/Finish TiAlN/THL
Shank Diameter (Inch) 1
Centercutting Yes
Mill Diameter (Decimal Inch) 1.0000
Shank Type Straight-Cylindrical
Extended Reach No
Variable Helix No
Chipbreaker Yes
Material Grade Solid Carbide
Single Or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Flute Type Spiral
Shank Diameter Tolerance h6
Reach Length (Decimal Inch) 1.5000
Reach Length (mm) 38.10
Series MA320.A-5
UNSPSC Code 23241614

$418.21

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It