Abrasives & Finishing Supplies - Rotating Brushes For Sale | Benchmark Tooling - (1467 Products)
Brand: Made in USA / Part #: MMX1607M12MSC-1
Item #: 75250928
Brand: Made in USA
Model #: MMX1607M12MSC-1Product Specifications
Thread Type
Male/Male
Thread Size
M5x0.80
Thread Size
M5x0.8
Material
Steel
Overall Length (mm)
6.00
Overall Length
6.0 mm
Finish
Zinc
Standards
QQ-S-633
Length Tolerance (mm)
-0.150 to 0.150
Body Length
6.00
Body Shape
Hex
System Of Measurement
Metric
Material Grade
2
Width Across Flats (mm)
8.00
Fastener Standard
QQ-S-633
Finish Coating
Zinc
Thread Length (mm)
10.00; 9.50; 9.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.045″ Dia. × 1/4″ LOC × 1/4″ Shank Size × 2-1/2″ OAL, 3 Flute, 20 Degrees Body Half Taper Angle, Carbide, AlTiN Nano, Ball, Tapered End Mill
Item #: GE90802145C6
Brand: Harvey Tool
Model #: 802145-C6
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.045″ |
| Coating | AlTiN Nano |
| Depth of Cut Maximum (APMX) | 1/4″ |
| Cutting Edge Material | Carbide |
| Flute Count (NOF) | 3 |
| End Shape | Ball |
| Corner Radius (RE) | 0.0225″ |
| Shank Type | Round |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | 5D |
| Flute Helix Angle (FHA) | 30 Degrees |
| Flute Type | Spiral |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Measurement Type | Inch |
| Body Half Taper Angle (BHTA) | 20 Degrees |
| Series/List # | Miniature End Mills |
| Point Angle (SIG) | 40 Degrees |
| Body Material | Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
22mm-4FL-SE-REG (38mm LOC) TICN
Item #: MW21206001470C
Brand: Monster Tool Company
Model #: 206-001470C
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 22 mm |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 22 mm |
| Application | | Slotting | Profiling | Rampdown | |
| Depth of Cut Maximum (APMX) | 38 mm |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 102 mm |
| Decimal Equivalent | 0.8661″ |
| Cutting Edge Material | Solid Tungsten Carbide |
| Series/List # | 206 |
| Coating | TiCN |
| Cutting Direction (HAND) | Right Hand |
| Flute Count (NOF) | 4 |
| Single / Double End | Single End |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Chamfer End Mill; 3/8″ Dia. × 9/16″ LOC × 1/2″ Shank Dia. × 4″ OAL ; 4 FL ; CBN ; Bright ; Series 2810
Item #: ER4520774
Brand: EMUGE-FRANKEN
Model #: 2810.0375
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| End Shape | Chamfer |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Application | | Finishing | |
| Depth of Cut Maximum (APMX) | 9/16″ |
| Coolant Supply Property (CSP) | External |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.375″ |
| Cutting Edge Material | CBN |
| Measurement Type | Inch |
| Coating | Bright |
| Series/List # | 2810 |
| Flute Count (NOF) | 4 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Ingersoll Cutting Tools / Part #: 6180822
Item #: 37898160
Brand: Ingersoll Cutting Tools
Model #: 6180822Product Specifications
Maximum Drill Depth
3.2800 in
Drill Depth by Diameter Ratio
3xD
Maximum Depth of Cut (Decimal Inch)
3.2800
Shank Type
Weldon Flat
Shank Diameter (Inch)
1-1/4
Cutting Direction
Right Hand
Drill Body Length to Flange (Decimal Inch)
4.8000
Toolholder Style
Q027
Nose Diameter (Decimal Inch - 4 Decimals)
1.0940
Overall Length (Decimal Inch)
7.1700
Overall Length
7.17
Through Coolant
Yes
Series
Q
Flute Length (Decimal Inch)
3.2800
Shank Length (Decimal Inch)
2.3600
Primary Workpiece Material
Universal
Primary Workpiece Material Code
O
Flute Type
Slow Spiral
Maximum Cutting Diameter (Decimal Inch)
1.0940
Number Of Flutes
2
Coolant Through
Yes
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.014″ Cutting Dia. × 1/8″ Shank Size × 0.021″ LOC × 1-1/2″ OAL, 2 Flute, Carbide, Amorphous Diamond, Ball Nose End Mill
Item #: KE11930001256
Brand: Keo
Model #: 930-001-256
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.014″ |
| Corner Radius (RE) | 0.007″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Number of Teeth | 2 |
| Depth of Cut Maximum (APMX) | 0.021″ |
| End Shape | Ball Nose |
| Overall Length (OAL) | 1-1/2″ |
| Coolant Supply Property (CSP) | External |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Amorphous Diamond |
| Cutting Direction (HAND) | Right Hand |
| Flute Count (NOF) | 2 |
| Center Cutting | Yes |
| Shank Type | Round |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/4″ × 0.125″ × 0.060R 2-Flute Carbide Corner Rounding Endmill, AlTiN
Item #: KE11932000799
Brand: Keo
Model #: 932-000-799
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Coating | AlTiN |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Flute Count (NOF) | 2 |
| Overall Length (OAL) | 2″ |
| Shank Type | Round |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) | 0.06″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Chamfer End Mill; 2 mm Dia. × 6 mm LOC × 6 mm Shank Dia. × 57 mm OAL ; 2 FL ; Carbide ; GLT ; Series 2544K
Item #: ER452544K002
Brand: EMUGE-FRANKEN
Model #: 2544K.002
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 2 mm |
| End Shape | Chamfer |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Application | | Soft Materials Finishing | |
| Depth of Cut Maximum (APMX) | 6 mm |
| Coolant Supply Property (CSP) | External |
| Overall Length (OAL) | 57 mm |
| Decimal Equivalent | 0.0787″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Metric |
| Coating | GLT |
| Series/List # | 2544K |
| Flute Count (NOF) | 2 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 1/32″ Dia. × 1/4″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 FL, Carbide, Uncoated
Item #: TA15TC53746
Brand: Titan USA
Model #: TC53746
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/32″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 1/4″ |
| Depth of Cut Maximum (APMX) | 1/4″ |
| Corner Radius (RE) | 0.0155″ |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.0313″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/4X3/8X4 2FL_ZPLUS SQ EM
Item #: HS1081332
Brand: Helical Solutions
Model #: 81332
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Neck Diameter (DN) | 0.237″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Neck Length (LN) | 1.25″ |
| Depth of Cut Maximum (APMX) | 3/8″ |
| Length Group | 1.5D |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.25″ |
| Coating | ZPLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Shank Length (LS) | 2.375″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Rocky Mountain Twist / Part #: 95008702
Item #: 95322004
Brand: Rocky Mountain Twist
Model #: 95008702Product Specifications
Drill Bit Size (Inch)
3/32
Drill Point Angle
137
Tool Material
High Speed Steel
Shank Type
Flatted
Cutting Direction
Right Hand
Point Type
Split-Point
Series
JH533-M
Drill Length Type
Maintenance Length
Flute Type
Spiral
Number Of Flats
3
Shank Diameter (Decimal Inch)
3/32
Overall Length (Inch)
2-1/4
Flute Length (Inch)
15/16
Coolant Through
No
Coating/Finish
Gold Finish
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/16″ Dia. × 3/16″ Shank Dia. × 0.035″ LOC × 2″ OAL, 2 Flute, 0.03″ Corner Radius, Carbide, AlTiN, Corner Rounding End Mill
Item #: GE90748630C3
Brand: Harvey Tool
Model #: 748630-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Usable Length (LU) | 0.035″ |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Corner Radius (RE) | 0.03″ |
| Depth of Cut Maximum (APMX) | 0.035″ |
| Tool Type | Corner Rounding End Mill |
| Overall Length (OAL) | 2″ |
| End Shape | Concave |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AlTiN |
| Series/List # | Specialty Profiles |
| Flute Count (NOF) | 2 |
| Decimal Equivalent | 0.1875″ |
| Shank Type | Round |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 4169693
Item #: 93314193
Brand: Widia
Model #: 4169693Product Specifications
Insert Style
WMTC
Insert Size Code
040N
Insert Material
Carbide
Manufacturer Grade
WU25PT
Cutting Width (Decimal Inch)
0.1570
Cutting Width (Inch)
5/32
Insert Holding Method
Clamp
Lead Angle Direction
Neutral
Insert Hand
Neutral
Lead Angle
0.000
Relief Angle
5.000
Corner Radius (mm)
0.17
Corner Radius (Decimal Inch)
0.0070
Chipbreaker
CM
Multi-use Tool
No
Cutting Tool Application
Cut-Off
Series
WMTC
Coating Process
PVD
Overall Length (Decimal Inch)
1.0000
Primary Workpiece Material
Super-alloys & Titanium
Primary Workpiece Material Code
S
Secondary Workpiece Material
Non-Ferrous Metal; Stainless Steel; Cast Iron; Steel
Secondary Workpiece Material Code
P; K; M; N
Ansi Code
WMTC040N00CMW17
Iso Code
WMTC040N00CMW17
Cutting Height (Decimal Inch)
0.1810
Manufacturers Catalog Number
WMTC040N00CMW17
Insert Seat Size
4
Cutting Direction
Neutral
Maximum Depth of Cut (Decimal Inch)
1.0000
Coating Classification
PVD
Insert Width (Decimal Inch)
0.1240
Overall Width (Decimal Inch - 4 Decimals)
0.1570
Coating/Finish
AlTiN
Single Or Double End
Double
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Ingersoll Cutting Tools / Part #: 2904245
Item #: 41483611
Brand: Ingersoll Cutting Tools
Model #: 2904245Product Specifications
Insert Style
SDES
Insert Size Code
130516
Insert Material
Carbide
Manufacturer Grade
IN4005
Inscribed Circle (mm)
13.00
Corner Radius (Inch)
1/16
Insert Hand
Neutral
Series
SDES
Coating Process
PVD
Maximum Depth of Cut (mm)
5.00
Number Of Cutting Edges
4
Insert Shape
Square
Rake
Positive
Primary Workpiece Material
Stainless Steel; Cast Iron; Super-alloys & Titanium; Steel
Primary Workpiece Material Code
P; S; K; M
Ansi Code
SDES130516N-PF K
Rake Angle
15.000
Manufacturers Catalog Number
SDES130516N-PF K IN4005
Cutter Series Compatibility
5J5P.R; 25J3P.R
Chip Breaker
PF
Cutting Direction
Neutral
Shape
Square
Insert Holding Method
Screw
Coating Classification
PVD
Single or Double Sided Insert
Single
Coating/Finish
AlCrO; TiAlN
Included Angle Degree
90
Length
13.00
Width (Mm - 2 Decimals)
13.00
Thickness (Decimal Inch - 4 Decimals)
0.2000
Multi-Use Tool
No
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Harvey Tool / Part #: 982909-C3
Item #: 82837550
Brand: Harvey Tool
Model #: 982909-C3Product Specifications
Mill Diameter (Inch)
9/64
Mill Diameter (Decimal Inch)
0.1406
End Mill Material
Solid Carbide
Coating/Finish
AlTiN
Chipbreaker
No
Number Of Flutes
4
End Type
Ball
Extended Reach
Yes
Helix Angle
30
Undercutting
No
Variable Index
No
Variable Helix
No
Shank Diameter (Inch)
3/16
Shank Diameter (Decimal Inch)
0.1875
Reach Length (Inch)
3/4
Reach Length (Decimal Inch)
0.7500
Overall Length (Inch)
2
Overall Length (Decimal Inch)
2.0000
Series
Miniature End Mills - Ball - Long Reach, Standard Flute
Flute Type
Spiral
Centercutting
Center Cutting
Shank Type
Round
Coolant Through
No
Length Of Cut (Decimal Inch - 4 Decimals)
0.4250
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Chamfer End Mill; 4 mm Dia. × 6 mm LOC × 6 mm Shank Dia. × 75 mm OAL ; 6 FL ; CBN ; Bright ; Series 2810
Item #: ER4520767
Brand: EMUGE-FRANKEN
Model #: 2810.004
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 4 mm |
| End Shape | Chamfer |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Application | | Finishing | |
| Depth of Cut Maximum (APMX) | 6 mm |
| Coolant Supply Property (CSP) | External |
| Overall Length (OAL) | 75 mm |
| Decimal Equivalent | 0.1575″ |
| Cutting Edge Material | CBN |
| Measurement Type | Metric |
| Coating | Bright |
| Series/List # | 2810 |
| Flute Count (NOF) | 6 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/16″ × 0.02″ × 0.062R 2-Flute Carbide Corner Rounding Endmill, AlTiN
Item #: KE11932000800
Brand: Keo
Model #: 932-000-800
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.02″ |
| Coating | AlTiN |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Flute Count (NOF) | 2 |
| Overall Length (OAL) | 2″ |
| Shank Type | Round |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) | 0.062″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HEV-RN-M-51000 APLUS COATED
Item #: HS1050452
Brand: Helical Solutions
Model #: 50452
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Neck Diameter (DN) | 0.95″ |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Neck Length (LN) | 2.125″ |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Length Group | 1D |
| Overall Length (OAL) | 6″ |
| Decimal Equivalent | 1″ |
| Coating | APLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 5 |
| Shank Length (LS) | 2.625″ |
| Applicable Material | | Steel | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.125″ Dia. × 0.125″ Shank × 0.5″ DOC × 2.5″ OAL, APLUS, 4 Flute, Ballnose End Mill
Item #: HS1056032
Brand: Helical Solutions
Model #: 56032
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Length Group | 4D |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Decimal Equivalent | 0.125″ |
| Overall Length (OAL) | 2-1/2″ |
| Measurement Type | Inch |
| Coating | APLUS |
| Shank Length (LS) | 2″ |
| Flute Count (NOF) | 4 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HST-R-30625-R.030 APLUS COATED
Item #: HS1008422
Brand: Helical Solutions
Model #: 08422
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Corner Radius (RE) | 0.03″ |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Length Group | 2.5D |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.625″ |
| Coating | APLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 2.375″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It